CENTEK CT-1975 Washing Machine Instruction Manual

CENTEK CT-1975 Washing Machine

Dear Customer,
Thank You for purchasing a CENTEK brand product. We guarantee flawless function of this item, provided the guidelines of its operation are observed.

PURPOSE OF THE APPLIANCE
The product is intended only for home use and for textiles in household amounts suitable for machine washing. This appliance is for indoor use only and not intended for built in use. Only use according to these instructions. The appliance is not intended for commercial use. Any other use is considered as improper use. The producer is not responsible for any damage or injuries that may result of it. This appliance is designed for use in domestic and similar applications, in particular:

• in personnel kitchen zones at stores, offices and industrial facilities;
• at agricultural farms;
• by clients at hotels, motels and other residential facilities;
• in private boarding houses.

SAFETY PRECAUTIONS
Please read the following safety information thoroughly and follow it strictly to minimize the risk of fire or explosion, electric shock and to prevent property damage, personal injury or loss of life. Failing to follow these instructions shall void any warranty.
ATTENTION
ELECTRIC SHOCK HAZARD!

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• If the machine is damaged, it must not be operated unless repaired by the manufacturer, its service agent or similarly qualified persons.

1. The appliance should not be used by physically, sensory or mentally handicapped persons (including children) or by persons without sufficientexperience or knowledge, unless such persons are under supervision, or have been instructed on the use of the appliance, by the persons responsible for their safety. Take precautions not to let children play with the appliance.
   Remark according to EU requirements:

   • The appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
   • Children should be supervised that they do not play with the appliance.
   • Children 3 years and under shall be kept away from the appliance or continuously supervised.

2. Animals and children may climb into the machine. Check the machine before every operation.

3. Do not climb or sit on the appliance.

INSTALLATION LOCATION AND SURROUNDING

1. All washing and additional substances are to be kept in a safe place out of the reach of children.
2. Do not install the machine on a carpet floor. The obstruction of the openings by a carpet can damage the machine.
3. Keep the appliance clear from heating sources and direct sunlight to avoid plastic and rubber parts to corrode.
4. Do not use the appliance in humid environments or rooms containing explosive or caustic gas. In case of water leakage or water splashes let the appliance dry in the open air.
5. The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the washing machine.
6. Do not operate the machine in rooms with a temperature of below 5 °C. This can cause damages to parts of it. If it is unavoidable, make sure to drain the water completely from the appliance after every use to avoid damages caused by frost.
7. Never use flammable sprays or substances in the immediate proximity of the appliance.

INSTALLATION

1. Remove all packaging material and transport bolts before using the appliance. Otherwise, serious damage may result.
2. This appliance is equipped with a single inlet valve and can be connected to the cold water supply only.
3. Mains plug must be accessible after installation.
4. Before washing clothes for the first time, the product shall be operated once throughout all the procedures without any clothes inside.
5. Before using the washing machine, the product shall be calibrated.
6. Do not put any excessively heavy objects on the appliance, like water containers or heating devices.
7. The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
8. Max. Inlet water pressure 1 MPa. Min. inlet water pressure 0.03 MPa.

ELECTRICAL CONNECTION

1. Make sure the supply cable is not trapped by the machine, it can get damaged.
2. Connect the product to a grounded outlet protected by a fuse complying with the values in the «Technical specifications» table. The grounding installation has to be made by a qualified electrician. Ensure that the machine is installed in accordance with the local regulations.
3. Water and electrical connections must be carried out by a qualified technician in accordance with the manufacturer‘s instructions and local safety regulations.

ATTENTION

• Don´t use multiple plugs or extension cords.
• The appliance must not have an external switching device such as a timer or connected to a circuit that is regularly switched on and off.
• Do not pull the plug out of the mains outlet if there is flammable gas around.
• Never pull out power plug with wet hands.
• Always pull at the plug, not at the cable.
• Always unplug the appliance if it is not being used.

WATER CONNECTIONS

1. Check the connections of the water inlet tubes, the water tap and the outlet hose for possible problems due to changes of water pressure. If the connections loosen or leak close the water tap and get it repaired. Do not use the appliance before the pipes and hoses are installed properly by qualified persons.
2. Glass door may become very hot during the operation. Keep children and pets far away from the machine while it is operating.
3. The water inlet and outlet hoses have to be safely installed and remain undamaged. Otherwise, water leakage can occur.
4. Do not remove the drain pump filter while there is still water in the appliance. Big quantities of water can leak out, and there is a risk of scalding due to hot water.

OPERATION AND MAINTENANCE

1. Never use any flammable, explosive or toxic solvents. Do not use gasoline and alcohol etc. as detergents. Only select detergents that are suitable for machine washing.
2. Make sure that all pockets are emptied. Sharp and rigid items such as coins, brooches, nails, screws, stones etc. may cause serious damages to this machine.
3. Remove all objects from pockets such as lighters and matches before use the appliance.
4. Thoroughly rinse items that have been washed by hand.
5. Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, wax and wax removers should be washed in hot with an extra amount of detergent before being dried in the appliance.
6. Items containing foam rubber (latex foam), shower caps, water proof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the machine
7. Fabric softeners or similar products should be used as recommended in their instructions.
8. Never try to open the door forcefully. The door will unlock shortly after the end of a cycle.
9. Please do not close the door with excessive force. If it is found difficult to close the door, please check if the clothes are properly inserted and distributed.
10. Always unplug the appliance and close the water tap before cleaning and maintenance and after each use.
11. Never pour water over the appliance for cleaning purpose. Risk of electric shock!
12. Repairs shall only be carried out by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. The producer will not be responsible for damages caused by the intervention of not authorized persons.

TRANSPORT

1. Before Transport:
   • Bolts shall be reinstalled to the machine by a specialized person
   • Accumulated water shall be drained out of the machine
2. This appliance is heavy. Transport with care. Never hold any protruding part of the machine when lifting. The machine door cannot be used as a handle.

