CENTEK CT-4001 Chest Freezer Instruction Manual

CENTEK CT-4001 Chest Freezer

Dear Customer,

• Thank You for purchasing a CENTEK brand product.
• We guarantee flawless function of this item, provided the guidelines of its operation are observed.
• The chest freezer is a home appliance and is not designed for in-dustrial applications!

PURPOSE OF THE APPLIANCE

For food cooling and/or freezing in a heat-insulated chamber at low temperature.

SECURITY MEASURES
To ensure safety and extend the service life, carefully read this manual and the markings before using the device and follow the following safety instructions. Save these instructions for future reference.
ATTENTION! Non-observance of the following safety instructions can cause accidents.

1. Use only 220-240V, 50Hz power supply systems.
2. Avoid using socket adapters and extension cables for power connection.
3. Do not store volatile, flammable or explosive substances, such as ether, ethanol, gasoline, etc. in the freezer.
4. Do not place heavy objects or spill water on the freezer.
5. If you notice any unusual noise, smell, smoke or any signs of damage during operation, immediately disconnect the appliance from power supply and contact a maintenance service.
6. Avoid damaging the power cable:
7. No power cable replacement is allowed.
8. Do not place heavy objects on the power cable.
9. Keep the power cable at a safe distance from heat sources.
10. Disconnect the appliance from power supply by puling the plug and not the cable.
11. Do not connect too many appliances to the same power supply circuit as this can become the cause of a fire.
12. Wipe the internal surface of the appliance with a soft cloth dampened with warm water.
13. Do not touch the internal walls of the appliance and the foods stored inside with wet hands.
14. It is necessary to maintain air circulation around the appliance during its operation. The minimum distance between the appliance and adjacent walls should be 10 cm.
15. Before connecting the appliance to power supply let it stand upright for 2 hours. This will reduce the probability of cooling system malfunctions caused by improper transportation.
16. The refrigerant used in the appliance is charged into it at the factory using special equipment. Do not allow refrigerant circulation piping to get damaged.
17. The refrigerant escaping from the piping can ignite or harm your health. If the refrigerant circuit is damaged, avoid using open flames or any other sources of ignition and ventilate the room where the freezer is installed for several minutes.
18. The appliance should not be used by physically, sensory or mentally handicapped persons (including children) or by persons without sufficient experience or knowledge, unless such persons are under supervision, or have been instructed on the use of the appliance, by the persons responsible for their safety.
19. Hoarfrost or condensation may appear on the appliance’s walls when the ambient temperature and humidity is very high; wipe them with a dry cloth.
20. In case of power cable damage it should be replaced, to avoid dangerous situations, by the Manufacturer, a service centre or similar skilled personnel.
21. Never turn the appliance on if it shows any signs of damage. If you are in doubt about the functionality of the appliance, contact a maintenance service.
22. Should You decide to transfer the appliance to another person, please pass the present manual over along with it.

TECHNICAL SPECIFICATION

Freezer chamber temperature

in freezing / refrigerator mode

| -12 … -24 °С / 0 … +10 °С
---|---
Operating voltage| 187-264 V ~50 Hz
Rated voltage| 220-240 V ~50 Hz
Current, А| 1,1| 1,2| 1,2| 1,4
Noise level, dB| 40| 40| 40| 41
Power consumption, kW/24 h| 0,582| 0,648| 0,735| 0,630
Power consumption class|

А

|

А

|

А

|

А++

Refrigerant| R600a (46 g)| R600a (50 g)| R600а (55 g)| R600а (56 g)
Net weight, kg| 19,8| 21,8| 25,8| 32,5
Size (w/d/h), mm| 547

446

850

| 600

560

850

| 770

560

850

| 1065

592

844

APPLIANCE DESCRIPTION

1. Lid handle
2. Food storage bin
3. Power cable
4. Grille
5. Control panel
6. Freezer housing
7. Drainage opening

SCOPE OF SUPPLY

• Chest freezer – 1 pc.
• Food storage bin – 1 pc. (CT-4001), 2 pcs. (CT-4002, СТ-4003), 3pcs. (СТ-4005)
• Ice Scraper- 1 pc.
• User Manual – 1 pc.

APPLIANCE INSTALLATION

• The appliance should be transported in an upright position. Do not turn the appliance over. Tilting the appliance by more than 450 is not allowed.
• This appliance should not be built into furniture or operated in niches.
• Do not install the appliance in facilities with very high temperature and humidity.
• A minimum space of 10 cm shall be left between the rear and side walls of the freezer and adjacent walls to provide for proper air circulation.
• Install the appliance in a place protected from direct sunlight and heat sources. Direct sunlight can impact the acrylic coating and heat sources cause increase power consumption. Very low ambient temperatures can also cause improper operation of the appliance.
• After connecting the appliance to power supply, it should operate empty for 2 to 3 hours to cool down sufficiently before placing food in it.
  ATTENTION! The device can be used in an unheated room at a temperature of -15 0C.

OPERATING PROCEDURE

SETTING THE TEMPERATURE-

• The temperature in the device is regulated using the control panel (5), which is located in the lower right corner.-
• The green indicator on the control panel indicates that the device is working.-
• The set temperature is regulated by the thermostat knob.-
• In the “Refrigerator” mode, the device operates at a temperature from 0 to +10 ⁰C.-
• In the “Freezer” mode, the device operates at temperatures from -12 to -24 ⁰C.

ATTENTION!

• Pull the plug from the electric socket to disconnect the freezer from power supply.
• If the appliance has been turned off, You should wait for 3 to 5 minutes before turning it on again. Attempts to turn the appliance on before the abovementioned time elapses may result in damage to the electrical components and the compressor.
• If the freezer is overloaded with food the cooling may not be sufficient.

STORING FOODS

• Operate the freezer with the thermostat control knob set to the maximum position for 2 to 3 hours before placing food into the freezer to obtain the lowest possible temperature in the freezer chamber.
• After that time the thermostat control knob should be set to the medium position.
• It is not recommended to open the lid of the freezer too often or to leave it open for a prolonged time.
• The freezer chamber is designed for long-term storage of frozen foods. Foods can be stored for up to three months.
• Different foods have different storage lives which should not be exceeded. Follow the frozen food storage guidelines when defrosting the freezer chamber.
• Commercially packed frozen food should be stored in accordance with the manufacturer’s instructions provided on the packaging.
• Frozen foods should be placed in the freezer chamber immediatelyafter buying. Follow the manufacturer’s storage instructions provided on the packaging.
• The storage bin is designed for storing foods of irregular shape. In order to reach the other foods in the chamber the bin can be slidaside or lifted off.
• It is not allowed to place warm or hot foods, as well as liquids in glass containers and carbonated beverages and liquids in bottles and cans in the freezer.

DEFROSTING

• For the most efficient operation and lower power consumption it is recommended to defrost the freezer every time the thickness of the ice coat reaches 5 to 10 mm. Choose the time for defrosting when the stock of food in the freezer is not large.
• Do not use hot water to remove the ice as this can damage the plastic parts.
• Do not use sharp objects to remove the ice as this can damage the appliance.
• Do not use chlorine chemicals or acids during the cleaning process.
  • Disconnect the freezer from power supply.
  • Remove all foods from the freezer.
  • Remove the drain plug located at the bottom of the freezer chamber.
  • Place a suitable container for collecting the thawed water under the drain opening.
  • Leave the freezer lid open.
  • Remove the coat of ice when it starts to melt. This will reduce the defrosting time
  • After defrosting wipe the internal surfaces of the freezer with a cloth damped in warm soapy water, then wipe with a dry cloth.
    NOTE: Usually the defrosting takes several hours.
    Pour slightly warm (not hot!) water on the ice so that it melts faster.

CLEANING

• It is recommended to clean the appliance immediately after installation.
• Disconnect the appliance from power supply, remove all foods and the storage bin.
• Wipe the internal surfaces with a cloth moistened with a warmbaking soda solution. Use a ratio of 2 tablespoons of baking soda per 1 l of water.
• Wash the storage bin with a mild detergent.
• Keep the lid seals (rubber gaskets) clean for efficient operation.
• Clean the housing of the freezer with a mild detergent and warmwater.
• Wipe the appliance dry with a soft cloth.
• Clean the condenser heat exchanger using a vacuum cleaner if it is contaminated with dust or dirt.
• It is recommended to clean the freezer during defrosting. This will allow to prevent the development of unpleasant odors and make operation of the appliance more efficient.

