FLINQ FQC8269 Wireless QI Clock Instruction Manual
- June 11, 2024
- FlinQ
Table of Contents
FLINQ FQC8269 Wireless QI Clock Instruction Manual
Welcome to the FlinQ family
Thanks for purchasing one of our items! To ensure continuous operation and
accuracy, please read these operating instructions carefully before use and
save this manual for future use. Passing certain procedures may result in
incorrect reading and incorrect use of this product. We hope that you will
enjoy using your new FlinQ-product! If by any chance the item is damaged,
defective or broken, you are covered with warranty! Please do not hesitate to
contact us for any questions, concerns or suggestions at the email address as
mentioned in this manual.
Register your FlinQ product
We can imagine you want to treat your FlinQ item carefully. Register your
product and you will be entitled to the following:
- 1 year extra warranty (2+1)
- Personal support
- Digital warranty certificate
- Digital manual Scan the QR code or go to flinqproducts.nl/registration
https://www.flinqproducts.nl/registration
Safety Information
Please read this manual thoroughly before using the product! Keep it in hand for future reference. Warnings alert the user to potential serious outcomes, such as injury or adverse events to the user. Cautions alert the user to exercise care necessary for the safe and effective use of the product. Notes contain important information that may be overlooked or missed. This product can be used indoors only (see below for more info). This appliance may be used by children aged 12 and over, and by persons with reduced physical, sensory or mental capacities or a lack of sufficient experience and/or knowledge, provided they are supervised or have been trained in the safe use of the appliance and understand the potential dangers. Cleaning and maintenance must not be carried out by children without supervision. Children must not be allowed to play with the appliance. Keep the packaging material away from children. There is a risk of suffocation! Do not allow unsupervised children to clean or maintain this device.
Warning: Do not leave packaging material lying around carelessly. This may become dangerous playing material for children. Risk of suffocation!
Danger: due to swallowing small parts. Keep these away from children. Risk of suffocation!
Avoid danger to life by electric shock
– Do not operate the unit with a damaged power line or damaged power plug.
– Damaged power lines represent danger to life by electric shock.
– Check the power lines regularly for damages and aging. If the power line is
damaged, it must be re- placed by the manufacturer, his / her representative
or a similarly qualified person in order to avoid safety hazards.
– Protect the power line against sharp edges, mechanical strain and hot
surfaces.
– Do not switch on the unit if you notice visible damages (e.g. tears or
cracks) or if you assume that the unit is damaged (e.g. after having fallen
down).
Notes:
– Do not open the device yourself.
– This device is not a toy, keep it away from children!
– Do not use with appliances that could cause any fire in unattended use (like
irons etc.).
– Any other use as the intended way for this device is not validated for any
warranty or liability.
– This device is only used for domestic and private use!
– Do not use the device excessively and do not store them under heavy
pressure. The device is not resistant to heat and water.
– Avoid rain, dampness or contact with other liquids
Specifications
This product is a clock + charger product. It is developed for giving date and time and the possibility for wireless charging at the same time. Read and follow the instructions contained in this manual carefully. Keep these instructions at a safe place for future reference. Dispose of packaging material to local applicable regulations. The operating life of the product will be less if the ambient temperature is higher than 45°C or lower than -10°C.
Main use cautions before first use
– Choose a stable, solid and supportive surface and make sure the clock is set
correctly.
– Do not place or immerse the clock under water like pools and ponds! It is
not waterproof.
– Make sure the cables cannot cause a trip hazard.
– This device is intended for inside use only.
– This is not a toy, keep it away from children below 12 years.
– Do not open or disassemble the device yourself, this will void the warranty
at all times.
– Do not disassemble, repair or modify the product by yourself as this may
result into an electric shock.
– The led lamp source is not replaceable.
– If the cable is damaged or broken please contact your seller for correct
replacement by the manufacturer only.
– Do not stand, sit on, jump or throw with the device at all times.
– Do not throw this product in the air to avoid damage caused by falling.
– Only use the device for its intended designed use.
– Take good care of the product and clean it regularly.
– Never touch the plug contacts with sharp or metal objects.
– Use only the original supply and original accessories.
– Protect the device from special liquids and vapors
– Please note that the power USB port of the device should not have water
infiltration. Otherwise, it will cause a product failure.
– Do not charge or store the product in a place below 0°C or above 40°C ,
otherwise the product performance will be reduced.
Read and follow all the safety instructions
– Do not install/use/throw near a gas, electric radiator, fireplace, candles,
or other sources with a similar heat or explosion/flammable liquids and
gasses.
– Damage from this housing/ device can cause explosion and/or fire.
– Do not staple, nail, or hook the power cable.
– Never touch the plug contacts with sharp or metal objects.
– Do not hang the device only by the electric cables.
– An electric product is not a toy! To avoid the risk of fire, burns, injuries
or electric shock, the power cable should not be left within the reach of
children.
– Do not use the product outside its intended use.
– Do not hang ornaments or other objects on the device cables.
– Do not close windows and doors on the power cord so as not to damage the
insulation.
– Do not cover the product with a material (paper, cloth, etc.) that is not
part of the product when in use.
– Read and follow all instructions that are indicated on the product or
supplied with it.
– Keep this manual for future reference.
Product general description
- 24-hour clock indicator/alarm setting indicator
- Simultaneously clock and temperature display (Built-in Temperature sensor)
- Wireless Charging + Indicator
- USB Type-C Power connection
Features
– Real Bamboo Material housing
– 1 Programmable alarm
– Time memory function (CR2032 battery included)
– Sound Activated (power saving function)
– Snooze function
– Two brightness adjusting mode: automatic adjusting mode or 7 levels of
brightness by manual adjusting turn knob
– 12/24 hour switching setting: press TIME’ and hold 3 seconds to switch – C/F conversion: switching by pressingENTER’
Before using this product
– Don’ t let children play with the appliance; always supervise children that
are using or maintaining the appliance.
– If you are wearing a pacemaker or other electronic medical implants device,
you should seek your doctor’s advice before using this product.
– Use only manufacturers recommended attachments as described in this manual,
misuse or use of any accessory or attachment other than those recommended, may
present a risk of personal injury.
– Keep the appliance and accessories away from hot surface.
– Do not block the appliances openings or hinder air flow, keep openings free
of any objects including dust, clothing, fingers (and all other parts of the
body).
– Particularly keep hair away from openings and moving parts if possible.
Danger: Any operations that oppose to description in this user manual may lead to harm to human or this product device.
Special use features
- This product is powered by a 5V USB Type-A QC3.0 (Qualcomm) adapter (included) with minimum 2000mA = 2A (10W) output. Type-C power cable is included and to be used for this QC3.0 adapter and clock only.
- This product has a sound ON-function.
- This product has a wireless charger function to charge mobile phones that have a built-in QI-function.
- This product has a 7 steeples dimmer function for the display light brightness to select as needed by the turn knob at the back side.
First use
Connect the Alarm Clock with the provided QC3.0 230V power adapter + Type-C
USB cable and press the RESET-button with a paperclip at the back. Then the
light of the screen will display 0000′1111′, 2222′,3333′, 4444′ ,5555′
,6666′ ,7777′ ,8888′ ,9999′ in turn, and then show some dots on the
screen. Now you will hear a buzzer ring a sound like “Bliep”. It will enter
the time mode, the default time is 12:00, 24-hour with the default date.
Time setting
Long press the TIME button to enter the TIME setting, and then click the TIME
button to select the time display to be adjusted. The adjustable mode sequence
will be YEAR, MONTH, DAY, HOUR, MINUTE, 12/24 hour switching setting. After
selecting the time display (when flashing), turn the adjustment wheel to
adjust year, month, day, hour and minute at the same time. Press TIME to
confirm after each setting for the working status of time display. The system
will automatically save your setting and return to time display if no further
action within 10 seconds.
After setting the time display mode as 12-hour, the PM display will be replaced by the light at the top left.
Alarm mode setting
Long press the ALARM button to enter the ALARM setting (the time position and
bell symbol will flash at the same time), the alarm is a total of 1 group, and
the position where the alarm is flashing is the one to be adjusted. After
selecting the correct time alarm (when flashing), turn the adjustment wheel to
adjust the alarm hour + or and press ALARM to confirm and re-enter the alarm
sub setting mode. After all is completed press ENTER again to return to the
normal display time interface. TIP: When the alarm is turned on, the alarm
symbol will be on constantly. When alarm time is achieved, alarm will sound
and the alarm symbol will flash till the alarm is switched OFF again.
Alarm clock / snooze
Toggle/Slide switch control alarm setting to be ON or OFF. The alarm switch is
controlled by the toggle/slide switch, turn on the alarm, and the alarm symbol
is always on. The alarm is heard and the alarm symbol flashes at the same
time. When the alarm is sounded and till press any other key to enter the
snooze manually. The number of snoozes is 5 times, and each snooze is 9 min,
press any key to turn off the alarm in the snooze state, and it will activate
automatically the next day in the alarm again.
Charging your QI-compatible mobile phone
Simply place your QI -Compatible device on top middle section (at wireless
icon) of the CLOCK, it will start charging automatically and the phone
charging indicator will light up.
Display mode
Press 1x TIME to switch the display mode: DP-2 fixed display time temperature,
DP-1 time + temperature display for 10 seconds and switch month and day
displayed for 2.5 seconds and switch display temperature for 2.5 seconds
again. TIP: C/F temperature conversion: switching by pressing 1x `ALARM’ in
normal clock state. The temperature ranges from -20°C. to 50°C. or -4°C. to
122°C.
Brightness adjustment
Dial the turn knob adjustment wheel in normal mode to adjust the brightness of
7 levels. Brightness has a memory function, during the day time (7:00-17:59)
adjust the brightness to remember the brightness of the daytime period, and at
night (18:00-6:59) adjust the brightness to remember the brightness of the
night time period. If the brightness is not set manually, 18:00-6:59 (default
L1 is the darkest), 7:00-17:59 (default L7 is the brightest) automatically.
Sound control switch setting
Press 1x ENTER to switch the voice switch, ONSD turns ON the sound control
display for 13 seconds and to turn off the screen after that. From now on if
any sound or voice is greater than 75dB it will wake-up the display (like by
tapping the top or side of the clock during night). If switch to –SD it turns
OFF the sound control and the display is always ON again.
Alarm tone setting
Long press ENTER to enter the sound type adjustment. The display will show
U1-U5 and at the same time a “bliep-bliep” is sounded. Then toggle the
adjustment wheel knob to adjust the sound volume as desired.
Reset function
When some of the functions is abnormal or the display or functions are
abnormal (such as nothing displayed in the screen when the power is plugged in
or even when the battery is installed), press the RESET button on the back of
the product to re-activate all.
Pay attention
– Please note that the charging port of the device should not have water
infiltration. Otherwise, it will cause a product failure.
– Do not charge or store the product in a place below 0°C or above 40°C,
otherwise the product performance will be reduced.
– It is a normal phenomenon that temperature of the adapter rises during
charge use.
Security and important safety instructions
Class III equipment: This is a class III device and can only be used with low
voltage power, connection only to SELV power-circuits. When using electrical
products, certain precautions must be followed, including the following:
– This product is suitable for indoor use and it’s not waterproof IP-6X, do
not submerse under water!
– Please use the rated input voltage power supply of the product as mentioned
on the back label.
– Do not install near a gas device or other sources with a similar heating
process.
– Do not use the product outside its intended use.
– Read and follow all instructions that are indicated on the product or
supplied with it.
– Keep this manual for future reference.
Instructions for use and maintenance In case of non-use, store the product in
a cool and dry place away from direct sunlight.
Caution: NON-Replaceable LED lights!
Note:
– Use with caution at all times.
– Product specifications are subject to change without notice.
– If disassemble the device without authorization, we cannot guarantee the
quality.
Cleaning the device
– Make sure the device is kept dust free and clean. Clean it regularly with a
dry anti-static lint free cloth and dry the device before turning it ON again.
– Please do not immerse the main unit in water, it is not waterproof!
– Wipe gently with a clean soft cloth (microfiber) dampened with water or a
mild detergent.
– Do not use a strong aggressive/irritant lotion such as gasoline, alcohol,
cleaning agents or rubber water.
Troubleshooting
Display does not turn on or is abnormal and/of function is not working? – Try to power on/off and use max brightness by the brightness knob on the back itself. Or RESET if needed as described in this manual.
Memory loss function? The battery is sufficient?
– Check the CR battery control built-in and replace if needed. Or remove the
old battery by pressing the tab on the side of the battery cover and slide of
the cover from the back of the clock. Take notice of the positive (+) and
negative (-) side of the battery, make sure that the new battery (CR2032 3V)
is inserted the right way. Slide the cover back on and dispose of the old
battery responsibly.
Note: Remove the batteries from the product if it is not used for a long time (1 month or longer).
Waste electrical & electronic equipment
Batteries and rechargeable batteries do not belong in the household waste! You are required by law to dispose of used batteries and rechargeable batteries to a collection point in your municipality or city administration or to a specialist battery dealer so please return the battery/device to the collection point which will dispose of the device and/or battery properly. If te battery is built-in inside the product , open the product and remove the battery!
Separate collection
This crossed out wheelie bin symbol means the product must not be discarded
with the general household waste. There is a separate collection system for
these products. Please dispose of responsibly at an approved waste or
recycling facility.
WEEE, the waste electrical and electronic equipment directive 2002/96/ EC and 2012/19/EU: This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Do not dispose of batteries in your household waste. Dispose of this product and/or batteries by taking them to your local recycling store or station for free, contact your local government office for more details. If possible please dispose the batteries separately as stated by law and let it be recycled separately or give it at your local sales store/distributor/dealer that dispose it correctly and free of charge at all times. By recycling, reusing the materials or other forms of utilizing old devices/batteries, you are making an important contribution to protecting our environment and use way.
Disclaimer
Information in this document is subject to change without notice. The
manufacturer does not make any representations or warranties (implied or
otherwise) regarding the accuracy and completeness of this document and shall
in no event be liable for any loss of profit or any commercial damage,
including but not limited to special, incidental, consequential or other
damage. No part of this document may be reproduced or transmitted in any form
by any means, electronic or mechanical, including photocopying, recording or
information recording and retrieval systems without the expressed written
permission of the manufacturer. Our company owns all right to this unpublished
work and intends to maintain this work as confidential. Our company may also
seek to maintain this work as an unpublished copyright. This publication is to
be used solely for the purpose of reference, operation, maintenance or repair
of our equipment. No part of this can be disseminated for other purposes. In
the event of inadvertent or deliberate publication, our company intends to
enforce its right to this work under copyright laws as a published work. Those
having access to this manual may not copy, disseminate or disclose the
information in this work unless expressly authorized by our company. All
information contained in this manual is believed to be correct. Our company
shall not be liable for errors contained herein nor for incidental or
consequential damages in connection with the furnishing, performance, or use
of this material. This publication may refer to information and protected by
copyrights or patents and does not convey any license under the patent rights
of our company, nor the rights of others. Our company does not assume any
liability arising out of any infringements of patents or other rights of third
parties described at any time without notice or obligation. Also, content of
the manual is subject to change without prior notice.
Warranty
The warranty begins on the date of purchase and expires after 24 months. The
warranty period is considered to have started three months after the date of
manufacturing indicated on the product or as derived from the serial number of
the product. If any defect due to faulty materials and/or workmanship occurs
within the warranty period contact us immediately, we will make arrangements
for service. Where a repair is not possible or is deemed uneconomical we may
agree to replace the product. Replacement will be offered at our discretion
and the warranty will continue from the date of original purchase. The
warranty applies provided the product has been handled properly for its
intended use and in accordance with the operating instructions.
