CENTEK CT-2535 Vacuum Cleaner Instruction Manual

CENTEK CT-2535 Vacuum Cleaner

Specifications:

• Vacuum Cleaner Model: CT-2535
• Power Supply: 220-240V ~50/60Hz
• Power Consumption: 1200W – 2000W
• Dust Capacity: 350ml

Product Usage Instructions

Initial Setup
Unbox the vacuum cleaner and ensure all parts are included as per the manual.

Power On
Connect the vacuum cleaner to a power source with the appropriate voltage.

Operating Modes
Choose from different operating modes as per your cleaning requirements.

Dear Customer!
Prior to operating the appliance, please carefully read the present manual which contains important information regarding its proper and safe operation. Take care not to lose the present manual. The manufacturer will not be responsible for any damage resulting from improper use of the appliance or from non-observance of the instructions and provisions of the present manual, as well as from attempts by unskilled persons at repairing the appliance. Should You decide to transfer the appliance to another person, please pass the present manual over along with it.

PURPOSE OF THE DEVICE

For cleaning dust and dirt from hard and soft surfaces (hard floor, carpet, etc.).
The vacuum cleaner is a home appliance and is not designed for industrial applications.

 SAFETY PRECAUTIONS

The following requirements should be strictly observed in order to avoid situations hazardous for human life and health, as well as premature failures of the appliance:

1. Carefully read the present manual prior to operating the appliance. Retain the present manual, cash voucher and appliance packaging.
2. Ensure that the power supply grid voltage corresponds to the one indicated on the data plate of the appliance before operating it.
3. Connect the appliance only to power grid sockets equipped with earthing contacts, use only two-pole extension cables with 10A rating and an earthing conductor.
4. Always pull the plug from the power socket after use and prior to any cleaning and maintenance operations.
5. Pull the plug from the power socket before opening the unit’s lid.
6. Do not leave the appliance near heat sources.
7. Do not use ethyl alcohol and other solvents for cleaning the appliance.
8. Do not use the appliance for collecting liquids.
9. Only the use of original spare parts is allowed. Do not use accessories which are not included in the scope of supply.
10. Do not turn the appliance on if it is damaged or malfunctioning.
11. Do not operate the appliance if its power cable or plug is damaged, if doesn’t run smoothly or has been dropped.
12. Do not attempt to repair the appliance yourselves.
13. If the power cable is damaged it should be replaced by the Manufacturer, a service facility or other skilled personnel.
14. Do not submerge the appliance and its power cord in water or any other liquids.
15. Ensure that the power cable does not touch sharp edges and hot surfaces.
16. The appliance should not be used by physically, sensory or mentally handicapped persons (including children) or by persons without sufficient experience or knowledge, unless such persons are under supervision, or have been instructed on the use of the appliance, by the persons responsible for their safety. Take precautions not to let children play with the appliance.
17. Special instructions for transportation (shipment) and sale: none.

APPLIANCE DESCRIPTION

1. Telescopic tube
2. Handle
3. Flexible hose
4. Two-position brush
5. Coupling
6. Dust container
7. ON/OFF button 22
8. Vertical pipe parking
9. Cord rewind button
10. Carrying handle

 SCOPE OF SUPPLY

• Vacuum cleaner with a container for dust, complete – 1 pc.
• Flexible hose – 1 pc.
• Telescopic tube – 1 pc.
• Two-position brush – 1 pc.
• Crevice nozzle – 1 pc.
• Small brush – 1 pc.
• Operation manual – 1 pc.
• HEPA filter – 2 pcs.
• Foam filter – 1 pc.

 ORDER OF WORK

ASSEMBLING THE VACUUM CLEANER
HOSE CONNECTION
Insert the pipe of the vacuum cleaner into the coupling, attach a combination brush or attachment to the pipe.

INSTALLATION OF EXTENSION PIPE AND NOZZLES

USING NOZZLES
TWO-POSITION CARPET AND FLOOR NOZZLE

1. Pos. 1: Brushes extended – for hard floors.
2. Pos. 2: Brushes retracted – for cleaning carpets.

CARE OF THE APPLIANCE

Your vacuum cleaner is equipped with 3 filters:

1. Inlet foam filter.
2. Input high efficiency HEPA filter.
3. Output high efficiency HEPA filter.
   Each of these filters requires maintenance and timely replacement.

CLEANING THE HARD SPONGE FILTER
The filters should be cleaned after each use of the vacuum cleaner. Rinse the filter to remove dust. Then dry thoroughly. With an average intensity of use of the vacuum cleaner (2-3 times a week for 15-20 minutes), replace the filters every 6 months.

CLEANING THE HEPA FILTER
This filter must also be cleaned after each use of the vacuum cleaner. The filter must be shaken out of dust. In addition, approximately once a month with an average intensity of use, it must be blown out with a powerful jet of air. It is forbidden to wash HEPA filters! This can damage the motor.

DUST CLEANING

1. Switch off the device and disconnect the pipe.
2. Open the lid at the bottom of the case and remove the dust container.
3. Empty the dust container.

