SCANSTRUT APT-150-SL-01 Starlink Mount for Boats Installation Guide
- June 16, 2024
- SCANSTRUT
Table of Contents
SCANSTRUT APT-150-SL-01 Starlink Mount for Boats
Product Information
Specifications:
- Model: APT-150-SL-01
- Issue Date: 03-01-2024 (Issue 1)
Parts List:
- Foam Seal x1 (Part No: 60402)
- DS30 Shell x1 (Part No: 64015)
- DS30 Bungs x2 (Part No: 6004972)
- M4 x 10 Bolt x4 (Part No: 6004970)
- M8 Nyon Shoulder Washer x8 (Part No: 101816)
- A4 Stainless Steel Washer x4
- 1/4 x 5/8 Cap Head Screws x4
- Blanking Plug x1 (Not Supplied)
Tools Required:
- No.1 Pozi Drive Screwdriver
- Power Drill
- 3/16 Allen Key
- Thread Lock
Recommended Cable Routing:
Pass the smaller connector through the cable seal until the length is at
least 600mm (23.6 inches).
Waterproof Cable Routing:
For routing a number of cables, it is recommended to use a starlink cable
length of at least +1.5mm above 600mm (23.6 inches).
Contact Information
- UK & International: +44 (0)1392531280, sales@scanstrut.com
- Scanstrut Ltd Dart Business Park, Clyst St. George, Exeter EX3 0QH, UK
- USA: +1 860 308 1416, usasales@scanstrut.com
- Scanstrut Inc. 7 Pequot Park Road, Westbrook, CT 06498, USA
For further installation and warranty information, please visit:
www.scanstrut.com
Product Usage Instructions
Installation Instructions:
- Ensure you have all the required parts listed above.
- Using the No.1 Pozi Drive Screwdriver, attach the Foam Seal (Part No: 60402) to the DS30 Shell (Part No: 64015).
- Insert the DS30 Bungs (Part No: 6004972) into the DS30 Shell.
- Secure the DS30 Shell onto the desired surface using the M4 x 10 Bolts (Part No: 6004970) and the M8 Nyon Shoulder Washers (Part No: 101816). Use suitable fastenings.
- If using the optional light bar APT-LB-01 (Part No: 19021), follow the additional instructions provided.
- Regularly inspect the installation and assembly for any damage or loose parts.
Important Notes:
- Any use of unapproved products or overloading the Power Towers invalidates the product warranty.
- Scanstrut does not supply fastenings to fix the product to the chosen surface. Please choose suitable fastenings for this purpose.
- No liability is accepted for damage caused by incorrect installation.
- The product has been designed specifically for the mounting of approved marine electronics under normal boating conditions.
FAQ
-
Q: What tools are required for installation?
A: The installation requires a No.1 Pozi Drive Screwdriver, a Power Drill, a 3/16 Allen Key, and Thread Lock. -
Q: Can I use unapproved products with the Power Towers?
A: No, using unapproved products will invalidate the product warranty. -
Q: Are the fastenings included in the package?
A: No, Scanstrut does not supply fastenings to fix the product to the chosen surface. Please choose suitable fastenings for this purpose. -
Q: Where can I find further installation and warranty information?
-
A: You can visit the website www.scanstrut.com for further installation and warranty information.
APT-150-SL-01
03-01-2024 (Issue 1)
Installation Instructions
Parts List
Parts Required
Tools Required
Waterproof Cable Routing
Use the ø8.5mm bung supplied for routing the Starlink cable. For routing a number of cables.
Recommended Starlink Cable Length
Pass smaller connector through the cable seal until the length is at least 600m (23.6”).
IMPORTANT
- Power Towers are only compatible with marine electronics devices as stated in the latest Scanstrut Product Guide – subject to change without prior notice.
- Use of the Power Towers with unapproved products, or overloading, invalidates any product warranty.
- Scanstrut does not supply fastenings to fix this product to the chosen surface. Please choose suitable fastenings for this purpose. No liability is accepted for damage caused by incorrect installation.
- The installation and assembly must be regularly inspected for evidence of damage or loose parts.
- Product has been designed specifically for the mounting of approved marine electronics under normal boating conditions.
UK & International
- +44 (0)1392531280 sales@scanstrut.com
- Scanstrut Ltd
- Dart Business Park, Clyst St. George, Exeter
- EX3 0QH, UK
For further installation and warranty information please visit: www.scanstrut.com
USA
- +1 860 308 1416
- usasales@scanstrut.com Scanstrut Inc.
- 7 Pequot Park Road Westbrook, CT
- 06498, USA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>