QUOIZEL TF5623MBK Westwind 22.5 Inch Matte Black Table Lamp with Tiffany Glass Shade Installation Guide
- October 30, 2023
- QUOIZEL
Table of Contents
QUOIZEL TF5623MBK Westwind 22.5 Inch Matte Black Table Lamp with Tiffany
Glass Shade
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, install or operate the product.
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
- RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
- For your safety, read instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Turn off electricity to fixture before replacing the bulb(s).
CARE OF TIFFANY-STYLE SHADE
A new Tiffany lamp shade has an oil film applied to the shade that protects the Tiffany shade from scratches during shipment. If the oil applied is too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil. For general cleaning of Tiffany shades use a gentle lemon oil- based furniture polish applied to a soft cloth and wipe gently. If a white powder appears on the soldered joints of the Tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or mineral oil applied directly to oxidized areas and the soldered area will return to like new.
CARE AND MAINTENANCE
- Wipe clean using soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00 am – 5:00 pm EST), or visit us online at www.quoizel.com.
PACKAGE CONTENTS
INSTALLATION
Install Base and Socket Assembly together
- Pull the cable out of the base from the base during assembly.
Install Bulbs
Install two correct bulbs referring to fixture markings and/or labels for
maximum wattage.
Recommended Bulb Type (not included):
Install Nipple with Hex Nut
Install Spacer Tube and Check Ring
Install Shade
- Make sure the shade, sockets and base are in the same orientation after assembly (refer to the following diagram).
Your installation is now complete! Restore electricity and save this sheet for future reference.