CENTEK CT-2507 Vacuum Cleaner Instruction Manual

June 11, 2024
CENTEK

CENTEK CT-2507 Vacuum Cleaner

DEAR CUSTOMER!

Prior to operating the appliance, please carefully read the present manual which contains important information regarding its proper and safe operation. Take care not to lose the present manual. The manufacturer will not be responsible for any damage resulting from improper use of the appliance or from non-observance of the instructions and provisions of the present manual, as well as from attempts by unskilled persons at repairing the appliance.
Should You decide to transfer the appliance to another person, please pass the present manual over along with it.

PURPOSE OF THE DEVICE
For cleaning dust and dirt from hard and soft surfaces (hard floor, carpet, etc.).
The vacuum cleaner is a home appliance and is not designed for industrial applications.

SAFETY PRECAUTIONS

The following requirements should be strictly observed in order to avoid situations hazardous for human life and health, as well as premature failures of the appliance:

  1. Carefully read the present manual prior to operating the appliance. Retain the present manual, cash voucher and appliance packaging.
  2. Ensure that the power supply grid voltage corresponds to the one indicated on the data plate of the appliance before operating it.
  3. Connect the appliance only to power grid sockets equipped with earthing contacts, use only two-pole extension cables with 10A rating and an earthing conductor.
  4. Always pull the plug from the power socket after use and prior to any cleaning and maintenance operations.
  5. Pull the plug from the power socket before opening the dust collector lid.
  6. Do not pull or carry the appliance by the power cable.
  7. Do not use ethyl alcohol and other solvents for cleaning the appliance.
  8. Do not use the appliance for collecting liquids.
  9. Only the use of original spare parts is allowed. Do not use accessories which are not included in the scope of supply.
  10. Do not turn the appliance on if it is damaged or malfunctioning.
  11. Do not operate the appliance if its power cable or plug is damaged, if doesn’t run smoothly or has been dropped.
  12. Do not attempt to repair the appliance yourselves.
  13. Regularly check the appliance and its power cable for damage. Operating a damaged appliance is not allowed. Do not attempt to repair the appliance yourselves, apply to certified technicians. If the power cable is damaged it should be replaced by the Manufacturer, a service facility or other skilled personnel.
  14. Do not submerge the appliance in water or any other liquids.
  15. Ensure that the power cable does not touch sharp edges and hot surfaces.
  16. The appliance should not be used by physically, sensory or mentally handicapped persons (including children) or by persons without sufficient experience or knowledge, unless such persons are under supervision, or have been instructed on the use of the appliance, by the persons responsible for their safety. Take precautions not to children play with the appliance.
  17. Special instructions for transportation (shipment) and sale: none.
    Do not place the unit near heat sources
    Do not run the unit over its power cable
    Do not use the unit to collect smoldering matches, cigarette stubs and smoldering ashes

    Do not use the unit on wet surfaces
    Do not obstruct the air exhaust grille
    Do not use the unit to collect needles, drawing pins, paper clips, etc.

APPLIANCE DESCRIPTION

  1. Floor brush
  2. Tube
  3. Handle
  4. Air flow regulator
  5. Hose
  6. Dust collector lid
  7. Connecting coupling
  8. Clogging indicator
  9. Cable retract button
  10. ON/OFF button

SCOPE OF SUPPLY

  • Vacuum Cleaner – 1 pc.
  • Dust Collection Bag – 1 pc.
  • Hose – 1 pc.
  • Tube – 1 pc. (СТ-2507 BLUE), 2 pcs. (СТ-2507 RED)
  • Two-position Brush – 1 pc.
  • Slot Brush – 1 pc.
  • Hard Foam Intake Filter – 1 pc.
  • Hard Foam Outlet Filter – 1 pc.
  • User Manual – 1 pc.

OPERATION

VACUUM CLEANER ASSEMBLY. HOSE ATTACHMENT

To connect the flexible hose, press the button on the coupling and insert the hose into the intake opening on the vacuum cleaner.

INSTALLATION OF TELESCOPIC TUBE AND ATTACHMENTS (BRUSHES)

Attach the tube to the handle

|

Adjust tube length (for model CT-2507 blue)

|

Attach the desired attachment to the tube

---|---|---

OPERATION START
  1. Prior to operation start pull out the power cable to the desired length and insert the plug into the power socket. do not pull out the cable beyond the red mark. to retract the cable press the wind up while holding the cable with your hand for safety.
  2. Turn the vacuum cleaner on and off by pressing the on/off button.
USING THE ATTACHMENTS

TWO-POSITION BRUSH FOR FLOOR AND CARPETS
Pos. 1 : brushes extended – for solid floors.
Pos. 2 : brushes retracted – for carpet cleaning.

SLOT BRUSH
For cleaning heating radiators, corners, tight spaces, drawers, etc.

MAINTENANCE

Your vacuum cleaner is equipped with 2 filters:

  1. Hard foam intake filter.
  2. Hard foam outlet filter.
    Each of these filters requires maintenance and regular replacement.

FILTER MAINTENANCE
The filters should be cleaned after each use of the vacuum cleaner. shake the filters to clean them from dust. if the vacuum cleaner is used with medium intensity (15 to 20 minutes 2 to 3 times a week) replace the filters every 6 months.

