juno JSFSQ Series Slimform LED Surface Mount Downlight Installation Guide
- June 11, 2024
- Juno
Table of Contents
- juno JSFSQ Series Slimform LED Surface Mount Downlight
- PRODUCT DESCRIPTION
- PRODUCT SPECIFICATIONS
- INSTALLATION
- DIMENSIONS
- SQUARE SPECIFICATIONS
- EMERGENCY BATTERY FOR 12″ AND 14″ ONLY
- PERFORMANCE DATA
- ORDERING INFORMATION
- PHOTOMETRIC
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
juno JSFSQ Series Slimform LED Surface Mount Downlight
FOR J-BOX INSTALLATION
- Project:
- Fixture Type:
- Location:
- Contact/Phone
PRODUCT DESCRIPTION
- Sleek, ultra-low profile energy efficient LED surface mount downlights in multiple sizes from 5″ to 14″
- Provides economical installation by mounting directly over standard and fire-rated junction boxes
- Optional finish trims and shrouds available for custom, designer look similar to standard recessed downlights
- Provides general illumination in residential and commercial applications including multi-family and hospitality
- Ideal for use in corridors, living spaces, closets, hallways, pantries, stairways, outdoor covered areas without Emergency Option and much more.
PRODUCT SPECIFICATIONS
- Construction
- Shallow, less than 1″, solid square housing with white finish
- Non conductive fixture for shower light applications
- Optional, field installable finish trims available for 5″ and 7″ versions to change the exterior finish of fixture
- Optional, field installable decorative baffle and cone shrouds for 5″ and 7″ versions provide the aesthetic and source shielding similar to the experience of a fully recessed downlight.
- Optics
- Light quide technology combined with diffusing lens conceals the LEDs from direct view and provides uniform lens luminance.
- LED Light Engine
- LEDs mounted directly to heatsink designed to provide superior thermal management and ensure long life
- 2700K, 3000K, 3500K or 4000K LED color temperature • LEDs binned for 4-step MacAdam ellipse color consistency • 90 CRI minimum.
- LED Driver
- Choice of dedicated 120 volt (120) driver or universal voltage (MVOLT) driver that accommodates input voltages from 120-277 volts AC at 50/60Hz
- Power factor > 0.9 at 120V input
- 120 volt driver is dimmable with the use of most incandescent, magnetic low voltage and electronic low voltage wall box dimmers
- Universal voltage driver is dimmable with the use of most 0-10V wall box dimmers
- External driver on 5″ and 7″ models only
- For a list of compatible dimmers, see JUNOSLIMFORM-DIM.
- Emergency Battery
- Option Available on fixture sizes 12″ and larger
- Battery factory assembled to fixture with integral test switch (EL option)
- Drives LEDs for 90 minutes to meet Life Safety Code (NFPA-LSC), National Electrical Code (NEC), and UL requirements
- Title 20 certified battery pack available when ordering E10WLCP option
- EBX option provides a back box without battery for a consistent look when used in the same space as fixtures with the EL emergency option
- Damp location only with emergency option.
- Life Rated for 50,000 hours at >70% lumen maintenance.
- Labels ENERGY STAR® certified
- Certified to the high efficacy requirements of California T24 JA8-2016
- CSA is listed for US and Canada
- Suitable for wet locations (covered ceilings)
- Damp location only with emergency option.
- Testing
- All reports are based on published industry procedures; actual performance may differ as a result of the end-user environment and applications. All values are designed or typical values, measured under laboratory conditions at 25 °C.
- Warranty
- 5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions
- Note : Actual performance may differ as a result of end-user environment and application.
All values are designed or typical values, measured under laboratory conditions at 25 °C.
Specifications are subject to change without notice.
INSTALLATION
Junction Box Mounting
- Fixture provided with leads for direct wire connection in j-box • Installs directly to industry standard junction boxes
- Compatible boxes include 4″ metal or plastic octagonal standard and fire-rated junction boxes (3 1/2″ junction box screw-hole spacing required for installation)
- Minimum 2 1/8″ deep junction box required for 5″ and 7″ fixtures (no depth requirement for 12″ and larger fixtures)
- Quick mount bracket provides fast installation of fully assembled fixture to junction box Suitable for ceiling mount
- Suitable for use within closet storage spaces when installed per NEC requirements. Junction box sizes vary – Verify compatibility with the fixture prior to installation
DIMENSIONS
External driver available on 5″ and 7″ models only.
SQUARE SPECIFICATIONS
All dimensions are in inches (centimeters) unless otherwise indicated.