REQUIREMENTS FOR INSTALLATION, STORAGE, TRANSPORTATION (SHIPMENT), SALE AND DISPOSAL

1. The appliance does not require any permanent installation or securing.
2. The manufacturer or consumer should store the appliance in suitable packaging in heated facilities at a temperature of 5 °С to 40 °С and a maximum relative humidity of 80 %. The storage facilities should not contain aggressive, corrosion-provoking environments (acidic or alkaline vapors).
3. The following requirements should be observed to ensure proper transportation of the appliance:
   • remove all internal accessories from the appliance, if any are installed, and pack them separately;
   • ensure that the appliance is properly packed to retain its functionality and  exterior look (bulky appliances should be wrapped into plain or bubble polyethylene film with corrugated cardboard inserts in sensitive places);
   • securely fasten the appliance with straps to prevent its displacement within the vehicle during transportation;
   • transport the appliance only in an enclosed vehicle to eliminate any impact from the outdoor environment;
   • ensure that the appliance is handled with utmost care during loading and unloading to keep the packaging undamaged.
4. The appliance requires careful handling to keep it from dust, dirt, mechanical impact, moisture, fire, etc.
5. The appliance should be sold and purchased in compliance with the local legislation.
6. Do not discard the appliance together with other domestic waste upon expiry of its service life. Instead, it should be turned over for disposal to a specialized recycling facility for electric and electronic equipment in compliance with the federal or local legislation. By ensuring proper disposal of the appliance You contribute to the saving of natural resources and the prevention of damage to the environment and human health, which may occur in case of improper handling. Detailed information about disposal facilities suitable for your appliance located in Your area is available from the local municipal authorities or at a domestic waste disposal company.
7. If any malfunction of the appliance should occur, please immediately contact an authorized service center or turn the appliance over for disposal.

Should You decide to transfer the appliance to another person, please pass the present manual over along with it.

APPLIANCE DESCRIPTION

1. Water supply tube
2. Washing agent drawer
3. Door
4. Top cover
5. Power cable
6. Control panel
7. Drum
8. Drain hose
9. Filter

SCOPE OF SUPPLY

• Washing machine – 1 pc.
• Plugs – 4 pcs.
• Water supply hose – 1 pc.
• User Manual – 1 pc.
• Wrench – 1 pc

OPERATING THE WASHING MACHINE INSTALLATION LOCATION

ATTENTION

• Stability is essential for preventing spontaneous displacement of the appliance during operation.
• Ensure that the appliance is leveled out. Allowable floor gradient – 1 °.
• Ensure that the appliance is not standing on its power cable and not jamming it.
• The minimum clearance between the appliance and the walls or adjacent permanently fixed objects shall be 20 mm at the sides and 100 mm at the back.

1. The washing machine should be installed on a dry, level and hard surface.
2. Keep the appliance away from direct sunlight.
3. The washing machine should be installed in a well-ventilated room.
4. The temperature in the room should not drop below 5 °С.
5. Install the washing machine away from heat sources, such as coal or gas ovens, fireplaces or heaters. If this is not possible, install suitable heat insulation between the appliances, lined with aluminum foil facing the heat source. The heat shield should cover the entire surface area of the washing machine. The washing machine should not be heated with by the heat sources.

UNPACKING THE WASHING MACHINE

ATTENTION : Packaging materials (e.g. film or plastic foam) can present a hazard for children.
SISK OF SUFFOCATION! Store the packaging materials out of reach of children. While unpacking the appliance ensure that it has not been damaged during transportation. If any damage is revealed, do not connect the machine

• immediately contact the Manufacturer (vendor). Check the scope of supply.

1. Remove the cardboard box and foam plastic packaging.
2. Lift the washing machine and remove the packaging from its base. Ensure that the small foam plastic triangle is removed from the machine base. If not, lay the appliance on a side, then manually remove the foam plastic triangle from the bottom of the appliance.
3. Remove the tape binding the power cable to the drain hose.
4. Remove the water intake tube from the drum.

ATTENTION
Remove the four transport bolts from the back side of the machine before operating it.

1. Unscrew the 4 transport bolt with a suitable wrench.
2. Extract the bolts, including the rubber washers, from the machine body, keep them in case of future transportation.
3. Close the bolt holes with the supplied plugs.
   NOTE : Failure to remove the transport bolts will result in strong vibration and noise, spontaneous displacement of the machine and can cause irreparable damage to the machine.

LEVELING THE WASHING MACHINE Level out the washing machine using the threaded feet so that the deviation from the horizontal plane does not exceed 1 °. Loosen the lock nut with a wrench. Turn the foot until it is firmly pressed against the floor. Adjust all 4 feet as described in Item 2 so that the machine stands level and does not wobble. Use a construction water level to check the leveling of the machine.

STABILITY CHECK
The washing machine should not rock or wobble when pressed on the corners of the top cover (check both diagonal directions). If the machine wobbles readjust the feet. Secure the feet after adjustment by tightening the lock nuts on all 4 feet.

ATTENTION
Firmly tighten the locknuts of all four feet against the machine body after adjustment.

NOTE:

• A proper placement and leveling of the machine guarantees its long-term, stable and reliable operation.
• The washing machine should be installed absolutely level and stably.
• The machine should not rock or wobble under load.
• Avoid contact of the machine feet with moisture. Otherwise vibration or noise may occur.

ATTENTION
If the washing machine is installed on a carpeted floor, make sure that its base is raised above the carpet pile. Otherwise ventilation may be hindered or impossible.

CONNECTING TO WATER SUPPLY

ATTENTION
Connection of the appliance to water supply should only be performed by a skilled technician.

NOTE:

• The water supply pressure should be within the range of 0,3 to 1 mPa (0,3-10 kg/cm2). If the pressure exceeds 1 mPa a pressure-reducing device should be installed upstream of it.
• Do not apply excessive force when screwing the water supply tube onto the tap.
• Regularly check condition of the tube, replace if necessary.
• Use only brand new water supply tubes for washing machines, do not use old tubes e.g. used with the pervious machine.