ATTENTION!
Do not wash the filters in a washing machine or dry them with a hair fan or other heating appliances.
Do not turn the vacuum cleaner on without the filters installed, as this can result in motor damage.

DUST COLLECTOR CLEANING
  1. Turn off the unit and disconnect the hose.
  2. Open the front lid and remove the dust collector.
  3. Remove the dust and debris from the dust collector.

ATTENTION!
The dust collector should be cleaned after each use of the vacuum cleaner. Failure to do so may result in decreased suction capacity and failure of the vacuum cleaner. We strongly recommend observing these maintenance requirements – this will ensure the highest suction capacity and proper operation of your CENTEK vacuum cleaner. This will also be an obligatory prerequisite for free of charge guarantee maintenance.

SPECIFICATION

  • Rated voltage: 220-240 V ~50/60 Hz
  • Nominal power rating: 1200 W
  • Max power rating: 1800 W
  • Suction capacity: 350 W

DISPOSAL

Upon expiry of its service life the appliance can be disposed of separately from ordinary domestic waste. You can turn it over to a specialized electric and electronic appliance disposal and recycling centre.

CERTIFICATION DATA, GUARANTEE

The service life of this item is 5 years since the date of sale to the end user, provided the item will be used in strict accordance with the present manual and the applicable technical standards. Upon expiry of the service life please contact the nearest authorized service centre for suggestions as to further operation of the appliance. The manufacturing date of the appliance is integrated into the serial number (digits 2 and 3 – year, digits 4 and 5 – month of manufacture). If any questions related to appliance maintenance should arise, or if the appliance has malfunctions, apply to the CENTEK TM Authorized Service Center. The address of the service center can be found on the website https://centek.ru/servis. Service support contacts: Phone: +7 (988) 24-00-178, VK: vk.com/centek_krd. General Service Center: OOO «LarinaServis», Krasnodar, Phone: +7 (861) 991-05-42.
The product is provided with the Certificate of Conformity No ЕАЭС RU С-CN.ВЕ02.В.02216/20 of 28.04.2020.

MANUFACTURER AND IMPORTER INFORMATION

I mported to EAEU by: Individualniy Predprinimatel Asrumyan Karo Shurikovich. Address: Russia, 350912 Krasnodar, ul. Atamana Lysenko, 23, pgt. Pashkovskiy, phone: +7 (861) 2-600-900.

DEAR VALUED CONSUMER!
The guarantee period for all appliances amounts to 12 months since the date of sale to the end consumer. With this Warranty Card the Manufacturer confirms the proper condition of the appliance and undertakes to repair, free of charge, all defects caused by the Manufacturer’s default.

GUARANTEE MAINTENANCE TERMS

  1. The guarantee shall be valid if the following documentation conditions are observed:
    – The original Warranty Card shall be filled out correctly and clearly, indicating the of appliance model, serial number and sale date, the stamp of the seller company and signature of its representative shall be available, as well as the stamps on each coupon and the buyer’s signature in the Warranty Card.
    The Manufacturer reserves the right to reject guarantee maintenance if the buyer fails to provide the abovementioned documents or if the information contained therein is incomplete, illegible or ambiguous.

  2. The guarantee shall be valid if the following operation conditions are observed:
    – the appliance is used in strict accordance with the present manual;
    – the safety rules and requirements are observed.

  3. The guarantee does not apply to regular maintenance, cleaning, installation and setup of the appliance at the owner’s location.

  4. The guarantee does not apply in the following cases:
    – mechanical damage;
    – normal wear of the appliance;
    – non-observance of operation requirements or erroneous actions on the part of the user;
    – improper installation or transportation;
    – natural disasters (lightning, fire, flood, etc.), as well as any other causes beyond the Manufacturer’s or Seller’s control;
    – ingress of foreign objects, liquids or insects into the inside of the appliance;
    – repairs or modifications to the appliance by unauthorized persons;
    – use of the appliance for commercial purposes (loads exceeding normal domestic application), connection of the appliance to utility and telecommunication networks incompliant with national technical standards;
    – failure of the following accessories, if replacement of these is allowed by design and does not involve disassembly of the appliance:
    a) remote control units, rechargeable batteries, replaceable batteries (power cells), external power supply units and chargers;
    b) consumables and accessories (packaging, covers, slings, carry bags, mesh screens, blades, flasks, plates, supports, grilles, spits, hoses, tubes, brushes, nozzles, dust collectors, filters, smell absorbers);
    – for battery-powered appliances – operation with inappropriate or depleted batteries;
    – for rechargeable battery-powered appliances – any damage caused by improper battery charging and recharging.

  5. The present guarantee is provided by the Manufacturer in addition to the consumer rights determined by the applicable legislation and does not limit these rights in any way.

  6. The Manufacturer shall not be made liable for possible damage, directly or indirectly inflicted by CENTEK brand products on people, domestic animals, the consumer’s or third persons’ property if such damage is inflicted as the result of non-observance of appliance installation and operation requirements, deliberate or negligent actions (omission) by the consumer or third persons, as well as of force majeure circumstances.

  7. Service centers will only accept appliances in a clean state (there should be no food residues, dust and other contamination on the appliance).
    The Manufacturer reserves the right to change the design and specifications of the appliance without prior notice.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals