FAR TOOLS SBG150C Professional Bench Grinder Instruction Manual
- July 4, 2024
- FAR TOOLS
Table of Contents
- FAR TOOLS SBG150C Professional Bench Grinder
- Product Information
- Product Usage Instructions
- Description and location of machine parts
- Contents of box
- Assembling the machine
- Functions of the machine
- Cleaning and maintenance and advice
- GARANTIE – WARRANTY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
FAR TOOLS SBG150C Professional Bench Grinder
Product Information
Specifications
- Model: SBG 150C
- Type: Bench Grinder
- Brand: Professional Machine
Product Usage Instructions
Description and Location of Machine Parts (FIG. A & B)
The machine consists of various parts including a grinding wheel, sanding
bench, base, spark shield, tool holder, switch, lighting, and drills
sharpener.
Assembling the Machine (FIG. C & D)
Follow the instructions provided in FIG. C and D to assemble the machine
properly, including tool holder assembly, spark shield assembly, and fixing of
the machine.
Functions of the Machine (FIG. E)
The machine is designed for grinding, sanding, sharpening drills, and other
related tasks.
Settings of the Machine (FIG. F)
Adjust the tool holder and spark shield as per the instructions in FIG. F
for optimal performance.
FAQ
-
How often should I check the condition of the grinding wheels?
It is recommended to regularly inspect the condition of the grinding wheels to ensure safe and efficient operation. -
Can I use accessories not provided with the machine?
For optimal performance and safety, it is advised to use only accessories recommended for use with the machine. -
What should I do if the motor feels strained during operation?
If you feel that the motor is under excessive strain, reduce pressure on the grinding wheels, brushes, and other accessories to prevent unnecessary stress on the motor.
Bench grinder (Original manual translation)
Description and location of machine parts
FIG. A & B
- Grinding-wheel
- –
- –
- –
- Sanding bench
- Base
- Spark shield
- Tool holder
- –
- Switch
- –
- Lighting
- Drills sharpener
Contents of box
FIG. C
Assembling the machine
FIG. D
- –
- Tool holder assembly
- Spark shield assembly
- –
- Fixing of the machine
Functions of the machine
FIG. E
Approach the grinding-wheel tool slowly, sharpen the tool by exerting intermittent pressure and wet it regularly with the water. Grinding-wheel wear must be on the entire width therefore shift the workpiece sideways.
- Roughing : To rough, deburr or grind, use a coarse grain (ex A40) and dry grinding-wheel only, finish with a finer grain
- Sanding : To sand wood and wood products, plastic, metals, etc., use the sanding bench. The finer the grain the better the finish.
- Drilling works: to sharpen drills of different diameters, replace the round cover with the sharpening cylinder.
Settings of the machine
FIG. F
- ooolholder and spark shield adjustment.
Replacing consumables
FIG. G
- Grinding-wheel
- –
- –
- Sanding bench
Cleaning and maintenance and advice
- The use of suitable accessories in good condition will ensure the machine operates optimally Check the condition of your grinding-wheels regularly.
- Use a grinding-wheel dresser regularly to rectify the grinding-wheel surface.
- Always keep the equipment clean.
- Always check grinding-wheel condition (including new grinding-wheels).
- Do not exert too much pressure on the grinding-wheels, brushes and other accessories in order not to overtax the motor needlessly.
| Nominal frequency and power: Tahsis gerilimi ve frekansı:
| 230 V ~ 50 Hz
---|---|---
| Nominal power: Tahsis
| SERVICE TEMPORAIRE S6| 350 W (S6:10%)
---|---|---|---
| Nominal power: Tahsis
| SERVICE CONTINU S1| 250 W (S1)
---|---|---|---
| No-load speed: Boşalma hızı:
| 2980 min -1
| Diameter of wheel and bore : Disk ve|
ø 150 x 20 x ø 12,7 mm
---|---|---
| Acoustic pressure level :
| :| | :| 82,4 dB (A)
---|---|---|---|---|---
| Acoustic power level :
Akustik| 95,4 dB (A)
---|---|---
| Read the instructions before use :| X
---|---|---
| Wear protective eyewear :| X
---|---|---
| Wear a dust mask :
Toza| X
---|---|---
| Wear hearing protective equipment: İşitsel
| X
---|---|---
| Use rubber gloves :
Eldiven takın :| X
---|---|---
| Recyclable, subject to recycling| X
---|---|---
| Danger :| | | | X
---|---|---|---|---|---
SBG 150C
DECLARATION CONFORMITY
Bench grinder
code
FARTOOLS / 110245 / SGB 150C / NBG150 /50V
Est conforme et satisfait aux directives et normes CE,
- 2014/30/EU 2006/42/EC 2011/65/EU 2015/863/EU
- EN62841-1:2015
- EN62841-3-4:2016/A1:2020
- AfPS GS 2019:01 PAK
- EN IEC 55014-1:2021
- EN IEC 55014-2:2021
- EN IEC 61000-3-2:2019/A1:2021
- EN 61000-3-3:2013/A2:2021
- Christophe HUREL,
- Président Directeur Général
- 13/03/2024
- Fait à St. Pierre-des-Corps
GARANTIE – WARRANTY
This tool is guaranteed, in writing, against any defect in manufacture or parts from the date of sale, upon simple presentation of the sales slip. The guarantee is limited to the replacement of faulty parts. This guarantee is not applicable in the event of usage which is not conform with the intended usage of the apparatus, nor in the event of damage caused by unauthorised servicing or negligence on behalf of the purchaser. This guarantee does not apply to any damage caused by the failure of this tool.
AFTER SALE SERVICE
FARGROUP EUROPE – 192, Avenue Yves Farge – 37700 St. Pierre-des-Corps – FRANCE
fargroup@fargroup.net
FAR GROUP EUROPE
192, Avenue Yves Farge 37700 St. Pierre-des-Corps FRANCE
fartools.com 110245-3-Manual-J.indd 33110245-3-Manual-J.indd 33
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>