ATTENTION
Connect the washing machine only to the cold water supply piping. The internal components of the machine are not made of materials suitable for hot water. Besides, the supply of hot water into the machine will disturb the temperature modes during washing and cause damage to your laundry. Hot water may contain anti corrosion additives which are detrimental to the internal parts of the washing machine.

CONNECTING THE INLET TUBES AND VALVES

1. Check the availability of the rubber gaskets on both sides of the flexible tube. If necessary, insert the rubber gaskets into the threaded fittings of each hose end for sealing the connections.
2. Usually, on the water supply piping side, the tube is connected to a three-way valve attached to the tube to provide water cutoff from the machine. Screw the ring nut of the tube onto the valve by hand as firmly as possible, then tighten by a quarter or half turn with a suitable tool. Do not overtighten the nut, as this may rupture the gasket and cause a leak.
3. After connecting open the valve to flush any contaminants (dirt, dust, sand) from the tube that may have gotten inside during installation. Collect the water in a bucket or basin.
4. Screw the ring nut of the tube onto the washing machine inlet, then tighten it the same way as on the water supply valve.
   NOTE : Every time you open the water supply valve after connecting it to the machine, do it slowly to prevent surge (hydraulic shock) and damage to the internal component of the machine. Close the water supply valve every time after using the machine to prevent leaks and spillage.

ATTENTION
Do not try to extend the water supply tube yourselves! If the water supply tap is located too far away from the machine, buy a longer tube.

NOTE : The washing machine can be connected to water supply via an ordinary domestic tap. In this case all the same requirements should be observed, besides, to avoid spillage, please ensure that the connection between the tap and the hose is tight and secure and the tube will not come off the tap. However, this connection method is not recommended and can only be applied if a fixed connection to water supply is not possible.

DRAIN HOSE CONNECTION

ATTENTION: Connection of the appliance to the drain should only be performed by a skilled technician.

1. One end of the hose is fixed to the appliance. Do not pull it out or force it in.
2. The other (free) end of the hose can be routed into a bathtub, sink, or connected to the drain (sewage) piping.
3. If the free end of the hose is routed into a bathtub or sink, it should be firmly secured (e.g. with a special bathtub clamp). A loose hose can easily fall off because of the water pressure and cause spillage.
4. When connecting the hose to the drain pipe, make sure it is not inserted too deep so as not to obstruct the sewage flow. If the hose is too long – cut it down to size.
5. In any case please avoid the siphon effect when connecting the machine to the drain; otherwise the water will not stop running. For this purpose a part of the hose should always be raised at least 60 cm above the floor. Besides, the free end of the drain hose should not be submerged in water (therefore please avoid connecting the hose to the sewage pipes with a constant water flow).

NOTE : If the free end of the hose is routed into a sink, use a special holding clamp (bracket) as in the case with a bathtub; secure the clamp with a chain or rope.

CONNECTING TO POWER SUPPLY

1. The washing machine should be connected to a properly installed grounded electric socket protected by an automatic circuit breaker of 16A rating. For added safety it is recommended to connect the washing machine to a dedicated lead (socket) assigned in the switchboard and used exclusively to connect the washing machine, protected by a dedicated differential current circuit breaker or a combined automatic circuit breaker and ground fault circuit breaker (GFCI). The manufacturer will not accept liability for any damage if the machine is connected to a power supply circuit without a functioning earthing connection installed in accordance with local regulations.
2. The electric circuit to which the machine is connected should be located in a easily visible and accessible place, within 1 m to the left or right of the appliance. Please prevent situations when the power cable can be jammed, tugged at or trampled upon.
3. Never use extension cables or cluster type power sockets to connect the appliance. This is critical to avoid loose contacts or contacts with insufficient area and thus to prevent fires. Never connect the appliance via an external timer.
4. If the power cable is damaged it shall only be repaired by a properly qualified technician at a service center

OPERATING THE WASHING MACHINE

ATTENTION: Before doing your laundry ensure that the washing machine is installed properly in accordance with our instructions. The appliance has undergone quality acceptance tests at the factory, therefore it may contain water and show minor traces of test operation.

ATTENTION: In order to eliminate any foreign smells and clean the washing machine before first use, we recommend running the “Drum Cleaning” at 85 °С without clothes and detergents. Do not worry if the smell has not gone completely. There may be the smell emitted by plastic and rubber components that have become very hot during operation.

In this case either run another washing cycle without clothes at a high temperature, or wait for the smell to disappear after the first two or three washing cycles.

ATTENTION
After every 2-3 washes it is necessary to clean the drum. To do this, use the special “Drum Cleaning” program. Regular cleaning of the drum in the washing machine will avoid breakdowns and significantly increase the service life of the equipment.

BEFORE WASHING

1. Connect the machine to power supply.
2. Open the valve to which the water supply tube is connected.
3. Load the clothes into the machine.
4. Firmly close the door.
5. Add the detergent

WASHING

1. Select the desired washing program with the selector dial.
2. You can change the washing temperature and drying speed if desired. Please pay attention to the care instructions tags on the clothes before loading them into the machine.
3. Select the auxiliary modes and/or functions.
4. Press the «Start/Pause» to start the washing program.

AFTER WASHING
At the end of the washing cycle the word «End» will appear on the display. Wait for the door to unlock (the lock indicator will go out), open the door and remove the clothes. Turn the machine off. Close the water supply valve.
NOTE : We recommend leaving the washing machine door open to allow the moisture inside to evaporate.

PREPARING YOUR LAUNDRY

Sort your clothes to achieve optimal washing results, then prepare them in accordance with the symbols on the washing instruction labels.

SORTING (Fig. 2)

• For more efficient washing sort your laundry in accordance with the care instructions, fabric type and recommended washing temperature; wash your laundry at the proper drum rotation speed.

• Different fabrics should be washed at different temperatures and drum rotation speeds.

• By all means sort dark clothes out from light-colored and white clothes. Wash them separately, as dyes and pile can migrate and discolor light-colored and white clothes. If possible, do not wash heavily contaminated clothes together with cleaner clothes.
  NOTE:

• Degree of contamination (high, normal, low): sort the clothes according to contamination degree. Use longer and more intensive washing for medium and highly contaminated clothes. Lightly contaminated clothes may be washed at a lower temperature to save power.

• Color (white, light-colored fabrics, dark fabrics): Separate white clothes from colored clothes. First wash newer dark and colored clothes separately from the rest.

• Pile (pile fabrics, clothes that gather pile): wash pile fabric clothes and clothes that gather pile from other clothes separately from the rest.

• Clothes with metal components (e.g. bone bras, belt buckles, metal buttons) can damage the washing machine. Remove metal components before washing or place the laundry into a mesh bag or pillow case. Besides, items like snickers should be washed in a mesh bag to protect the items themselves from wear. A mesh bag is also handy for washing small items (Fig. 5).

CHECKING THE GARMENT CARE LABELS (Fig. 1)
The symbols used to indicate fabric composition and washing instructions.

NOTE : The lines under the symbols indicate the fabric type and the maximum allowable mechanical stress.

CHECKING THE CLOTHES BEFORE LOADING

• Wash large and small items together. Load large items first.
• Large items should not take up more than half of the batch. Do not wash single items to avoid drum imbalance. Always add one or two more items.
• Check the pockets and make sure they are empty. Objects like nails, pins, matches, pens, coins or keys can damage both the machine and the clothes (Fig. 3).
• Zip up the zippers, hook the hooks, tie the laces so that they do not get entangled with other clothes (Fig. 4).
• Apply some detergent dissolved in a small amount of water to stains before placing the garment into the machine, so that the stains come off easier.
• Spread out curtains before putting them into the washing machine. Remove any attachment brackets before washing.
• Zip up the zippers, sew on loose buttons, mend holes and stitch up ruptures.
• Do not wash white and colored laundry together. New colored clothes can stain other clothes. Wash colored items separately.
• Use only such detergents, color fresheners and tinctures as are suitable for machine washing. By all means observe the instructions provided on the packaging.
• Turn trousers and fine laundry inside out before washing (Fig. 6).
• Shake items heavy soiled by flour, lime, milk powder, etc. before putting them into the washing machine. Such contaminants can accumulate inside the washing machine and eventually cause damage.
• Check the folds of the door seal and remove any small objects stuck in it.

ATTENTION

Ensure that no clothing items are jammed between the door and door seal, otherwise they can be damaged during washing. Remove any foreign objects stuck in the door seal to prevent damage to the seal and the laundry.

CLOTHES NOT SUITABLE FOR MACHINE WASHING

• Ties, vests, etc. that can shrink after machine washing.
• Garments with folds and embossing that can be deformed during machine washing.
• Garments made completely or partially of fur.
• Garments with decorations.
• Avoid washing items with missing manufacturer’s washing instruction labels.
• Never wash clothes contaminated by gasoline, kerosene, diesel fuel, paints, solvents and alcohols.
• Items made of waterproof materials are not machine washable. Trying to wash such items can cause machine overfilling, spillage and excessive vibrations during rinsing, as well as damage to the items themselves (such as skiing suits, raincoats, umbrellas, car seat covers, tents, sleeping bags, etc.). Water trapped inside the waterproof items cannot be fully drained and may imbalance the drum, causing vibration and displacement of the machine.

ITEMS THAT CAN EASILY MAT TOGETHER
Items that can easily mat together (e.g. downy knits), should be turned inside out before washing. Such items should better be washed separately, as they may damage other clothes and become damaged by them. For the same reason it is preferable to wash black and colored cotton garments separately.

USING THE DETERGENT TRAY

1. is used for detergent powder.

2. for liquid detergent.
   NOTE : never use powder and liquid detergent together (only one or another).

3. for laundry conditioner/rinsing agent.
   NOTE : Always add liquid detergent immediately before starting the selected washing program. If added in advance or if delayed start is used the detergent may harden inside the machine. Check that the liquid detergent has a proper degree of fluidity. If necessary, dilute it with water.

ATTENTION! Never fill the detergent to above the «MAX» mark.

The laundry detergent should be used in accordance with the manufacturer’s instructions and selected according to fabric type, color, degree of contamination and the washing temperature. Please use only detergents designed specifically for machine washing.

• If there is too much foam, reduce the amount of detergent. Excessive detergent produces too much foam, which lowers the washing quality and overloads the motor.
• The quantity of detergent can depend on water temperature, water hardness, the size and contamination degree of the items to be washed.

CONTROL PANEL

1. Washing Program Touch Buttons
2. Auxiliary Mode and Function Buttons
3. Display

INDICATORS AND READINGS

• А. Child Lock function activation indicator
• B. Door Lock activation indicator
• C. Numeric Indicator

• D. Indicators of active functions.
• E. Program Progress Indicator: The washing program progress with the remaining time of the program is displayed on the light bar during the washing process.

WASHING PROGRAM AND MODE DESCRIPTION

medium degree of contamination
Быстрая стирка (Fast Wash)| Fast washing of a small amount of mildly contaminated clothes for 15 minutes
Хлопок (Cotton)| Washing durable laundry and items made of heat- resistant linen or cotton textile items

Шерсть (Wool)

| Mild washing of woolen clothes to extend their wearing life. Use a special liquid detergent for wool. Do not increase the temperature in this program and remove the clothes from the drum immediately after washing to prevent wrinkling
Дезинфекция (Disinfection)| For clothes that need to be decontaminated

Сушка (Drying)

| Separate program for drying (see description of drying methods in the “Auxiliary Modes and Functions” section below). Before starting the “Drying” program we recommend tumble-drying the wet clothes by using the “Spin” program. Never use this program specially for drying clothes with natural or artificial padding (such as padded coats, downy blankets, jackets with polyester padding, etc.)
---|---
Детские вещи (Kids)| A program designed for contamination typical of children’s clothing. Effective removal of detergent from fabric fibers.