SUSPENDING APPLIANCE OPERATION

• Remove the frozen foods from the appliance.
• Disconnect the appliance from power supply.
• Perform appliance cleaning as described above.
• Leave the lid slightly open to prevent the possible development of condensate, mold or unpleasant odors.
• Do not leave children without supervision. The appliance should be kept out of reach of children.
• If you intend to suspend operation of the appliance for less thanthree months, you may leave it connected to power supply.

TRANSPORTATION

• The appliance should be transported in its packaging in a normalupright position by any type of enclosed vehicle. Securely fasten the appliance to prevent shocks and displacement inside the vehicle.
• It is not allowed to tilt the freezer by more than 45° during handling operations, as this can cause damage to the compressor and refrigerant system.

TROUBLESHOOTING

The automatic circuit breaker or safety device has tripped. The thermostat is in the OFF position.
The freezer lid will not close properly| The freezer is not level. The lid gasket is contaminated. Storage bin installed improperly.
Compressor surface becomes hot| This  is  normal.  Do  not touch the compressor.
The freezer turns on and off too often| Room temperature is too high. The freezer is overloaded with food. The lid is being opened too often. The lid is not fully closed. Wrong temperature setting. Lid seals are untight. The freezer is installed too close to a wall. The freezer has been turned off for a prolonged time and requires 2-3 hours to fully cool down.
Crackling   sounds during freezer operation| Metal parts are expanding or contracting like in heating piping. This is normal. The sound appear and disappear as long as the freezer continues operating.
The temperature in the freezer chamber is not low enough| Temperature setting is too high. Set a lower temperature. The temperature will stabilize within a few hours. The lid is being opened too often or for tool long. The lid is not fully closed. Lid seals are untight. A large quantity of hot or warm food has been stored in the freezer. Wait for the freezer to reach the set temperature. The freezer has been turned off for a prolonged time and requires 2-3 hours to fully cool down.
---|---
The temperature in the freezer chamber is too low| Temperature setting is too low. Set a higher temperature. The temperature will stabilize within a few hours.
Bubbling sounds like boiling water during operation| Refrigerant (used for cooling the freezer chamber) is circulating in the system. This is normal.
The freezer is vibrating| Check if the freezer is installed level. Warped or saggy floor. The freezer is installed on a floor that is unstable or moving. Ensure that the floor can support the weight of the freezer. Level out the freezer using wooden or metal shims under the corner supports. The freezer is touching a wall. Reinstall the freezer or move it away from the wall.

DISPOSAL

Upon expiry of its service life the appliance can be disposed of separately from ordinary domestic waste. You can turn it over to a specialized electric and electronic appliance disposal and recycling centre.

CERTIFICATION DATA, GUARANTEE

The service life of this item is 10 years since the date of sale to the end user, provided the item will be used in strict accordance with the present manual and the applicable technical standards. Upon expiry of the service life please contact the nearest authorized service centre for suggestions as to further operation of the appliance. The manufacturing date of the appliance is integrated into the serial number (digits 2 and 3 – year, digits 4 and 5 – month of manufacture). If any questions related to appliance maintenance should arise, or if the appliance has malfunctions, apply to the CENTEK TM Authorized Service Center. The address of the service center can be found on the website https://centek.ru/servis. Service support contacts: Phone: +7 (988) 24-00-178, VK: vk.com/centek_krd. General Service Center: OOO «Larina- Servis», Krasnodar, Phone: +7 (861) 991-05-42.

The product is provided with the Certificate of Conformity:
№ ЕАЭС RU С-CN.ВЕ02.В.04696/22 of 29.12.2022.

MANUFACTURER AND IMPORTER INFORMATION

• Imported to EAEU by: OOO “Larina-Elektroniks”.
• Address: Russia, 350080 Krasnodar, ul. Demusa, 14.
• Phone: +7 (861) 2-600-900.

DEAR CONSUMER!
The guarantee period for all appliances amounts to 24 months from the date of sale to the end consumer. With this Warranty Card the Manufacturer confirms the proper condition of the appliance and undertakes to repair, free of charge, all defects caused by the Man-ufacturer’s default.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>