sbl BRI819P-B-D Fixture-Mounted Motion Sensor User Manual
- June 5, 2024
- sbl
Table of Contents
sbl BRI819P-B-D Fixture-Mounted Motion Sensor
Safety and Notes
- Product should be installed and serviced in accordance with applicable national, state, and local building and electrical codes.
- To reduce the risk of electric shock, ensure that the main power source and circuit breakers are switched off before performing any installation or wiring procedures.
Specifications
| Model | BRI819P-B-D |
|---|---|
| Maximum Detection Radius | 30 ft (9.14 m) |
| Maximum Mounting Height | 40 ft (12.2 m) |
| Operating Temperature | -40°–167° F (-40°–75° C) |
| Dimming | 0–10 V ¹ |
Check product label for specific electrical specifications related to installation. Improper installation will void warranty. ¹Lights that use a 1–10 V dimming driver will not completely turn off when at the zero setting on the sensor.
DIP Switch Settings
Setting| Sensitivity| Time| Light| Standby Level|
Standby Time
---|---|---|---|---|---
Switch Pair Position| 1 and 2| 3 and 4| 5 and 6| 7 and
8| 9 and 10
| ****
20%
| ****
10 seconds
| ****
disabled
| ****
0
| ****
always on
| ****
50%
| ****
1 minute
| ****
10 lx
| ****
10
| ****
1 minute
| ****
75%
| ****
5 minute
| ****
30 lx
| ****
30
| ****
30 minute
| ****
100%
| ****
15 minute
| ****
50 lx
| ****
50
| ****
60 minute
Sensitivity adjusts detection area. Time adjusts the amount of time between when motion is detected and when the light enters standby mode. Light adjusts the daylight threshold which allows the light to stay off if motion is detected and the room is already sufficiently illuminated. Standby Level adjusts the dimming level of the light during standby mode. It should be noted that “0” setting on a 1–10 V light will result in the light being set at 10% as the driver in this case cannot dim beyond this level. Standby Time adjusts the amount of time the light stays in standby mode before shutting off completely.
Sensor Coverage
Wiring Diagram
- Rev Date: V1 07/15/2021 4400 Earth City Expy, St. Louis, MO 63045
- 866-590-3533
- superbrightleds.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>