Support, warranty and questions information:
[email protected]
Copyright/Trademark
This is a trademark of FlinQ Commerce BV. Other brands and product names,
logos are tradenames or trademarks/logos of their rightful owners. All
specifications are subject to change without any official notice.
This product is designed, produced and tested in accordance with the strictest
European safety directive’s and test standards.
EU-declaration of conformity (EN ISO / IEC 17050-1)
Hereby we: Authorized signature:
Address:
Eemweg 74
3755LD Eemnes
The Nederland
Declare under the sole
responsibility that the following
equipment:
Wireless Qi Clock
Brand:
FlinQ
Product name:
Wireless Qi Clock
Barcode / EAN:
8720168689726
Product Rating:
DC 5V 10W, or 9V 18W, Class III,
Battery CR2032 3V
Product type: Digital Clock
Production date: 2023
Produced in: China
Name: Erwin Honing
Title: CEO
Place: 3755LD Eemnes, The Netherlands
Date: 08-03-2023
Conform that the products mentioned are with the following safety and hazardous substances restrictions in electrical and electronic equipment requirements of the relevant European Union harmonization directives 2014/53/EU ( (EU) 2021/1196 ) 2011/65/EU + (EU)2015/863 and (EU)2017/2102 2012/19/EU 2019/1021 + (EU)2020/874 and (EU)2020/1204 94/62/EG + 2005/20/EC + (EU) 2018/852 2009/125/EC (EU)2019/1782 (EC) No 1907/2006 and all amendments. Conformity Is guaranteed by the CE symbol. This product has been tested following harmonized standards and EU community legislation specifications, applying versions will be valid in 03-2023 . The full text of the EU declaration of conformity is available at the following internet address: www.flinqproducts.nl
TECHNICAL CHANGES SUBJECT TO FURTHER DEVELOPMENTS
Radio Equipment Directive (RED) 2014/53/EU ( (EU) 2021/1196 ) Reduction of
Hazardous Substances (ROHS) Directive 2011/65/EU + (EU)2015/863 and
(EU)2017/2102
REACH Regulation (EC) No 1907/2006 and its amendments
Waste Electrical and Electronic Equipment (WEEE) Directive 2012/19/EU
Regulation on Persistent Organic Pollutants (POP/SCCP) (EU) 2019/1021 +
(EU)2020/874 and (EU)2020/1204
Product Safety Act PAH AfPS GS 2019:01 (PAK)
Packaging and Waste Directive 94/62/EG + 2005/20/EC + (EU) 2018/852 ECO Design
Directive 2009/125/EC Control Gears > (EU)2019/1782
EN 55032 : 2015/A11:2020
EN 55035 : 2017+A11:2020
EN IEC 61000-3-2:2019/A1:2021
EN 61000-3-3:2013/A1:2019
ETSI EN 303 417 V1.1.1 (2017-09)
ETSI EN 301 489-3 V2.3.2 (2023-01)
ETSI EN 301 489-1 V2.2.3 (2019-11)
EN IEC 62311:2020
EN IEC 62368-1:2020+A11:2020
IEC 62321-5:2013
IEC 62321-4:2013+AMD1:2017
IEC 62321-7-1:2015
IEC 62321-7-2:2015
IEC 62321-6:2015
IEC 62321-8:2017
IEC 62321-7-2:2017
(EC) No 1907/2006
(EU) 2019/1021
2012/19/EU
AfPS GS 2019:01 PAK
FlinQ Commerce
Eemweg 74
3755 LD Eemnes
The Netherlands
www.flinqproducts.nl
[email protected]
References
- FlinQ Products | Gratis verzending | 2 jaar garantie | Betaal later
- FlinQ Products | Gratis verzending | 2 jaar garantie | Betaal later