Пуховик (Padding)

| Program for item padded with down or polyester fluff, such as jackets or blankets. We recommend using liquid detergent (as it can be washed out easily) and not loading the drum to more that ¾ of its capacity. Roll in the ends on the clothes before loading them into the machine

Отжим (Spin)

| Separate program for tumble-drying with water drained during and after spinning. In order to drain the water only repeatedly press the drying speed button until “- -” appears on the display. In this case only the water will be drained when the program is started

Очистка барабана (Drum Cleaning)

| Program for removing impurities from the drum. Regular use of this program prevents unpleasant smells, guaranteeing fresh and clean laundry after washing. Clean the drum at least 4 times a year. If the machine is used extensively, clean the drum every month
Очистка сушильного канала (Drying channel cleaning)| A special cycle that is used only to remove fluff that has accumulated in the dryer channel. Do not add any clothes to the drum

SMART

| One-touch program that automatically determines the required washing parameters. Suitable for everyday wear clothes of ordinary fabrics with minor or medium contamination. See “Auxiliary Modes and Functions” section

SUMMARY TABLE OF WASHING PROGRAM PARAMETERS

NOTE:

• In order to achieve optimal washing results follow the instructions related to the maximum weight of the clothes loaded into the machine.
• To save electric power choose longer washing programs with lower water temperatures.
• Washing program duration may vary depending on the actual weight and properties of the laundry, system water temperature and hardness and other parameters.

ATTENTION!
In the event of a power failure the machine will continue the washing cycle from the moment it was interrupted when power supply resumes.

AUXILIARY MODES AND FUNCTIONS

AUTOMATIC DETERGENT DOSAGE
Smart Liquid Detergent Dosage Setup Function.

1. Activating the function: press the power button, select the relevant washing program, then press the automatic detergent dosage button; the relevant detergent dosage level will be displayed on the numeric display.
2. Automatic detergent dosage level adjustment: press the button once again to increase the dosage quantity by 1 level. Five settings are available: AU (automatic), L1 (low), L2 (medium), L3 (high) and OFF.
3. If no liquid detergent is available in the detergent container after activating the automatic detergent dosage function the indicator will turn red and light continuously. Please ad liquid detergent as  necessary.

TEMPERATURE SELECTION
Press the “Temperature” button to change the water temperature for the current washing cycle; the changed temperature value will be displayed in the numeric display.

RINSING NUMBER SELECTION
Press the “Rinse” button to change the number of rinsing cycles for the current washing cycle; the changed number of rinsing cycles will be displayed on the numeric display.

TUMBLE-DRYING SPEED SELECTION
Press the “Speed” button to change the tumble-drying speed for the current washing cycle; the changed tumble-drying speed value will be displayed on the numeric display.

CHILD LOCK
Setting the child lock can prevent erroneous use of the washing machine by children or an external intervention into the washing process.

1. During machine operation press and hold the “Speed” button for 3 seconds to activate or cancel the child lock function.
2. After setting the child lock function an indicator will light up on the display; the door will not open, the control panel is locked, all control panel buttons are deactivated (except the power button). The appliance can only be turned off by pressing the power button. The child lock function will be disabled when the appliance is turned on once again.

OZONE TREATMENT
The “Ozone Refreshing” function can be selected along with other selected programs. With the machine started press the “Ozone Refreshing” button to add the function to the current washing program for refreshing your clothes.

You can also select the refreshing program independently. This can be done in two ways:

1. Press and hold the button for 3 seconds to cancel the selected washing program. The washing program indicator will go out and only the ozone refreshing indicator will light up.
2. When a washing program + refreshing program are selected, press and hold the washing program button for a brief period of time. The washing program indicator will go out, the program will be cancelled and only the ozone refreshing function indicator will light up.

To cancel the ozone treatment mode:

1. When a washing program + refreshing program are selected, press and hold the washing program button for a brief period of time; the ozone treatment indicator will go out, the function will be cancelled.
2. If the ozone treatment function is selected independently, it will be cancelled automatically before any other program is started.

NOTE:

• No water is used in the ozone treatment mode and the drum does not rotate.
• The function is only used for refreshing and deodorizing white and lightcolored clothes.
• Before selecting this function, please ensure that the clothes have no surface finishes that easily oxidize and fade, as well as no inscriptions or patterns applied by ink printing.
• This function is not available in certain washing programs.

LAUNDRY COMPLETION DELAY
Press and hold the “Stains” button for 3 seconds to set the program completion time (delay) which is selectable at an increment of 1 hour up to a maximum of 24 hours. After selecting the desired program, but prior to pressing the START/PAUSE button, repeatedly press the button until the desired delay time appears on the display, e.g. 8 hours; the mode indicator will appear on the display.
NOTE : The washing cycle time will be included in the set program completion delay time.

In order to cancel the function, select a different washing program. The delay indicator will go out.
ATTENTION! The actual time of a washing cycle completion delay may differ from the set delay time, depending on the water supply pressure, drainage type, clothing type, water temperature and other factors.
NOTE : This function is not available in certain washing programs

DRYING

1. WASH+DRY PROGRAM SELECTION METHODS
   Select the washing program by pressing the relevant button, then add the drying function to the washing program by pressing the “Drying” button. The program and function indicators will light up. Select the value corresponding to the desired drying time (AUTO-30-60-90-120-150-180-210-240 (minutes) or “–» to disable the function) by briefly pressing the “Drying” button.

   • Automatic drying: the drying time can be automatically adjusted depending on the quantity and humidity of the clothes. When automatic drying is selected the AUTO value will light up on the display.
   • Drying time selection: select the desired drying time (30-60-90-120-150-180- 210-240) by pressing the “Drying” button. The selected time will appear on the display. Press the START/PAUSE button; the WASH+DRY program will start, the drying process will automatically start upon completion of the washing cycle.

