JUNO JSBT 4IN SlimBasics Tapered Switchable Mount Disk Light Installation Guide

: June 11, 2024
: Juno

Table of Contents

JUNO JSBT 4IN SlimBasics Tapered Switchable Mount Disk Light
Product Information
Product Features
Applications
Specifications
Product Usage Instructions
Dimensions
Performance
ORDERING INFORMATION
JBOX Compatibility
Install In 3 Simple Steps
- Installation
Warranty
PHOTOMETRICS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JUNO JSBT 4IN SlimBasics Tapered Switchable Mount Disk Light

Product Information

The Juno SlimBasics JSBT Tapered Switchable White LED Surface Mount Disk Light is available in two sizes: 4 inches and 6 inches. It is designed to be paired with an inexpensive recessed junction box, providing an economical alternative to recessed downlighting. The integrated 3CCT switch (3000/4000/5000K) allows the end user to fine-tune the feel of their space, while the two available sizes insure you will have the right amount of light. The JSBT Switchable White Tapered LED Disk Lights can be used to comply with 2019 JA8 High Efficacy LED Light Source Requirements.

Product Features

Two available sizes : 4 inches and 6 inches
Integrated 3CCT switch (3000/4000/5000K)
Can be used to comply with 2019 JA8 High Efficacy LED Light Source Requirements
Delivers up to 830 Lumens (JSBT 4IN) and up to 1090 Lumens (JSBT 6IN) 90+ CRI
Dedicated 120V Phase Dimming down to 10%

The SlimBasics JSBT Switchable White Tapered LED Disk Lights are designed to be paired with an inexpensive recessed junction box providing an economical alternative to recessed downlighting. Additionally, the JSBT offers the ultimate in flexibility for both new construction and renovations. An integrated 3CCT switch (3000/4000/5000K) allows the end user to fine-tune the feel of their space, while the two available sizes (4″ and 6″) insure you will have the right amount of light.

Applications

The Juno SlimBasics JSBT Tapered Switchable White LED Surface Mount Disk Light is suitable for both new construction and renovations. It is ideal for use in residential, commercial, and hospitality applications.

Designed to be used across an entire space where traditional downlights have been used in the past
Ideal for residential single and multi-family, as well as light commercial and hospitality spaces
The wet location rating makes them perfect for use in bathrooms, soffits, and outdoor covered ceiling areas.
Installs directly into industry standard junction boxes
Suitable for use in closets, compliant when installed to NFPA® 70 NEC® Section 410.16 (A)(1) and (C)(1)

Specifications

Width : JSBT 4IN – 7.09 inches, JSBT 6IN – 8.39 inches
Depth : JSBT 4IN – 1.29 inches, JSBT 6IN – 1.34 inches
Lens Opening : JSBT 4IN – 4.13 inches, JSBT 6IN – 5.62 inches
Electrical Connections : Fixture provided with leads for direct wire connection in JBox

Construction
Low profile tapered aluminum trim frame with matte finish Molded polycarbonate, UV stabilized diffuser dome lens conceals the LEDs from direct view and provides uniform lens luminance.

LED Light Engine

LED board mounted directly to aluminum housing designed to provide superior thermal management and ensure long life
Switchable white LED color temperature technology offers 3000K, 4000K, 5000K all in one disk light
90 CRI minimum
Accommodates 120 volts AC at 60Hz
Dimmable with most standard magnetic low voltage and electronic low voltage dimmers

Electrical Connections
Fixture provided with leads for direct wire connection in JBox

Product Usage Instructions

To install the Juno SlimBasics JSBT Tapered Switchable White LED Surface Mount Disk Light, follow these three simple steps:

Choose a compatible junction box for installation (refer to the JBOX Compatibility table in the user manual).
Connect the fixture leads to the power source in the junction box.
Mount the fixture onto the junction box using the appropriate accessory (refer to the ACCESSORIES table in the user manual).

The Juno SlimBasics JSBT Tapered Switchable White LED Surface Mount Disk Light is compatible with most standard phase dimmers (refer to the Dimmer Compatibility table in the user manual). To adjust the color temperature, use the integrated 3CCT switch (3000/4000/5000K).

