INTELLINET 561167-V3 8-Port Gigabit Ethernet PoE+ WebManaged Switch Instructions

: June 3, 2024
: INTELLINET

Table of Contents

INTELLINET 561167-V3 8-Port Gigabit Ethernet PoE+ WebManaged Switch
Instructions
Connections
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

INTELLINET 561167-V3 8-Port Gigabit Ethernet PoE+ WebManaged Switch

Instructions

This guide presents the basic steps to set up and operate this device. For the user manual and specifications, visit intellinetnetwork.com. Register your product at
register.intellinet-network.com/r/561167 or scan the QR code on the cover.

Placement

Prior to use, it is recommended that the switch be placed/positioned:

on a level surface that can support the weight of the switch (and any other items that need to be considered);
with a minimum of 25 mm (approx. 1”) of clearance on the top and sides for adequate ventilation;
away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
within 100 m (approx. 328’) of network devices it’s to be connected to;
where it cannot be affected by excessive moisture.

The switch includes brackets and screws for optional rack mounting.

Disconnect any cables from the switch.
Position a bracket over the mounting holes on one side of the switch and secure it in place with screws.
Repeat Step 2 on the other side of the switch.
Position the switch in the rack and screw the brackets to the rack.
Reconnect any cables.

Chassis Ground Column

Located on the side of the power supply connector, a grounding terminal connector is used to provide proper grounding for your switch. It should be wired to an object that provides earth ground.

Connections

All ports on the switch support Auto-MDI/MDI-X functionality, so you can use straight or crossover UTP/STP cables to connect the RJ45 ports to PCs, routers, hubs, other switches, etc.
Use the included power cable to connect the receptacle on the back of the switch to a power outlet, and confirm that the Power LED lights.
Cat5e/6/6a/8.x UTP/STP cables provide optimal performance; if a status LED doesn’t indicate a link or activity, check the corresponding device for proper setup and operation.
LED| Color| Status| Description
---|---|---|---
PWR| Green| On| Unit is receiving power.
Off| Check connection.
SYS| Green| Blinking| System is normal.
Off| System not started.

Link/Act/Speed 1–8

|

10/100M: Orange; 1000M: Green

| On| Valid port connection.
Blinking| Data transmitted/received.
Off| No link established.

PoE 1–8

|

Orange

| On| The connected powered device (PD) is receiving power.
Blinking| Abnormal power supply.
Off| No PD device is linked.

9 – 10 (SFPs)

|

Green

| On| Valid port connection.
Blinking| Data transmitted/received.
Off| No link established.

Basic Web-Based Browser Management

Open your Web browser.
Enter http:// and the IP address of the switch in the Address field. The default management IP address is 192.168.2.1.
Press Enter to display the login screen. In the Username field, enter admin; in the Password field, enter the serial number on the bottom of the switch. Click OK.

WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT
(Applicable In The European Union And Other European Countries With Separate Collection Systems)

This symbol on the product or its packaging means that this product must not be treated as unsorted household waste. In accordance with EU Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this electrical product must be disposed of in accordance with the user’s local regulations for electrical or electronic waste. Please dispose of this product by returning it to your local point of sale or recycling pickup point in your municipality.

WARRANTY AT : intellinet-network.com

REGULATORY STATEMENTS

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications made to this equipment without the approval of the manuafacturer could result in the product not meeting the Class A limits, in which case the FCC could void the user’s authority to operate the equipment.

CE/UKCA

This device complies with the requirements of CE 2014/30/EU (UKCA Electromagnetic Compatibility Regulations 2016) and / or 2014/35/EU (UKCA Electrical Equipment
[Safety] Regulations 2016). The Declaration of Conformity for is available at: support.intellinet-network.com/barcode/561167

North America
IC Intracom America
550 Commerce Blvd.
Oldsmar, FL 34677 USA

Asia & Africa
IC Intracom Asia
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221, Taiwan

Europe
IC Intracom Europe
Löhbacher Str. 7, D-58553
Halver, Germany.

All trademarks and trade names are the property of their respective owners. © IC Intracom. All rights reserved. Intellinet Network Solutions is a trademark of IC Intracom, registered in the U.S. and other countries.