TO DISABLE THE DRYING MODE:

1. Press the “Drying” button; «–» will appear on the display, the drying function will be disabled.
2. Select a different washing program to automatically cancel the drying function.

SELECTING THE “DRYING” PROGRAM
An independent drying program is provided to enable drying only, without starting the washing program.
NOTE : The drying function is suitable for drying cotton clothes. Do not dry items that warp and shrink easily. Press the “Drying” button in the program selection area during the washing process to directly select the independent drying program. Within the independent drying program the automatic drying mode or the desired drying time can be selected by briefly pressing the “Drying” button. After selecting the drying mode press the START/PAUSE button to start the independent drying program.

SETTING THE DOWN-PADDED COAT DRYING PROGRAM
To wash a down-padded coat use the “Wash+Dry” program. Select the “DOWN COAT” and the “AUTOMATIC DRYNG” (AUTO) modes. Do not use the “Drying” program for down coat drying. It is recommended to only dry a down coat once for a better drying effect.

SAFETY PRECAUTIONS FOR THE DRYING PROGRAM:

• If the clothes contain too much moisture, the machine will automatically extend the drying time; this is normal, the drying time will continue to be displayed: «0:20».
• The water supply valve should be open during the drying program, as water is required for cooling and drying during the drying process.
• The maximum drying time is set differently for each model.
• In order to prevent wrinkling of the clothes, caused by excessive drying, you can set a shorter drying time first, and then extend it in accordance with the drying effect.
• It is recommended to run the tumble-drying cycle first before starting the drying program.
• Untie any knots on the clothes after tumble-drying and then put them back into the drum for drying.
• Drying may be uneven in some areas for large and thick clothing items. Please extend the drying time after completion of the first cycle depending on the results.
• Woolen clothes are not suitable for drying.
• Do not dry clothes that easily warp or shrink.
  NOTE : This function is not available in certain washing programs.

PROGRAM TIME ADJUSTMENT
Press the “+” or “-“ buttons to adjust program duration. The correction value will be shown on the numeric display and the washing machine will operate in accordance with the set program time.
NOTE : This function is not available in certain washing programs.

SMART – ONE-TOUCH WASH
In the “Smart” mode the machine measures the weight of the laundry and automatically selects the time and temperature required for washing.

• “AUTO” will appear on the display during the detection stage after program startup. When the appliance is off or on, but no program is running, press and hold the
• START/PAUSE button for at least 3 seconds; the machine will launch the Smart washing mode immediately.

DRUM / DRYING CHANNEL CLEANING

1. After machine startup press the DRUM CLEANING button to enter the program.
2. After machine startup and before starting any program, press and hold the DRUM CLEANING button for 3 seconds and the program will go to the “Drying Channel Cleaning” option. The program run time will appear on the display (0:05). After startup a program for the removal of the lint accumulating in the drying channel will be run to improve drying efficiency. In this mode, press and hold the “Drum Cleaning” button for 3 seconds to exit the “Drying Channel Cleaning” mode and enter the “Drum Cleaning” program, the run time of the “Drum Cleaning” program will appear on the display.
   NOTE : Please do not place any clothes or detergents into the drum when the “Drum Cleaning” and “Drying Channel Cleaning” programs are in progress.

ADDING CLOTHES DURING PROGRAM OPERATION
When the program is running, press and hold the START/PAUSE button to suspend machine operation. The lock indicator will go out; you can now open the door and add or remove clothes. After adding or removing clothes, close the door, and press and hold the START/PAUSE button again; the machine will resume operation from the position in which it was stopped.

ATTENTION! If the water level or temperature is too high the door lock indicator is on and the door cannot be opened; in this case you will not be able to add or remove clothes during machine operation.

DRUM ILLUMINATION

• The illumination will always be on during program or function setup.
• When a program is suspended the illumination can be activated by opening the machine door.
• During program execution the illumination automatically turns on every time a new washing stage starts.
• Touching any button, except the power button will also activate the drum illumination.

LOAD BALANCING SYSTEM
The appliance features an automatic imbalance detection system. If your laundry is not evenly spread around the circumference of the drum, the machine will evenly distributed before tumble-drying. If the machine fails to distribute the clothes within the specified time, the drum will not start spinning, to avoid excessive vibration. In this case you will have to check if the clothes are not entangled and select the “Tumble-Drying” program after rearranging the clothes. If you wash a small quantity of clothes, e.g. a pair of Jeans, a sweater, a bath towel, etc. the machine may not be able to tumble- dry it because of the imbalance protection. Please wash large and small items together whenever you can in order to ensure uniform weight distribution and smooth tumble-drying operation.
ATTENTION! If clothes of different types and materials are washed together the automatic balancing system may repeatedly distribute and arrange the clothes, which will extend the tumble-drying time. This is normal and not a sign of malfunction.

MAINTENANCE

ATTENTION

• Attention! Always pull the plug from the electric socket and close the water supply valve before cleaning, care and maintenance described below.
• Never use solvents for cleaning to avoid damage to the washing machine and the emission of toxic or explosive gases.
• Do not spill water on the washing machine while cleaning.
• Do not use PCMX (chloroxylene) -containing detergents, ethyl alcohol, formic acid or their equivalents for cleaning the appliance, as these substances can damage it.

CLEANING THE APPLIANCE

Regular and careful cleaning of the appliance will allow extending its service life and retain its appealing exterior. If necessary wipe the outer surface of the machine with a mild, non-abrasive detergent. In case of a water spill, immediately collect the water with a towel. Do not use sharp objects to clean the machine to avoid damaging the housing and impeding its operation.

ATTENTION
Never use aggressive chemicals, abrasive cleaning agents or solvents for cleaning the appliance. They can damage the exterior finish.

