VALCOM VIP-998 SIP Strobe Alert User Manual

: June 12, 2024
: Valcom

Table of Contents

VALCOM VIP-998 SIP Strobe Alert
Product Information
Product Usage Instructions
INTRODUCTION
SPECIFICATIONS
Precautionary Designations
FCC Information
INSTALLATION
TECHNICAL ASSISTANCE
WARRANTY
Documents / Resources

VALCOM VIP-998 SIP Strobe Alert

Product Information

The VIP-998 SIP Strobe Alert is a private mode notification appliance that provides bright strobe functionality. It operates using power and activation provided by the IP network. The strobe alert is available in three different colored flashers: Amber, Blue, or White. It can be synchronized with multiple strobes to flash in unison.

Some key features of the VIP-998 SIP Strobe Alert include:

A cost-effective and versatile solution for applications requiring visual alerts or strobes
Power over Ethernet (PoE) 802.3af compatible
SIP Night Ring functionality when used with other Valcom IP speakers
Synchronized strobing when used with additional Valcom IP strobes
The dimensions of the VIP-998 are 5.5H x 5W x 2.0D inches (13.9cm H x 12.7cm W x 5.08cm D), and it weighs 0.62 lbs. (0.27 kg). The nominal power requirements for the device are 6W, which can be supplied via an 802.3af PoE Ethernet Switch.
The VIP-998 SIP Strobe Alert is designed for use with a UL Listed power source marked Class 2 or LPS-rated 24VDC or 48VDC (PoE). It should be used in an intra-building environment.
Please note the safety information provided in the user manual to ensure proper usage and precautions.

Product Usage Instructions

Connect the VIP-998 SIP Strobe Alert to an IP network using an Ethernet cable.
Ensure that the power source is a UL Listed Class 2 or LPS-rated 24VDC or 48VDC (PoE).
Place the strobe alert in a suitable location where it can be easily seen.
If synchronization with other Valcom IP strobes is desired, connect the additional strobes to the network and configure them accordingly.
To activate the strobe alert, use one of the following methods:
- Valcom Group Page: Initiate a group page using Valcom IP speakers to trigger the strobe alert.
- SIP Phone Call: Make a SIP phone call to the VIP-998 SIP Strobe
  Alert to activate the strobe functionality.
The strobe alert will flash in the selected color (Amber, Blue, or White) when activated.
To ensure safety, follow the provided safety instructions and precautions.
If servicing or maintenance is required, refer to qualified service personnel.

INTRODUCTION

The VIP-998 SIP Strobe Alert is a private mode notification appliance providing bright strobe functionality with both power and activation provided by the IP network.
The VIP-998 is available in three different colored flashers. Multiple strobes may be synchronized to flash in unison.

SPECIFICATIONS

Features

Cost effective and versatile solution to applications requiring visual alerts or strobes
Power over Ethernet (PoE) 802.3af compatible
SIP Night Ring functionality in conjunction with other Valcom IP speakers
Synchronized strobing when used with additional Valcom IP strobes
Available in Amber, Blue or White Flashers

Activation Methods

Valcom Group Page
SIP Phone Call

Dimensions / Weight

5.5″H x 5″W x 2.0″D (13.9cm H x 12.7cm W x 5.08cm D)
- 0.62 lbs. (0.27 kg)

Nominal Power Requirements

Via 802.3af PoE Ethernet Switch 6W

Environment

Temperature: 0 to +40° C
Humidity: 0 to 85% non-precipitating Suitable for indoor installation
These products are intended for use with a UL Listed power source marked “Class 2” or “LPS” rated 24VDC, or 48VDC (PoE). PoE and all interconnected ITE are intended for intra-building.

Precautionary Designations

WARNING-To Reduce The Risk Of Fire Or Electric Shock. Do Not Expose This Apparatus To Rain Or Moisture
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: To reduce the risk of electric shock,
Do not remove the cover (or back).
No user-serviceable parts inside. Refer servicing to qualified service personnel.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

FCC Information

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference in which case the user will be required to correct the interference at his own expense.

INSTALLATION

Operation
The VIP-998 provides a private mode notification via a network connection. Activation of the strobe is triggered by including the VIP-998 as a member of a Valcom IP Paging group. The VIP-998 can also operate as a visual Night Ring device in conjunction with a SIP PBX and can provide audio Night Ring to other Valcom IP speakers when activated. Interface to customer telephone system can be via SIP registration to a Voice over IP (VoIP) telephone system, or FXO port (when used with a Valcom Enhanced Station Port).
Mounting
The VIP-998 is designed for double-gang FD electrical box mounting. Verify depth of the electrical box is adequate for mounting the VIP-998. (See Figure 1) NOTE: The VIP-998 can synchronize with other Valcom IP strobes, but not with other manufacturers’ devices. Therefore, it must not be installed where the flash from other, non-Valcom IP strobes may be seen.
Power Connections
The only method of powering the VIP-998 is via a Power over Ethernet (PoE) switch or power injector meeting the 802.3af specification. Make all required signal connections before connecting to the Ethernet switch or power injector meeting the 802.3af specification.
Network Connection
The VIP-998 has one RJ-45 Network connector.
Green LED: (Link) Indicates Ethernet connection when illuminated.
Yellow LED: (Activity) Indicator flashes to indicate network activity.
Use a standard Ethernet patch cable to connect the NETWORK connector to an Ethernet switch.

Setup

Information specific to your application will need to be programmed into the VIP-998 using a computer. The PC used for programming should be connected to the same subnet as the VIP-998. Setup will be done using the IP Solution Setup Tool. Download the latest version of the free IP Solutions Setup Tool from the Valcom web site at www.valcom.com/vipsetuptool.

TECHNICAL ASSISTANCE

Assistance in troubleshooting is available from the factory. Call 540-563-2000 and press 1 for Technical Support or via email at support@valcom.com.
When requesting assistance, you should include all available information. General information and troubleshooting procedures are available on the Valcom website at www.valcom.com.
Valcom equipment is not field repairable.
Valcom, Inc. maintains service facilities in Roanoke, VA. Should repairs be necessary, attach a tag to the unit clearly stating your company name, address, phone number, contact person, and the nature of the problem. Send the unit to Valcom, Inc. Repair & Return Dept. 5614 Hollins Road Roanoke, Va. 24019-5056

WARRANTY

Warranty information may be found on our website at www.valcom.com/warranty

Documents / Resources

| VALCOM VIP-998 SIP Strobe Alert [pdf] User Manual
VIP-998 947590, VIP-998 SIP Strobe Alert, VIP-998, VIP-998 Strobe Alert, SIP Strobe Alert, Strobe Alert
---|---