Replacement filter kits can be purchased separately. we strongly recommend observing the following maintenance instructions: this will allow to maintain the highest suction power and quality performance of your new CENTEK TM vacuum cleaner. this is also the prerequisite of free guarantee maintenance. do not wash filters in a washing machine and do not dry them with a hair dryer.
please clean the dust collector and the filters every time after cleaning your home. not doing so may result in power loss and appliance failure.

SPECIFICATIONS

• Rated voltage: 220-240 V ~50/60 Hz
• Nominal power rating: 1200 W
• Maximum power rating: 2000 W
• Suction power capacity: 350 W

DISPOSAL

Upon expiry of its service life the appliance can be disposed of separately from ordinary domestic waste. You can turn it over to a specialized electric and electronic appliance disposal and recycling centre.

CERTIFICATION DATA, GUARANTEE

The service life of this item is 5 years since the date of sale to the end user, provided the item will be used in strict accordance with the present manual and the applicable technical standards. Upon expiry of the service life please contact the nearest authorized service centre for suggestions as to further operation of the appliance. The manufacturing date of the appliance is integrated into the serial number (digits 2 and 3 – year, digits 4 and 5 – month of manufacture). Guarantee and post-guarantee maintenance is provided by the General Service Center OOO «Larina-Servis» (Russia, Krasnodar), phone: +7 (861) 991-05-42. The address of the facility authorized with receiving buyer claims, maintenance and repairs is shown on the website https://centek.ru/servis otherwise refer to the store or other legal entity, where you have purchased this appliances. The product is provided with the Certificate of Conformity: № ЕАЭС RU С-CN.ВЕ02.В.02216/20 from 28.04.2020 y.

MANUFACTURER AND IMPORTER INFORMATION

Imported to EAEU by: Individualniy Predprinimatel Asrumyan Karo Shurikovich. Address: Russia, 350912 Krasnodar, ul. Atamana Lysenko, 23, pgt. Pashkovskiy, phone: +7 (861) 2 600 900.

DEAR VALUED CONSUMER!
The guarantee period for all appliances amounts to 12 months since the date of sale to the end consumer. With this Warranty Card the Manufacturer confirms the proper condition of the appliance and undertakes to repair, free of charge, all defects caused by the Manufacturer’s default.

GUARANTEE MAINTENANCE TERMS

1. The guarantee shall be valid if the following documentation conditions are observed:

   • The original Warranty Card shall be filled out correctly and clearly, indicating the of appliance model, serial number and sale date, the stamp of the seller company and signature of its representative shall be available, as well as the stamps on each coupon and the buyer’s signature in the Warranty Card.
     The Manufacturer reserves the right to reject guarantee maintenance if the buyer fails to provide the abovementioned documents or if the information contained therein is incomplete, illegible or ambiguous.

2. The guarantee shall be valid if the following operation conditions are observed:

   • the appliance is used in strict accordance with the present manual;
   • the safety rules and requirements are observed.

3.  The guarantee does not apply to regular maintenance, cleaning, installation and setup of the appliance at the owner’s location.

4. The guarantee does not apply in the following cases:

   • mechanical damage;
   • normal wear of the appliance;
   • non-observance of operation requirements or erroneous actions on the part of the user;
   • improper installation or transportation;
   • natural disasters (lightning, fire, flood, etc.), as well as any other causes beyond the Manufacturer’s or Seller’s control;
   • ingress of foreign objects, liquids or insects into the inside of the appliance;
   • repairs or modifications to the appliance by unauthorized persons;
   • use of the appliance for commercial purposes (loads exceeding normal domestic application), connection of the appliance to utility and telecommunication networks incompliant with national technical standards;
   • failure of the following accessories, if replacement of these is allowed by design and does not involve disassembly of the appliance:
   • remote control units, rechargeable batteries, replaceable batteries (power cells), external power supply units and chargers;
   • consumables and accessories (packaging, covers, slings, carry bags, mesh screens, blades, flasks, plates, supports, grilles, spits, hoses, tubes, brushes, nozzles, dust collectors, filters, smell absorbers);
   • for battery-powered appliances – operation with inappropriate or depleted batteries;
   • for rechargeable battery-powered appliances – any damage caused by improper battery charging and recharging.

5. The present guarantee is provided by the Manufacturer in addition to the consumer rights determined by the applicable legislation and does not limit these rights in any way.

6. The Manufacturer shall not be made liable for possible damage, directly or indirectly inflicted by CENTEK brand products on people, domestic animals, the consumer’s or third persons’ property if such damage is inflicted as the result of non-observance of appliance installation and operation requirements, deliberate or negligent actions (omission) by the consumer or third persons, as well as of force majeure circumstances.

7. Service centers will only accept appliances in a clean state (there should be no food residues, dust and other contamination on the appliance).

The Manufacturer reserves the right to change the design and specifications of the appliance without prior notice.

References

• Главная страница - Официальный сайт Centek
• Сервис - Официальный сайт Centek

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>