OttLite PL-0360Q LED Desk Lamp with Wireless Charging User Manual
- June 11, 2024
- OttLite
Table of Contents
OttLite PL-0360Q LED Desk Lamp with Wireless Charging User Manual
CONGRATULATIONS! You’ve purchased the finest in natural lighting technology with your new OttLite product.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product Registration Form and return it today by mail, or register online by going to: OttLite.com/warranty
WARNING: To prevent electric shock, make sure the lamp is not plugged in until all steps are complete.
ASSEMBLY INSTRUCTIONS
NOTE: THIS UNIT IS FULLY ASSEMBLED
-
Remove lamp from packing. placing lamp body base (A) flat on a steady surface.
-
Connect power adapter input (B) into connector (C) in the rear-bottom of the lamp.
-
Plug the power adapter (D) into a standard household 120V AC outlet,
Note: Only use with the supplied power adapter to avoid damage or fire. -
Turn the lamp ON/OFF by using power switch (E) located on top of base (A).
-
To power LED settings, slightly touch switch (E) to achieve the following:
- Turn lamp “ON” to 1st brightness setting; touch the switch “once”;
- for 2nd brightness setting: touch the switch “two-times”:
- for 3rd brightness setting; touch the switch “three-times”;
- for 4th brightness setting: touch the switch “four-times”;
- to turn lamp “OFF: touch the switch live-times”.
-
This lamp provides three color modes. To adjust lighting color mode slightly touch switch (M) to switch light color temperature mode: 5000K, 2700K, 1000K,
-
To reposition the light, hold the lamp base (A) or neck (G) steady and more shade (H) up or down depending on needed adjustment. DO NOT FORCE the shade or lamp outside allowable adjustable range as excessive adjustment may cause damage.
WIRELESS CHARGING INSTRUCTIONS
Wireless charging requires a 0i-certified device. To determine if your device is 0i-certified, please visit the Wireless Power Consortium website.
To wirelessly charge a device, perform the following:
- Place the device, which supports Qi wireless charging standard, face up of the middle of the Qi wireless charging icon (F).
- When the device is centered on the Qi wireless charging area (F), a solid BLUE light (J) will come on noting charging mode active. Your device should show charging is taking place.
- Check charge level on your device periodically to determine when device s fully charged.
NOTE: Product DOES NOT provide any indication of when device is fully charged.
CAUTION! Device may become warm during charging. This is normal and part of the process. Charging times vary by device.
SAFETY WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
- Turn lamp off and WAIT UNTIL LAMP HEAD IS COOL before handling.
- The LED panel (K) might get hot after several hours of continuous use DO NOT place your hands directly on LED light panel.
- Never use with an extension cord unless the plug can be fully inserted into the receptacles in the extension cord.
- Do not alter the plug.
- The lamp head included with this unit cannot be replaced by the consumer.
- INDOOR USE ONLY.
NOTE: The important safety instructions appearing in this instruction sheet ale not meant to cover all possible conditions and situations that may occur. It must De understood that common sense, caution, and care must be used with any ele:trical product.
CAUTION! IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR ITS SERVICE AGENT OR A SIMILAR QUALIFIED PERSON IN ORDER TO AVOID A HAZARD. INDOOR USE ONLY.
CAUTION! THE LIGHT SOURCE CONTAINED IN THIS LUMINAIRE SHALL ONLY BE REPLACED BY THE MANUFACTURER OR HIS SERVICE AGENT OR A SIMILAR QUALIFIED PERSON.
CAUTION: Any change or modification to product not expressly recognized by OttLite Technologies voids OttLite’s responsibility for proper function of product.
FCC WARNING
This device complies with Part 15 of the FCC Rules_ Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received. including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver,
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC WARNING
This device contains licence-exempt transmitter(s)/receiver that comply with Innovation, Science and Economic Development Canada’s licence-exempt ASS(s). Operation is subject to the following two conditions:
- This device may not cause interference
- This device must accept any interference, including interference that may cause undesired operation of the device.
RF EXPOSURE CONSIDERATIONS:
This Equipment compi.es wan the FCC RF radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20cm between the radiator and any part of your
body.
This equipment meets the exemption from the routine evaluation limits in sect on 2.5 of RSS-102. It should be installed and operated with a minimum distance of 2)cm between the radiator and any part of your body.
CAN RSS-216
CAN ICES-005 (B)/NMB-005 (B)
Qi CHARGER SPECIFICATION:
Output: up to 5 Watts depending on device
The “Qi” symbol is a trademark of the Wireless Power Consortium.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>