RUGGED RIDGE JL-JLU Spartan Front Bumper Standard Ends User Guide
- June 13, 2024
- RUGGED RIDGE
Table of Contents
**RUGGED RIDGE JL-JLU Spartan Front Bumper Standard Ends User Guide
**
Components
-
Winch Plate
-
Spartan Front Bumper
-
D-Shackle Tab
-
M12 Bolt
-
M12 Washer
-
M12 Lock Nut
-
M12 Nut Plate
-
M10 Bolt
-
M10 Washer
-
M8 Bolt
-
M8 Washer
-
M8 Nut Plate
-
M4 Bolt
-
M4 Washer
-
M4 Nut
-
Fog Light Adapter – Left
-
Fog Light Adapter – Right
-
Fog Light Adapter – Washer
-
Badge Logo
Product Using Instructions:
-
Remove the original equipment (OE) front bumper and inner frame horn support brackets.
-
Loosely install the Winch Plate to the inside of the frame using the supplied M10 hardware.
-
If installing Sport model fog lights, remove the black plastic mounting bracket from the light by depressing the tabs on the light housing. Replace the mounting bracket with the supplied Fog Light Adapter components as shown.
-
Install the fog lights using the supplied M4 hardware.
-
Loosely install the Spartan Front Bumper and D-Shackle Tabs using the supplied M12 hardware. The M12 Nut Plates are designed to mount behind the Winch Plate.
-
Fasten the Spartan Front Bumper to the Winch Plate using the supplied M8 hardware. Tighten all fasteners and reconnect fog lights.
-
Fill the holes for the Spartan Overrider (part number 11548.44) using the supplied M8 hardware and nut plates.
-
If desired, apply the Badge Logo above the passenger side D-Shackle Tab.
OMIX-ADA®
TECHNICAL SUPPORT
PHONE: M-F 8am – 5pm EST
1-800-449-6649
FOR WARRANTY OR TECH CONCERNS EMAIL:
webmaster@omixsupport.com
460 HORIZON DR. SUITE 400 | SUWANEE, GA 30024 | PHONE:
770-614-6101 | FAX:
844-270-0593 | www.Omix-
ADA.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>