LENA LIGHTING ALTEZZO A Outdoor Lamp Instruction Manual
- May 15, 2024
- LENA LIGHTING
Table of Contents
LENA LIGHTING ALTEZZO A Outdoor Lamp
Product Specifications
- Model: ALTEZZO A
- Dimensions: 150mm x 120mm
- IP Rating: IP65
Product Usage Instructions
Installation
- Ensure that the product is placed in a suitable location according to the installation instructions.
- Check for the presence of a foundation and mounting screws. If not included, source them separately.
- Unscrew X4 screws to remove the product from the packaging.
- Follow the specific installation steps provided in the manual for your model (ALTEZZO A 150 or ALTEZZO A 120).
- Securely mount the product using appropriate screws and ensure it is fixed properly.
Maintenance
Regularly inspect the product for any signs of damage or wear. Clean the
surface as needed with a soft cloth and mild detergent.
Usage
Operate the product according to the intended purpose as described in the
user manual. Avoid exposing the product to extreme conditions that may affect
its performance.
Frequently Asked Questions (FAQ)
-
Q: What should I do if the product is not working?
A: Check the power source and connections. If the issue persists, refer to the troubleshooting section in the user manual or contact customer support. -
Q: Can the product be used outdoors?
A: Yes, the product has an IP65 rating, making it suitable for outdoor use. However, ensure it is installed correctly to prevent water or dust ingress.
INSTALLATION INSTRUCTION
- We would like to inform you that our product’s are marked in accordance with the European Directive 2002/96/CE and Polish Act on used electric and electronic equipment with a sign of a crossed-out waste container:
- This mark informs abort the fact that the device, after its application use, cannot be placed together with other types of household waste.
- The user is obliged to return it to the entities conducting a collection of used electric and electronic equipment.
- The collection points, including local collection points, shops and municipal entities create a proper system making it possible for the return of the equipment.
- Proper proceeding with used electric and electronic equipment contributes to the avoidance of damaging consequences for the health of the inhabitants and natural environment chick result form the presence of dangerous substances and improper storage and processing of such devices and equipment.
- No foundation and mounting screws included
- Assembly should be carried out by a qualified person.
- Dirtiness that settle down on the diffuser due to normal operation of the fitting shall be cleaned with a damp cloth. Do not use abrasive cleaners.
- The light source used in this luminaire should only be replaced by the manufacturer or his maintenance representative, or a similarly qualified person.
- Provide basic insulation between the LV supply and control wires
- Classification of the insulation maintained between the LV supply and the control wires – basic insulation
LENA LIGHTING S.A. ul. Kornicka 52, 63-000 Sroda WIkp. POLAND
tel. +48 61 28 60 300
e-mail: office@lenalighting.pl
www.lenalighting.pl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>