EMERGENCY BATTERY FOR 12″ AND 14″ ONLY
PERFORMANCE DATA
| JSFSQ 5IN| JSFSQ 7IN| JSFSQ 12IN| JSFSQ
14IN
---|---|---|---|---
| 120V| MVOLT| 120V| MVOLT| 120V| MVOLT|
120V| MVOLT
Lumens| 700| 700| 1000| 1000| 1300| 1300| 1800| 1800
CRI| 90CRI| 90CRI| 90CRI| 90CRI
CCT| 27K, 30K, 35K, 40K| 27K, 30K, 35K, 40K| 27K, 30K, 35K, 40K| 27K, 30K,
35K, 40K
Voltage| 120V| 120V-277V| 120V| 120V-277V| 120V| 120V-277V| 120V| 120V-277V
Input Power| 10W| 10W| 13W| 13W| 15W| 15W| 20W| 20W
Input Current| 110MA| 50MA| 150MA| 60MA| 180MA| 80MA| 240MA| 110MA
Frequency| 50/60Hz| 50/60Hz| 50/60Hz| 50/60Hz
Power Factor| >0.9| >0.9| >0.9| >0.9
ORDERING INFORMATION
| | | | | |
---|---|---|---|---|---|---
Series| Size/Lumens| Color Temperature| CRI|
Voltage/Driver| Finish| Emergency Battery 1,2,3
JSFSQ SlimForm
Surface Mount Downlight – Square
| 5IN 07LM 5″, 700 Lumens
7IN 10LM 7″, 1000 Lumens
12IN 13LM 12″, 1300 Lumens
| 27K 2700K
30K 3000K
35K 3500K
| 90CRI 90+ CRI| 120 FRPC** Dedicated
120V, Forward Reverse Phase Dimmnig
| WH White| EL3† Battery Back-up Option
EBX Empty Back Box for Aesthetics
E10WLCP4† EM Self-Diagnos-
tic battery pack, 10W Constant Power, Certified in CA Title 20 MAEDBS.
| 14IN 18LM 14″, 1800 Lumens| 40K 4000K| | MVOLT ZT** Universal|
| | | | Voltage|
| | | | 120V-277V,|
| | | | 0-10V|
| | | | Dimming|
- EL Battery backup option is not Energy Star certified
- See Option Value Ordering Restrictions
ACCESSORIES
TRIM – Optional, field installable finish trim rings available to change
the exterior finish of fixture.
Example: JSFSQTRIM 5IN BL
| |
---|---|---
Series| Size| Finish
JSFSQTRIM SlimForm
Accessory Trim – Square
| 5IN5 5 inches
7IN6 7 inches
| BL Black
BZ Bronze
SN Satin Nickel
** Option Value Ordering Restrictions
JSFSQ 120V Fixtures
Option Value| Restriction
5IN| Not available in 27K, 35K, and 40K CCT
7IN| Not available in 27K, 35K and 40K CCT
12IN| Not available in 27K, 30K and 35K CCT
14IN| Not available in 35K CCT
JSFSQ MVOLT Fixtures
5IN| Not available in 27K and 35K CCT
7IN| Not Available in 35K
12IN| Not available in 27K, 30K and 35K CCT
14IN| Not available in 27K CCT
Notes:
- Emergency battery available with 12IN and 14IN only.
- The emergency battery is only available with MVOLT ZT.
- Emergency battery option not available in California due to Title 20 restrictions.
- The E10WLCP ordering option is Title 20 certified for shipments to California.
- Only available in BL and SN finishes.
- Only available in BL finish.
PHOTOMETRIC
Distribution /Curve Distribution /Data Coefficient of Utilization /Illuminance Data at 30″ Above Floor for a Single Luminaire
JSFSQ 5IN 27K, 2700K LEDs, input watts: 9.8, delivered lumens: 708, LM/W =
72.2, test no. ISF 33598, tested in accordance to IESNA LM-79.
JSFSQ 7IN 27K, 2700K LEDs, input watts: 12.9, delivered lumens: 1076, LM/W =
83.4, test no. ISF 33601, tested in accordance to IESNA LM-79.
JSFSQ 12IN 27K, 2700K LEDs, input watts: 14.7, delivered lumens: 1298, LM/W =
88.3, test no. ISF 33664, tested in accordance to IESNA LM-79.
JSFSQ 14IN 27K, 2700K LEDs, input watts: 20.4, delivered lumens: 1804, LM/W =
88.4, test no. ISF 33662, tested in accordance to IESNA LM-79.
For 30K fixtures, use 1.02 multiplier; For 35K fixtures, use 1.03
multiplier; For 40K, use 1.07 multiplier.
One Lithonia Way
Conyers, GA 30012
Phone 1-800-705-SERV (7378)
Visit us at www.acuitybrands.com
Printed in U.S.A. © 2017-2023 Acuity Brands Lighting, Inc. 02/27/23
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>