INTELLINET 509107 Industrial Gigabit Media Converter and PoE++ Injector Instructions
- June 3, 2024
- INTELLINET
Table of Contents
INTELLINET 509107 Industrial Gigabit Media Converter and PoE++ Injector
For additional benefits:
| Scan to register your
product warranty or go to: register.intellinet-
network.com/r/509107
---|---
Instructions
Features
- One 10/100/1000 RJ45 port supporting a maximum distance of 100 m (300 ft.)
- One SFP port for 1000Base-X optical transceiver modules and distances up to 120 km (75 mi.)
- Power over Ethernet injector function with output up to 90 watts
- IP30 slim-type metal housing to withstand harsh industrial conditions
- Option for DIN-rail installation
- One DC input (44 – 57 V) with terminal block
For specifications, visit intellinetnetwork.com. Register your product at register.intellinetnetwork.com/r/509107 or scan the QR code on the cover.
Placement
Desktop Installation
Prior to use, place/position the device:
- on a level surface that can support the device, with at least 25 mm (approx. 1”) of clearance for ventilation;
- away from sources of electrical noise: radios, transmitters, broadband amplifiers;
- within 100 m (approx. 328’) of RJ45 network devices it’s to be connected to.
DIN-Rail Installation
- Angle spring of mounting clip over top lip of DIN rail.
- Push device down till clip clicks onto rail.
- Ensure installation is stable.
Power
Chassis Ground Column
Located on the side of the power supply connector, a grounding terminal
connector is used to provide proper grounding for your switch. It should be
wired to an object that provides earth ground.
Terminal Block Installation (DC Input 44 – 57 V)
NOTE : Ensure all power is off/disconnected before beginning! The wire gauge for the terminal block should be in the range between 12 – 24 AWG. It is recommended to use a cable with a current capacity of more than 6 A.
- Loosen appropriate screws. Insert bare power-supply wires into appropriate terminals (positive wire into positive [V+] terminal, negative wire into negative [V–] terminal, ground wire to ground terminal).
- Tighten appropriate screws to secure wires.
- Install block into the device.
Setup
This product requires an SFP transceiver module that provides fiber optic connections.
- Insert the transceiver into the media converter and route the fiber optic cable into the transceiver.
- Route the other end of the fiber optic cable into a suitable port in your fiber optic network. Maximum length and fiber cable specification depend on the model.
RJ45 & PoE
Connect the UTP port of the media converter to powered RJ45 device; e.g., to a network camera. Cat5e or better cabling is recommended. The Intellinet Industrial Gigabit Media Converter and PoE++ Injector complies with IEEE 802.3bt/at/af standards. The device can supply up to 90 watts of power to a PoE-compliant powered device.
LED Status
LED
|
Function
|
Status
|
Description
---|---|---|---
FX – LNK| Fiber link LED| On| Fiber port is connected.
Off| Fiber port is not connected.
Flashing| Sending or receiving data.
TP – LNK| Copper link LED| On| Valid port connection.
Off| Connection not established.
Flashing| Sending or receiving data.
FDX| Copper link Full/ Half Duplex LED| On| Full-duplex mode
Off| Half-duplex mode
TP – 1000| Network speed LED| On| Network speeds at 1000 Mbps
Off| Network speeds at 100 Mbps
LFP| Fiber link – Link Fault Pass-through| On| Two communication devices
connected and functioning normally
Off| Two communication devices connected, one with a link failure near the end
TP – PoE| PoE LED| On| PoE is being supplied to a connected PD.
Off| No power is being supplied to a connected PD.
DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT
(Applicable In The European Union And Other European Countries With Separate Collection Systems)
| This symbol on the product or its packaging means that this product must not
be treated as unsorted household waste. In accordance with EU Directive
2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this
electrical product must be disposed of in accordance with the user’s local
regulations for electrical or electronic waste. Please dispose of this product
by returning it to your local point of sale or recycling pickup point in your
municipality.
---|---
WARRANTY AT:intellinet-network.com
REGULATORY STATEMENTS
Class A
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications made to this equipment without the approval of the manufacturer could result in the product not meeting the Class A limits, in which case the FCC could void the user’s authority to operate the equipment.
CE
This device complies with the requirements of CE 2014/30/EU (UKCA Electromagnetic Compatibility Regulations 2016) and / or 2014/35/EU (UKCA Electrical Equipment [Safety] Regulations 2016). The Declaration of Conformity for is available at: support.intellinet- network.com/barcode/509107
IC Intracom America
550 Commerce Blvd.
Oldsmar, FL 34677, USA
Asia & Africa
IC Intracom Asia
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221, Taiwan
Europe
IC Intracom Europe
Löhbacher Str. 7, D-56553
Halver, Germany
intellinet-network.com
All trademarks and trade names are the property of their respective owners. ©
IC Intracom. All rights reserved. Intellinet Network Solutions is a trademark
of IC Intracom, registered in the U.S. and other countries.
References
- Intellinet Network Solutions - Provider of PoE and Data Center Product
- DropCatch.com
- Intellinet Network Solutions Account and Product Registration