SATO SK-100WP Wall-Mount Waterproof Digital Thermometer Instruction Manual
- June 16, 2024
- SATO
Table of Contents
SATO SK-100WP Wall-Mount Waterproof Digital Thermometer
Product Information
Specifications
- Name: Standard Temperature Probe
- Model: S100WP-01
- Catalog Number: 8051-00
- Measuring Range: Conforming to JIS C 0920
- Sensing Element: IPX7 rated
- Accuracy: Not specified
- Waterproof Property: Waterproof
- Dimensions: Sensing Stem – 5 x L500 mm, Cord Length – Approximately 1.5 m
- Materials: Sensing Stem – SUS304, Grip – Polybutylene Terephthalate (PBT) resin, Cord – Approximately 1 m
- Weight: Approximately 90 g
- Accessories: Clip for mount
Product Usage Instructions
Connecting Probes
- Match the convex part of the plug and concave part of the socket.
- Insert the plug of the probe into the connector socket.
- Turn the nut clockwise to tightly fasten the connection.
- To remove the probe, turn the nut counterclockwise to loosen and pull the plug straight toward you.
How to Use the Clip
Pass the sensing stem through the holes of the clip and fasten the sensing stem with the clip on the edge of a pot or similar object. If the sensing stem is not locked, expand the plates on both sides.
Cautions
- Use the probe within the specified measuring range to avoid measuring failures or damages.
- Avoid burns by waiting for the stainless-steel stem of the probe and clip to cool down before storing.
- Insert only the sensing stem into the measuring object and never immerse the probe into water except for the sensing part.
- Do not disassemble or modify the probe.
- Avoid applying shocks to the probes as it may cause measuring failures.
Cautions on Handling
- Do not forcibly pull, bend, or bundle the sensor cord to prevent damage.
- Do not immerse the whole unit into water.
- Do not insert the sensing stem into an object by pressing the sensor cord onto the grip with your palm.
Care and Cleaning
Even though the main unit and probe are washable, follow these precautions:
- Do not leave the probe in the water.
- Do not use any chemicals or cleaning solvents for cleaning.
- After cleansing, wipe off any moisture from the probes. Never use any drying machine.
FAQ
Q: Can I use the S100WP-01 Temperature Probe for purposes other than measuring temperature with the SK-100WP Wall-Mount Waterproof Digital Thermometer?
A: No, this product is specifically designed to measure temperature by connecting to the SK-100WP Wall-Mount Waterproof Digital Thermometer and should not be used for other purposes.
Q: What should I do if I encounter measuring failures?
A: Make sure to use the probe within the specified measuring range to avoid measuring failures. If the issue persists, please refer to the troubleshooting section of the user manual or contact customer support for assistance.
Q: Can I disassemble or modify the probe?
A: No, it is not recommended to disassemble or modify the probe. Doing so may void the warranty and potentially damage the product.
Thank you for purchasing the S100WP-01 Temperature probe.
- This product is designed to measure temperature by connecting to a SK-100WP Wall-Mount Waterproof Digital Thermometer. Do not use it for other purposes.
- Read this manual thoroughly before using and keep the manual in a safe place for future reference.
Name of Section
- Sensing stem
- Grip
- Connector
- Nut
- Cord
- Clip
Connecting Probes
- Match the convex part of plug and concave part of socket and insert the plug of the probe into the connector socket.
- Turn the nut clockwise to tightly fasten.
- To remote the probe, turn the nut counterclockwise to loosen and pull the plug straight toward you.
How to use the clip
-
Pass through the sensing stem to the holes of clip.
(Refer to the right figure) -
Fasten the sensing stem with the clip in edge of such a pot.
-
If the sensing stem is not locked, expand the plates on both sides.
Cautions
- Be sure to use the probe within the specified measuring range. Using it out of the range can cause measuring failures or damages.
- Be careful not to get a burn. The stainless-steel stem of the probe and clip become extremely hot when measuring high temperature. Wait until the temperature falls down before storing.
- Make sure to insert only the sensing stem into measuring object. Never immerse the probe into water except the sensing part.
- Never disassemble or modify the probe.
- Do not apply any shocks to the probes. Doing so may cause measuring failures.
Cautions on Handling
Do not forcibly pull, bend or bundle the sensor cord. The sensor cord may get damaged.
- Do not immerse the whole unit into water.
- Do not insert the sensing stem into an object by pressing the sensor cord of the grip with palm.
- Do not bundle or fasten the sensor cord on to the grip.
Care and Cleaning
Even though the main unit and probe are washable, be cautious of the followings:
- Do not leave the probe in the water.
- Do not use any chemicals or cleaning solvents for cleaning.
- After cleansing, wipe off any moisture off the probes. Never use any drying machine.
Specifications
| Name | Standard Temperature Probe |
|---|---|
| Model | S100WP- 01 |
| Cat. No. | 8051-00 |
| Measuring Range | -10.0 to 110.0°C |
| Sensing element | Thermistor |
| Accuracy | ±1°C |
| Waterproof Property | Conforming to JIS C 0920 IPX7 rated |
| Dimensions | Sensing Stem:φ5 x L500 mm Cord Length: About 1.5 m |
| Materials | Sensing Stem: SUS304 |
Grip Polybutylene Terephthalate (PBT) resin Cord approx. 1 m
Weight| approx. 90 g
Accessories| Clip for mount
SATO KEIRYOKI MFG. CO., LTD.
3-4, Kanda-Kajicho, Chiyoda-ku, Tokyo 101-0045 Japan URL:
http://www.sksato.co.jp/english/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>