ALOGIC EPLSWCBK Elite Power Laptop Stand with Wireless Charger User Manual
- June 11, 2024
- ALOGIC
Table of Contents
ALOGIC EPLSWCBK Elite Power Laptop Stand with Wireless Charger
Specifications
| Model | EPLSWCBK |
|---|---|
| Dimensions | 40 x 260x 280mm (H x Dx\/’I) |
| Weight | 1.2kg |
| Input | USB-C DC 9V/1.67A |
| Warranty | Wireless Output 5V/2A (10WMax) |
| Warranty | 2Years |
Warning
- This device is designed for indoors use only and to be kept dry.
- Do not deliberately damage the device or expose it to damp, direct sunlight, or high temperature conditions.
- Disassembling or failing to properly use and care for your device will void the warranty on the product.
- ALOGIC bears no responsibility for damage to the device or incidental damages arising from improper use or lack of care and is not liable for repair/replacement of the device or other damages in these circumstances.
- Wireless Charging Pad
- USB-C Port
Package Contents
Instructions
(Refer to the images on the previous page)
The Elite Power Laptop Stand is a high-quality aluminium laptop stand designed to support 11-1r laptops. In addition to adjusting the height and angle of your laptop to minimize neck fatigue, it features a Qi wireless charging pad in the base.
-
Adjusting the Height
The Elite Power Laptop Stand’s height can be adjusted by moving the plate upwards or downwards. -
Adjusting the Angle
The Elite Power Laptop Stand’s angle can be adjusted by tilting the plate to the desired degree. -
Place the Laptop or MacBook on the stand
After the angle and height has been set, simply place the laptop or MacBook onto the Laptop Stand.
Charge your devices wirelessly -
Connect the supplied cable to the USB-C port
1and connect the other end to a
USB-A power adapter (18W or higher). -
Place your Qi wireless charging compatible device (including iPhones 8-14, Android
phones, AirPods 2/3/Pro, etc) on top of the bottom wireless charging pad 2 ). Your
device will automatically start charging.
Troubleshooting
| Symptom | Solution |
|---|---|
| Phone is not charging consistently |
- Check that you are using suitable USB-A wall adapter. It must support power delivery and output 18W or more power
- Thick cases can interfere with wireless charging – try removing your device from the case while charging
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and , if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. In order to avoid the possibility of exceeding the
FCC radio frequency ex2osure limits, Human proximity to the antenna shall not
be less than 20cm(8 inches)during normal Oration.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>