OneOdio OpenRock S Open-Ear Air Conduction Sport Earbuds Instructions

OneOdio OpenRock S Open-Ear Air Conduction Sport Earbuds

Product Information

Product Name: Open-Ear Air Conduction Sport Earbuds

Manufacturer: Oneodio

Website: www.oneodio.com

Email: info@oneodio.com

Contact Number: +4/DXK[fEf_&f/Ef[kf/KE

Product Usage Instructions

1. Ensure the earbuds are fully charged before use.
2. Place the earbuds in your ears, ensuring a comfortable fit.
3. Power on the earbuds by pressing the power button.
4. Connect the earbuds to your audio device using Bluetooth.
5. Adjust the volume using the volume controls on the earbuds or your audio device.
6. To play/pause music or answer/end calls, use the designated buttons on the earbuds.
7. If the earbuds do not fit securely, try changing the ear tips for a better fit.
8. To power off the earbuds, press and hold the power button.
9. When not in use, store the earbuds in their charging case to protect them from damage.
10. Refer to the user manual for more detailed instructions on advanced features and troubleshooting.

IMPORTANT SAFETY INSTRUCTIONS

Please read and keep all safety and use instructions.

WARNINGS/CAUTIONS

• Do NOT use the headphones at a high volume for any extended period.

  • To avoid hearing damage, use your headphones at a comfortable, moderate volume level.
  • Turn the volume down on your device before placing the headphones in/on your ears, then turn the volume up gradually until you reach a comfortable listening level.

• Do NOT use your headphones while driving for phone calls or any other purpose.

• Do NOT use the headphones at any time the inability to hear surrounding sounds may present a danger to yourself or others, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad, etc.

  • Remove the headphones, to ensure you can hear surrounding sounds, including alarms and warning signals.
  • Be aware of how sounds that you rely on as reminders or warnings may vary in character when using the headphones.

• Do NOT use the headphones if they emit any loud unusual noise. If this happens, turn the headphones off and contact OneOdio customer service.

• Remove headphones immediately if you experience a warming sensation or loss of audio.

• Do NOT use mobile phone adapters to connect headphones to airplane seat jacks, as this could result in injury or property damage due to overheating.

• Do NOT use the headphones as aviation communication headsets except in case of emergency.

  • No incoming audio will be heard with a discharged or improperly installed battery.This could result in the potential of missed communications whilepiloting an aircraft.
  • Extremely loud ambient noise levels commonto many propeller-driven aircraft may impair your ability to receive incoming audio communications, particularly during takeoff and climb out.
  • The headphones are not engineered for noise conditions, altitude, temperature or other environmental conditions common in non-commercial aircraft, resulting in possible interference to critical communications.
  • Contains small parts a which may be a choking hazard. Not suitable for children under age 3.
    This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.

• To reduce the risk of fire or electrical shock. do NOT expose this product to rain, liquids or moisture.

• Do NOT make unauthorized alterations to this product.

• a Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).

• Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).

FCC STATEMENT

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by YI ZHAO (SHENZHEN)
CO., LIMITED. could void the user’s authority to operate this equipment. This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation iS subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with FCC and Industry Canada radiation exposure limits set forth for general population. It must not be co-located or operating in conjunction with any other antenna or transmitter. Meets IMDA Requirements.

CAN ICES-3 (B)/NMB-3(B)

Management Regulation for Low-power Radio-frequency Devices

Article XII
According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices.

Article XIV
The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications operated in compliance with the Telecommunications Act.

The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices. DON’T attempt to remove the rechargeable lithium-ion battery from this product. Contact your local Oneodio retailer or other qualified professional for removal.
Y ZHAO (SHENZHEN CO, LIMITED. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.oneodio.com

REGULATORY INFORMATION

Information on electrical and electronic equipment
The following notice is aimed at private end users who use electricaland/or electronic devices.

1. Separate collection of old devices
   Electrical and electronic equipment that has become waste is referred to as waste equipment. Owners of old devices must collect them separately from unsorted municipal waste. In particular, old devices do not belong in household waste, but in special collection and return systems.

2. Batteries and rechargeable batteries
   As a rule, owners of old devices must separate old batteries and accumulators that are not enclosed by the old device from it before handing them over to a collection point. This does not apply if the old devices are handed over to public waste disposal authorities and are separated there from other old devices in order to prepare them for reuse.

3. Options for returning old devices
   If you own old devices, you can hand them over to the options set up and available by public waste disposal authorities for the purpose of proper disposal of old devices. It may also be possible to hand in electrical and electronic equipment there for the purpose of reusing the equipment. You can obtain more detailed information on this from the respective collection or collection point.

4. Privacy Notice
   Old devices often contain sensitive personal data. This applies in particular to information and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the old devices to be disposed of.

5. Meaning of the crossed-out dustbin symbol
   The symbol of a crossed-out garbage can, which is regularly shown on electrical and electronic devices, indicates that the device in question must be collected separately from unsorted municipal waste at the end of its service life.

The crossed-out wheeled bin symbol on batteries or accumulators means that they must not be disposed of with household waste at the end of their If useful life. If batteries or accumulators contain mercury (Hg), cadmium (Cd) or lead (Pb),
you will find the respective chemical symbol below the symbol of the crossed- out garbage can. You are legally obliged to return old batteries and accumulators after use. You can do this free of charge at a retail a store or at another collection point near you. Addresses of suitable collection points can be obtained from your city or local government.

Batteries may contain substances that are harmful to the environment and human health. Particular caution is required due to the special risks involved in handling lithium-containing batteries. The separate collection and recycling of old batteries and accumulators is intended to avoid negative effects on the environment and human health.
Please avoid generating waste from old batteries as much as possible, e.g. by giving preference to batteries with a longer lifespan or rechargeable batteries. Please avoid littering public spaces by not leaving batteries or battery-contain- ing electrical and electronic devices lying around. Please explore ways to recycle a battery instead of disposing of it, such as reconditioning or repairing the battery.

Charging temperature range: 0° C – 45° C
Discharging temperature range: -20° C – 60° C

UK Declaration of Conformity

Hereby, YI ZHAO (SHENZHEN) CO., LIMITED declares that the product type 80B is in compliance with following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK declaration of conformity is available at the following internet address: www.oneodio.com
info@oneodio.com

1. Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
2. Caution: risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
3. The device complies with RF specifications when the device used at 0mm form your body.
   Manufacturer’s Name: YI ZHAO (SHENZHEN) CO., LIMITED
   Product: Wireless headphone
   Model number: OpenRock S

C &E Connection E-Commerce (DE) GmbH
Add.: Zum Linnegraben 20, 65933,
Frankfurt am Main, Germany
Tel. +4906927246648
E-Mail: info@ce-connection.de

APEX CE SPECIALISTS LIMITED
Add.: 89 Princess Street, Manchester,
M1 4HT, UK
Tel. +441616371080
E-Mail: info@apex-ce.com

US Agent
TRANS-PAC CHINA LLC
Add.: 3715 S 182nd Street,
C120 Seatac, WA 98188-9993, US
Tel.: +1 818-818-0538
Email: lisaleeinchina@gmail.com

Manufacturer: YI ZHAO (SHENZHEN) CO., LIMITED
Add.: 6th Floor, T3 Creative Building, Shenzhen Colorful Huiwei Cuitural And Creative Expo City, No. 5010 Baoan Avenue, Caowei Community, Hangcheng Street, Baoan District, Shenzhen.

References

• OneOdio Headphones, Studio & DJ & Bluetooth, oneodio.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>