Project:
Fixture Type:
Location:
Contact/Phone:

Dimensions

Performance

Delivered Lumens| JSBT 4IN = Up to 830L

JSBT 6IN = Up to 1090L

---|---
LED Color Temperature| 3000K/4000K/5000K
CRI| 90+
Voltage| Dedicated 120V
Dimming| Phase Dimming down to 10%

ORDERING INFORMATION

Example : JSBT 4IN SWW2 90CRI WL MW M6

Series| Color Temperature| CRI| Wet Location| Color Finish
---|---|---|---|---
JSBT 4IN **** 4″ Juno Tapered Disk Light

JSBT 6IN **** 6″ Juno Tapered Disk Light

| SWW2 3000K/4000K/5000K| 90CRI 90CRI| WL Wet Location| MW Matte White
ACCESSORIES

Notes:
1 JSBTTRIM only compatible with SWW2 non-PIR fixtures

JBOX Compatibility

| 3-1/2″ Octagon Box Steel| 4″ Drawn Octagon 1-1/2″ Deep Steel| 3-1/2″ Drawn Round Ceiling Pan Steel / Old Work| 4″ Round Plastic / New York| 4″ Drawn Round Ceiling Pan Steel| 4″ Round Plastic / New Work| 4″ Dia. Ceiling Box With Bar Plastic / New York
---|---|---|---|---|---|---|---
| | | | | |

Exterior LXWXH| 3.2″ x 3.2″ x 1.55″| 3.54″ x 3.54″ x 1.55″| 3.38″ Rd. x 0.5″ Dep.| 4″ Dia. x 2.3″| 4″ Dia. x 0.5″ Dep.| 4″ Dia. x 2.375″| 14.5″ x 4.5″ x 4″
Mounting Dimension| 2.75″| 3.5″| 2.75″| 2.75″ / 3.5″| 3.5″| 2.75″ / 3.5″| 2.75″ / 3.5″
Fixture| JSBT 4IN/ JSBT 6IN| JSBT 6IN| JSBT 4IN/ JSBT 6IN| JSBT 4IN/ JSBT 6IN| JSBT 6IN| JSBT 4IN/ JSBT 6IN| JSBT 4IN/ JSBT 6IN
| 4″ Square Box| WiringPro 4″ Square Box| Iberville 4″ Octagonal Box
---|---|---|---
| | **
Exterior LXWXH| 4″x 4″ x 1.5″| 4″ X 4″ X 1.5″| 4″ x 4′ x 1.5″
Mounting Dimension| 4″| 4″| 4″
Fixture**| JSBT 4IN| JSBT 4IN| JSBT 4IN

Canadian 4IN J-Box Bracket

Install In 3 Simple Steps

JUNO-JSBT-4IN-SlimBasics-Tapered-Switchable-Mount-Disk-Light-
FIG-14

Dimmer Compatibility

Forward Phase Dimmers| Reverse Phase Dimmers| Acuity Brands Dimmers
---|---|---
Lutron Maestro® STCL-153| | Acuity SensorSwitch® Forward phase paddle dimmer/WPD WH
Lutron RadioRa® RRD-10ND| Lutron Maestro ELV® MAELV-600|
Lutron Diva® DVCL-153P| |
Lutron Vive® MRF2S-6ND| |
Lutron Caseta® PD-6WCL| |
Leviton SureSlide® IPM06-1LZ| |
Leviton Illumatech® IPL06-10Z| |

Installation

Junction Box Mounting
The driverless JSBT installs directly into industry standard junction boxes that requires no separate mounting bracket for installation

Compatible boxes include 3-1/2″ and 4″ octagon junction boxes (1-1/2″ minimum depth), round mud rings with 2-3/4″ mounting centers, and 3″ & 4″ diameter non-metallic boxes
Provides fast installation of fully assembled fixture to JBox
Suitable for ceiling mount
Suitable for use in closets, compliant when installed to NFPA® 70 NEC® Section 410.16 (A)(1) and (C)(1).

Life
High performance, long functional life of 50,000 hrs (L70).
Labels
ETL listed for US and Canada

ENERGY STAR® Certified
Suitable for indoor wet locations
Certified to the high efficacy requirements of California T24 JA8-2019.

Testing
All reports are based on published industry procedures; field performance may differ from laboratory performance.

Warranty

5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and- conditions

Note : Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice.