INTELLINET 561969 48 Port Gigabit Ethernet PoE Layer2 Managed Switch with Six 10G SFP+ Uplinks Instructions
- June 11, 2024
- INTELLINET
Table of Contents
INTELLINET 561969 48 Port Gigabit Ethernet PoE Layer2 Managed Switch with
Six 10G SFP+ Uplinks
Product Information
The 48-Port Gigabit Ethernet PoE+ Layer2+ Managed Switch with Six 10G SFP+ Uplinks (Model 561969) is a high-performance network switch manufactured by Intellinet Network Solutions. This switch comes with six 10G SFP+ uplinks, which provide high-speed connectivity to servers, storage devices, and other networking equipment. The switch is designed to deliver reliable and efficient performance, making it an ideal choice for businesses of all sizes.
Additional Benefits
Customers can register their product warranty by scanning the QR code on the cover or visiting register.intellinet-network.com/r/561969.
Specifications
For detailed specifications and user manual, visit intellinet-network.com.
Product Usage Instructions
Placement
To mount the switch in a rack:
- Disconnect any cables from the switch.
- Position a bracket over the mounting holes on one side of the switch and secure it in place with screws.
- Repeat Step 2 on the other side of the switch.
- Position the switch in the rack and screw the brackets to the rack.
- Reconnect any cables.
Chassis Ground Column
The grounding terminal connector, located on the side of the power supply connector, is used to provide proper grounding for your Intellinet Network Solutions switch. If you use the chassis grounding screw, it should be wired to an object that provides earth ground. In rackmount installations, grounding is typically provided by the metal frame of the mounting rack.
Connections
The switch has LED indicators for power, system status, and port connection. Press the CTRL button to alternate between Link or PoE Status.
Basic Web-Based Browser Management
- Open your Web browser.
- Enter http:// and the IP address of the switch in the Address field. The default management IP address is 192.168.2.1.
- Press Enter to display the login screen.
- In the Username field, enter admin; in the Password field, enter the serial number on the bottom of the switch. Click OK.
Model 561969 (IPS-54GM06-10G-450W)
Important: Read before use.
This guide presents the basic steps to set up and operate this device. For the user manual and specifications, visit intellinet-network.com. Register your product at register.intellinet-network.com/r/561969 or scan the QR code on the cover.
Placement
Prior to use, it is recommended that the switch be placed/positioned
- on a level surface that can support the weight of the switch (and any other items that need to be considered);
- with a minimum of 25 mm (approx. 1”) of clearance on the top and sides for adequate ventilation;
- away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
- where it cannot be affected by excessive moisture;
- within 100 m (approx. 328’) of network devices it’s to be connected to.
The switch includes brackets and screws for optional rack mounting.
- Disconnect any cables from the switch.
- Position a bracket over the mounting holes on one side of the switch and secure it in place with screws.
- Repeat Step 2 on the other side of the switch.
- Position the switch in the rack and screw the brackets to the rack.
- Reconnect any cables.
Chassis Ground Column
Located on the side of the power supply connector, a grounding terminal connector is used to provide proper grounding for your Intellinet Network Solutions switch. If you use the chassis grounding screw, it should be wired to an object that provides earth ground. In rackmount installations, grounding is typically provided by the metal frame of the mounting rack.
Connections
- All ports on the switch support Auto-MDI/MDI-X functionality, so you can use straight or crossover UTP/STP cables to connect the RJ45 ports to PCs, routers, hubs, other switches, etc.
- Cat5e/6/6a/8.x UTP/STP cables provide optimal performance; if a status LED doesn’t indicate a link or activity, check the corresponding device for proper setup and operation.
- Use the included power cable to connect the receptacle on the back of the switch to a power outlet, and confirm that the Power (PWR) LED lights.
LED| Color| Status| Operation
---|---|---|---
PWR| Green| Blinking| Unit is receiving power.
Off| Check connection.
RUN| Green| Blinking| System is booting.
On| System has booted successfully.
1–48
**Link/PoE***
|
Green
|
On
| Valid port connection. / The connected device (PD) is receiving power.
Blinking| Data transmitted/received.
Off| No link established. / No powered device (PD) is connected to the port.
49S–54S (SFP+)|
Green
| On| Valid port connection.
Blinking| Data transmitted/received.
Off| No link established.
NOTE : Press the CTRL button to alternate between Link or PoE Status.
Basic Web-Based Browser Management
- Open your Web browser.
- Enter http:// and the IP address of the switch in the Address field. The default management IP address is 192.168.2.1. 3 Press Enter to display the login screen. In the Username field, enter admin; in the Password field, enter the serial number on the bottom of the switch. Click OK.
WARRANTY
REGULATORY STATEMENTS
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications made to this equipment without the approval of the manuafacturer could result in the product not meeting the Class A limits, in which case the FCC could void the user’s authority to operate the equipment.
This device complies with the requirements of CE 2014/30/EU (UKCA Electromagnetic Compatibility Regulations 2016) and / or 2014/35/EU (UKCA Electrical Equipment [Safety] Regulations 2016). The Declaration of Conformity for is available at:
North America
IC Intracom America 550 Commerce Blvd. Oldsmar, FL 34677 USA
Asia & Africa
IC Intracom Asia 4-F, No. 77, Sec. 1, Xintai 5th Rd. Xizhi Dist., New Taipei
City 221, Taiwan
Asia & Africa
IC Intracom Asia 4-F, No. 77, Sec. 1, Xintai 5th Rd. Xizhi Dist., New Taipei
City 221, Taiwan
All trademarks and trade names are the property of their respective owners.
intellinet-network.com
All trademarks and trade names are the property of their respective owners. ©
IC Intracom. All rights reserved. Intellinet Network Solutions is a trademark
of IC Intracom, registered in the U.S. and other countries
Printed on recycled paper.
References
- Intellinet Network Solutions - Provider of PoE and Data Center Product
- Intellinet Network Solutions Account and Product Registration
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>