YEELIGHT YLFWD-0019 Candela Lamp User Manual
- June 12, 2024
- Yeelight
Table of Contents
YEELIGHT YLFWD-0019 Candela Lamp
Introduction
Instruction
-
Take out the lamp from the package, toggle the bottom switch to “On”, the product enters the constant light mode. Under this mode, your can adjust the brightness of the lamp by rotating the lampshade: Rotate clockwise to brighten and counterclockwise to darken.
-
Toggle the bottom switch to “Breathe”, the product enters breathing mode
-
Charging
-
Insert the USB charging cable into the Type-C charging port at the bottom of the lamp, and then turn on the power. The bottom charging indicator shows red to indicate that the battery is being charged, and the indicator will turn off when the battery is fully charged.
-
If the lamp does not respond when turning the bottom switch to “On” or “Breathe”, please charge the lamp first and wait for a few minutes before starting to use it.
Low battery alert: When the battery of the product is low, the light enters the fast breathing state, the process will last nearly 20 seconds, please charge the product in time.
Note: When the product is not used for a long time, please charge the product regularly. When the product has been in a state of power loss for a long time, please charge it continuously for more than 10 minutes before use to avoid insufficient voltage, which will affect normal use.
Notes:
- The lamp does not come with a power adapter, please use a DC5V/1 A power adapter that meets the safety requirements for charging.
- Do not use the power adapters or other devices with an output voltage greater than 5V for charging.
- The product shall be supplied with a certified independent SELV LED driver complying with IEC/EN. 61347-2-13 with output voltage (5V)and at least equal to the rated power of this product.
Parameters
Model:YLFWD-0019 Power:5W
Brightness range: 1%-100% Input:5V 1A
Battery :Li-polymer battery 3.7V 2500mAh
Features
| | 
| 
---|---|---|---
Adjustable brightness| Infinitely rotating
adjustment| the most beautiful
appearance| Portable and
convenient
| 
| 
|
charging and plugging dual-use| Long battery life| Candlelight
atmosphere| Constant light /
Breathing dual mode
Warning
- Before using, please make sure the voltage is in line with the working voltage of this product. Using inappropriate voltage may damage this product and cause safety hazards.
- Do not dismantle this product without permission as its LED module cannot be replaced. When the light source reaches its useful life, the entire lamp should be replaced.
- This product will generate heat during operation. Please keep the convection of surrounding air in order to facilitate heat dissipate
- The product is not waterproof, please don’ t use it under the condition of super incurring temperature and humidity.
- The built-in battery of this product is not replaceable.
- The charging operation must be carried out in a dry indoor environment.
- For indoor use only.
EU Declaration of Conformity
We Qingdao Yeelink Information Technology Co., Ltd., hereby, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments.
UK Declaration of Conformity
We QINGDAO YEELINK INFORMATION TECHNOLOGY CO., LTD., Hereby, declares that this equipment is in compliance with the applicable Directives and UK Norms, and amendments.
WEEE Disposal and Recycling
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.