Enerlites 62001-TR Duplex Tamper Resistant Receptacle Diagram Installation Guide
- June 14, 2024
- ENERLITES
Table of Contents
Duplex Tamper Resistant Receptacle Diagram
Installation Instructions
|
---|---
Receptacle Instructions
NOTICE : For installation by a qualified person in accordance with
national and local electrical codes.
WARNING : Risk of Electric Shock or Death. Disconnect power before
installing.
CAUTION : USE COPPER CONDUCTORS ONLY; 20A, 10AWG to 12AWG.
-
Remove insulation from conductors 1/2 inch.
-
Side Wire: Wrap conductor securely around terminal screw.
Tighten terminal screws securely, terminal tightening torque is 14 lbf-in(1.6 N·m). -
Back-wiring clamps accept up to No.12 copper or copper – clad wire.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>