somogyi FLP 1000 Solar LED Reflector with Solar Panel Instruction Manual

somogyi FLP 1000 Solar LED Reflector with Solar Panel

Before using the product for the first time, please read the instruction manual below and retain it for further reference. The original instructions were written in Hungarian language.
This weather resistant, LED floodlight with motion sensor is perfect for illuminating buildings or yards. Solar powered design, it can be installed independently from mains power.

PARTS OF THE LUMINAIRE

1. floodlight with 60 pcs built-in high brightness SMD LEDs
2. PIR motion sensors
3. switches
4. battery holder lid
5. foldable console
6. screws, dowels, alien key

INSTALLATION, USE

1. Decide where you want to mount the motion sensor floodlight and the solar panel. Ideally, the solar panel must be exposed to direct sunlight.
2. Solar panel can fixed on wall or placed on horizontal surface. You can set the ideal tilt angle, when the sunlightfalls perpendicularly to the solar panel.
3. Use the enclosed Allen key to loosen and tighten the screws on the side of the appliance, you can adjust, then fix the tilt angle of the bracket this way.
4. The cona-ete anchor supplied with the product allows only fixing on cona-ete surface. If you want to fix the product on a different surface, use the appropriate sa-ews and dowels.
5. You can adjust the tilt angle of the LED panel, after adjusting it, fasten the screws on the side of the appliance.
6. Press the buttons on the back of the LED panel to switch the product on. 7. The PIR motion sensors detects a cone of 180′, up to 8 m distance.
7. button: to switch on or off the appliance.
8. button: the product switches on automatically at dusk and illuminates continuously at 20% brightness.
9. button: after dark, the product starts lighting automatically at full brightness for 30 seconds when it detects movement, then continues lighting at 3% brightness.
10. button: after dark, the product starts lighting automatically at full brightness for 30 seconds when it detects movement, then switches off.

CLEANING, MAINTENANCE

In order to ensure optimum functioning of the luminaire, the unit may require cleaning at least once a month, depending on the manner of use and degree of contamination. Clean the outer surface of the luminaire and the solar panel with a slightly moistened cloth. Do not use aggressive deaners! Avoid getting water inside of and on the electric components of the appliance.

TROUBLESHOOTING

1. Check the switch of the device! Clean the PIR sensorl
2. Check if the solar panel can get enough light.
3. Check the location and dean it!

WARNINGS

• Make sure the appliance has not been damaged during transport!
• Use only with the included solar panel, not with other power supply!
• Do not use the luminaire with damaged shielding!
• LED light source is not replaceable in the luminaire. By the end of the lifespan of the light source, the entire product has to be destroyed.
• The luminaire is not suitable for loop-in installation.

Do not stare into the light of the LED!
Waste equipment must be collected and disposed separately from household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of the product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.
DISPOSING OF ALKALINE AND RECHARGEABLE BATTERIES • Batteries, whether alkaline or rechargeable, must not be handled together with regular household waste. It is the legal obligation of the product’s user to dispose of batteries at a nearlby collection center or at a retail shop. This ensures that the batteries are ultimately neutralized in an environment-friendly way.

TECHNICAL DATA

• operational temperature: … -10 – +40 ‘C
• IP65 meaning: Protected against dust penetration. Protected against low pressure water jets (from all directions).
• accumulator: ………… 7200 mAh (Li-ion 18650 / 3, 7 V)
• output: …………….. 10 W (60 x2835 SMD LED)
• brightness: …………. 1000 Im
• color-temperature: …….. 6000 K
• detection angle: ………. 180′ conical
• detection distance: …….. 8 m
• size: ……………… 30 x 25 x 3,5 cm

Gyart6: SOMOGYI ELEKTRONIC®
H – 9027 • Gyor, Gesztenyefa Ot 3. • www.somogyi.hu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>