CLEANING THE INSIDE OF THE DRUM
Wipe the drum dry after each use to remove any residues from the tap water, washing chemicals, dirt and fabric particles, as well as to prevent additional moisture from staying inside the drum and causing mould growth. Metal clothing components (buttons, zippers, studs) can leave rust stains inside the drum – take care to remove these stains without delay. The use of aggressive detergents or rust removers for cleaning the drum is not allowed, therefore regular preventive care is the best solution. Besides, the washing machine has «Drum clean» function to assist you in hygiene maintenance.

CLEANING THE DOOR GLASS AND SEAL
Wipe the glass and seal after each laundry to remove pile and stains. Remove coins, buttons and other small objects from the folds of the door seal after each laundry. Water staying for a prolonged time inside the folds of the door seal can cause an unpleasant smell.

CLEANING THE PUMP FILTER
The drain pump filter can retain scraps of fabric and small foreign objects during laundry. Regularly clean the filter to ensure proper operation of the washing machine. Check the pump if the machine fails to drain water or tumble dry the laundry, as well as if it emits an unusual noise during draining, which may be caused by foreign objects blocking the pump.

• Depending on the program, hot water may be pumped through the drain pump.
• Never remove the pump cover during the rinsing cycle. Wait for the appliance to complete operation in the relevant mode and start draining the water.
• Ensure the filter and the cover plate are properly seated when reinstalling them.

1. Remove the cover plate.
2. Remove the filter by turning it counterclockwise.
3. Remove foreign objects from the filter.
4. Reinstall the filter and close the cover plate.

CLEANING THE WATER INTAKE FILTER

1. Close the valve and disconnect the tube from it.
2. Disconnect the water supply tube from the washing machine. Pull out the filter with long pliers.
3. Clean the water intake filter.
4. Refit the filter and reconnect the water supply tube.
5. Clean the filter every 3 month to ensure proper operation of the washing machine.
   NOTE : Clean the valve filter first, then the filter in the washing machine.

CLEANING THE WASHING AGENT TRAY AND ITS COMPARTMENTS

Clean the detergent drawer regularly to prevent clogging.

Clean the detergent drawer as follows:

1. Press the ejection stop in the drawer (as shown by the arrow in figure 1), release the ejection stop of the drawer and pull out the detergent drawer.
2. Rinse the two storage tanks for powder detergent and softener under running water and rinse off any remaining detergent in the two storage tanks.
3. Put the drawer back in place and slide it back.

NOTES

• During cleaning, do not open the cover of the Intelligent Liquid Detergent Container or tilt or rotate the detergent drawer to prevent the liquid detergent from flowing out of the Intelligent Supply Container.
• Do not turn on the machine if the detergent dispenser compartment is not installed. Always keep the detergent dispenser fully closed.

TROUBLESHOOTING

Washing machine will not turn on

| • Power plug not fully inserted into the socket.

• Poor electric contact.

• Power failure or system fuse blown.

Program execution will not start

| • Door not fully closed.

• ON/OFF button not pressed.

• Start/Pause button not pressed.

• Water supply valve closed, no water intake into the machine. Delayed Start activated.

Machine will not fill water in or error code «Е02» on the display

| • Water supply hose jammed/kinked/twisted.

• Water supply tube not connected to water supply line.

• Water pressure too low. Water supply valve closed.

• No water in the supply system.

• Intake valve filter blocked.

• Start/Pause button not pressed.

Machine constantly fills and drains water or water stays in the drum or washing program stops| • Uppermost point of drain hose located too low. It should be located at 65 to 100 cm above the floor. Wrong drain hose connection to sink/sewage header, causing a back flow into the machine.

• The drain hose end should be placed above the sink bottom to prevent water from flowing back.

• Drain hose end inserted too deep into the sewage pipe.

Machine will not drain water or spin or error code «Е0З» on the display.

| • Pump filter blocked.

• Drain hose kinked/twisted.

• Hose end plugs not removed during installation.

• Drain hose or sink/sewage header blocked.

No spinning| Drying speed set to «0».
Lengthy program duration| Program duration depends on system water pressure and temperature, the amount of foam and the balance during spinning.

Strong vibration during spinning

| • Machine not leveled.

• Transport bolts not removed.

• Machine touches furniture and/or walls.

• Load imbalanced.

---|---
SMART mode will not activate| • A mode other than SMART was selected after machine startup. Turn machine off and press SMART.

• Load imbalanced.

Noise during operation| Some noises may be emitted by the motor, pump and water flow.

Machine will not spin

| Load imbalanced. Machine will not switch to high spinning rpm to avoid damage.

Imbalance can be caused by washing a single heavy item (e.g. padded garment, patchwork blanket, etc.). Try the program once again with a different load.

Leak from the detergent tray

| • Detergent tray compartments clogged with detergent and require cleaning.

• Water pressure too high. Pressure needs to be reduced.

• Machine slanted forward.

Other leaks

| • Water supply tube fittings loose. Check the machine body and tap fittings.

• If the fittings are tight but still leak, replace gaskets in the tube connections.

• Drain hose incorrectly fastened.

Smell| Run the «Drum Cleaning» program.
Door will not open| The door will not open until the lock icon on the control panel goes out after program completion.
Low water level during washing| The level is normal if it is visible in the lower part of the door glass.

Too much foam

| • Detergent is not suitable for machine washing (it should be marked «For washing machines» or «Machine wash»).

• Too much detergent used.

• Less detergent is required if the water is soft.

Miscellaneous| Your washing machine is equipped with sensors that monitor the washing cycle processes and parameters (e.g. water level, temperature, load balance, time / stages).

ERROR INDICATION
In some cases malfunctions can be detected by the washing machine’s microcomputer control system. Warnings are issued as audio signals and error codes displayed:

Е02

|

No water filling

| • Ensure that the supply valve is open.

• Ensure there is water in the system.

• Ensure the supply tube or filter is not blocked.

