INTELLINET PoE-Powered 5 Port Gigabit Switch with PoE Passthrought Instructions

June 3, 2024
INTELLINET

INTELLINET PoE-Powered 5 Port Gigabit Switch with PoE

INTELLINET-PoE-Powered-5-Port-Gigabit-Switch-with-Po--Passthrought-
PRODUCT

Instructions

The 5-Port Gigabit PoE Passthrough Switch is designed to take power from a PoE switch and pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with five Gigabit Ethernet ports, this switch can: power up to four wireless LAN access points and bridges, VoIP phones and/or IP video cameras; draw its own power from the PoE switch it’s connected to; and deliver network speeds of up to 1,000 Mbps. When you connect the PD port (Port 1) to a PoE-enabled, IEEE 802.3af/at- compliant PoE switch, the Intellinet Network Solutions PoE-Powered 5-Port Gigabit Switch uses some of the electric current to power itself (4 watts) and passes the available surplus power to up to four PoE edge devices, such as IP cameras, allowing you to realize the full potential of each of the PSE ports in your data center. For specifications, go to intellinetnetwork.com. Register your product at the register. intellinet-network.com/r/561082 or scan the QR code on the cover.

Front Panel

INTELLINET-PoE-Powered-5-Port-Gigabit-Switch-with-Po--Passthrought-
FIG2

LED Color Status Status Description

PWR

| ****

Green

| Off| No power is supplied to the switch.
On| Power is supplied via the AC adapter or the PD port.


Link/Act

| ****

Green

| Off| No network link is established.
On| A network link has been established.
Flashing| A network link has been established and data packets are being sent and received.


PoE

| ****

Green

| Off| Port is not supplying power to a connected PoE device.
On| Port is supplying power to a connected PoE device.

Rear Panel

INTELLINET-PoE-Powered-5-Port-Gigabit-Switch-with-Po--Passthrought-
FIG3

This switch is equipped with five Gigabit ports, a power connector and an on/off switch. Each of the four PSE ports (Ports 2-5) can provide up to 30 watts. The product is compliant with IEEE 802.3af and IEEE 802.3at standards and can be powered either by the included adapter or via PoE.

Item Description

1

| PD (powered device) port. When connected to a IEEE 802.3af/at-compliant PoE injector, midspan or PoE switch, this switch will draw power from that device; the included power adapter does not need to be used. This port can

also be connected to any standard Ethernet port.

2-5

| PSE (power sourcing equipment) ports — compliant with IEEE 802.3af/at — that you can connect to PoE devices such as VoIP phones and network cameras. Any Ethernet-compatible non-PoE device can also be connected to these 4 ports.
DC| The included power adapter can be connected here.
| / O| Press | to turn the switch on; press O to turn it off .

Power

If using this switch as a passthrough power source for PoE devices on Ports 2, 3, 4 and 5, the PD port (1) on this switch can receive up to 30 watts of power from a connected PoE injector or PoE switch. Since this switch uses up to 4 watts of the potential incoming 30, roughly 26 watts is available for the four ports, which is an average of 6.5 watts. That is enough to power as many as four network cameras or VoIP phones (as long as they do not need more power than the remaining watts). To add a device such as a high-performance Gigabit Wireless AC access point that needs a lot more power, use the included external adapter. When connected, the maximum power budget rises from 26 watts to 60 watts.

Powered by Power Available for PoE Devices Connected to Ports 2–5
Port 1 (PD port) only 26 watts total
Power adapter 60 watts total

Setup

Connect Port 1 to a PoE injector or PoE switch to power as many as four PoE devices. You can use the external power adapter if you do not have a PoE injector or switch or if you require the additional power budget the external power adapter provides.INTELLINET-PoE-Powered-5-Port-Gigabit-Switch-with-Po
--Passthrought-FIG4

  • = PD (powered device) Power & Data
  • = PSE (power sourcing equipment) Power & Data

WASTE ELECTRICAL & ELECTRONIC EQUIPMENT

Disposal of Electric Equipment (applicable in the E.U. and other countries with separate collection systems)

This symbol on the product or its packaging means that this product must not be treated as unsorted household waste. In accordance with EU Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), this electrical product must be disposed of in accordance with the user’s local regulations for electrical or electronic waste. Please dispose of this product by returning it to your local point of sale or recycling pickup point in your municipality.

WARRANTY

intellinet-network.com

REGULATORY STATEMENTS

FCC Class A
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. Any changes or modifications made to this equipment without the approval of the manufacturer could result in the product not meeting the Class A limits, in which case the FCC could void the user’s authority to operate the equipment.

CE/UKCA

This device complies with the requirements of CE 2014/30/EU (UKCA Electromagnetic Compatibility Regulations 2016) and / or 2014/35/EU (UKCA Electrical Equipment [Safety] Regulations 2016). The Declaration of Conformity for is available at:

North America
IC Intracom America
550 Commerce Blvd.
Oldsmar, FL 34677
USA

Asia & Africa
IC Intracom Asia
4-F, No. 77, Sec. 1, Xintai 5th Rd.
Xizhi Dist., New Taipei City 221
Taiwan

Europe
IC Intracom Europe
Löhbacher Str. 7, D-58553
Halver
Germany

All trademarks and trade names are the property of their respective owners. © IC Intracom. All rights reserved. Intellinet Network Solutions is a trademark of IC Intracom, registered in the U.S. and other countries.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

INTELLINET User Manuals

Related Manuals