Е0З| Drain problems| • Clean drain pump filter.

• Ensure that the drain hose is not kinked/jammed/twisted. If the malfunction persists contact a service center.

U4| Door lock failure| Close the door again and press Start/Pause button. If the malfunction persists contact a service center.
Н| Temperature too high| Press Start/Pause to suspend the washing program. Wait for a few minutes. When the temperature in the drum drops to a safe level press Start/Pause to resume the rest of the program.
FXXX| Negative ion level in the drum too high| Press Start/Pause to stop the washing cycle and wait for a few minutes for the anionic count to drop and the error message to disappear.
ЕХX| Miscellaneous errors| Turn machine off. Disconnect power cable and contact the service center for repairs without delay.

NOTE : always verify the cause of the malfunction and rectify it before resuming machine operation. Press Start/Pause once again. If the error code disappears the machine will continue working; if the error code is till displayed – please disconnect the machine from power supply and contact a service center without delay. The contents of garment pockets may block the drain hose or cause damage to the machine. Do not wash clothes that do not have care instruction tags, as well as garments not meant for machine washing.

SPECIFICATIONS

1,1

Power consumption per washing cycle (wash/ dry), kWh|

8,05

175

Total water consumption per year, l| 52800
Drum capacity, l| 64
Noise level during washing (wash/dry), dB| 62/69
Noise level during spinning, dB| 76
Required water supply pressure| 0,03 – 1 MPa
Water resistance class| IPX4
Weight (net/gross), kg| 68/73
Dimensions (WхDхH), cm| 60х48,7х84,7
Dimensions with protruding parts (WхDхH), cm| 60х57,7х84,7

DISPOSAL
Upon expiry of its service life the appliance can be disposed of separately from ordinary domestic waste. You can turn it over to a specialized electric and electronic appliance disposal and recycling centre.

CERTIFICATION DATA, GUARANTEE
The service life of this item is 10 years since the date of sale to the end user, provided the item will be used in strict accordance with the present manual and the applicable technical standards. Upon expiry of the  service life please contact the nearest authorized service centre for suggestions as to further operation of the appliance. The manufacturing date of the appliance is integrated into the serial number (digits 2 and 3 – year, digits 4 and 5 – month of manufacture). If any questions related to appliance maintenance should arise, or if the appliance has malfunctions, apply to the CENTEK TM Authorized Service Center. The address of the service center can be found on the website
https://centek.ru/servis.
Service support contacts: Phone: +7 (988) 24-00-178,
VK: vk.com/centek_krd. General Service Center: OOO «Larina-Servis»,
Krasnodar, Phone: +7 (861) 991-05-42.
The product has the Certificate of Conformity No
№ ЕАЭС RU С-CN.НВ62.В.00884/22 of 27.12.2022.

MANUFACTURER AND IMPORTER INFORMATION
Imported to EAEU by: OOO «Larina-Elektroniks». Address:Russia, 350080Krasnodar, ul. Demusa, 14. Phone: +7 (861) 2-600-900.

DEAR VALUED CONSUMER!
The guarantee period for all appliances amounts to 36 months since the date of sale to the end consumer. With this Warranty Card the Manufacturer confirms the proper condition of the appliance and undertakes to repair, free of charge, all defects caused by the Manufacturer’s default.

GUARANTEE MAINTENANCE TERMS

1. The guarantee shall be valid if the following documentation conditions areobserved:
   • The original Warranty Card shall be filled out correctly and clearly, indicating the of appliance model, serial number and sale date, the stamp of the seller company and signature of its representative shall be available, as well as the stamps on each coupon and the buyer’s signature in the Warranty Card. The Manufacturer reserves the right to reject guarantee maintenance if the buyer fails to provide the abovementioned documents or if the information contained therein is incomplete, illegible or ambiguous.
2. The guarantee shall be valid if the following operation conditions are observed:
   • the appliance is used in strict accordance with the present manual;
   • the safety rules and requirements are observed.
3. The guarantee does not apply to regular maintenance, cleaning, installation and setup of the appliance at the owner’s location.
4. The guarantee does not apply in the following cases:
   • mechanical damage;
   • normal wear of the appliance;
   • non-observance of operation requirements or erroneous actions on the part of the user;
   • improper installation or transportation;
   • natural disasters (lightning, fire, flood, etc.), as well as any other causes beyond the Manufacturer’s or Seller’s control;
   • ingress of foreign objects, liquids or insects into the inside of the appliance;
   • repairs or modifications to the appliance by unauthorized persons;
   • use of the appliance for commercial purposes (loads exceeding normal domestic application), connection of the appliance to utility and telecommunication networks incompliant with national technical standards;
   • failure of the following accessories, if replacement of these is allowed by design and does not involve disassembly of the appliance:
   1. remote control units, rechargeable batteries, replaceable batteries (power ), external power supply units and chargers;
   2. consumables and accessories (packaging, covers, slings, carry bags, mesh screens, blades, flasks, plates, supports, grilles, spits, hoses, tubes, brushes, nozzles, dust collectors, filters, smell absorbers);
   • for battery-powered appliances – operation with inappropriate or depleted batteries;
   • for rechargeable battery-powered appliances – any damage caused by improper battery charging and recharging.
5. The present guarantee is provided by the Manufacturer in addition to the consumer rights determined by the applicable legislation and does not limit these rights in any way.
6. The Manufacturer shall not be made liable for possible damage, directly or indirectly inflicted by CENTEK brand products on people, domestic animals, the consumer’s or third persons’ property if such damage is inflicted as the result of non-observance of appliance installation and operation requirements, deliberate or negligent actions (omission) by the consumer or third persons, as well as of force majeure circumstances.
7. Service centers will only accept appliances in a clean state (there should be no food residues, dust and other contamination on the appliance).

The Manufacturer reserves the right to change the design and specifications of the appliance without prior notice.

References

• VK.com | VK
• Сервис - Официальный сайт Centek

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>