Camry CR 6018 Mini Oven User Manual

: June 9, 2024
: camry

Table of Contents

Camry CR 6018 Mini Oven
Product Information
Product Usage Instructions
DESCRIPTION
BEFORE SWITCHING ON
USING THE DEVICE
USING ROTARY SPIT
GRILLING
CLEANING AND MAINTENANCE
TECHNICAL DATA
PRODUCT AVAILABLE
AFTER-SALE SERVICE NOTICE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Camry CR 6018 Mini Oven

Product Information

The CR 6018 is an electric oven with a 35 L capacity and a power rating of 1500W (maximum power of 2200W). It comes with a temperature adjustment knob, heating mode selection knob, timer, indicator lamp, baking tray, rotary spit axis, spit removal handle, handle for opening the glass door, grill, tray removal handle, and spit jaws. It is designed to be placed on a high- temperature resistant base and requires a minimum of 10cm ventilation space on each side and 30cm above the oven to operate safely. The device should be kept dry and not covered during operation.

Product Usage Instructions

Place the oven on a high-temperature-resistant base and ensure there is enough ventilation space around the oven.
Ensure the oven is dry.
Set the temperature adjustment knob (1) to the desired value.
Set the heating mode selection knob (2) to the desired position:
- Both upper and lower + fan
- Upper + fan
- Both upper and lower
- Upper + rotary spit
- Both upper and lower + fan+rotary spit
Set the timer (4) to the required baking time. A bell will ring upon reaching the required baking time.
To switch off the device before the time has run out, rotate the heating mode selection knob (2) to OFF.
Always unplug the power cable from the power outlet after use.
Dispose of carton boxes and plastic bags in corresponding waste bins to protect the environment. Used appliances should be delivered to dedicated collecting points due to hazardous components that may affect the environment. Electrical appliances must be returned to reduce their reuse and utilization. If the device contains batteries, they should be delivered to dedicated points separately.

SAFETY CONDITIONS IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different if the device is used for commercial purposes.

Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.
The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.
The applicable voltage is 220-240V, -50/60Hz. For safety reasons, it is not appropriate to connect multiple devices to one power outlet.
Please be cautious when using it around children. Do not let the children play with the product. Do not let children or people who do not know the device to use it without supervision.
WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children unless they are over 8 vears of age and these activities are carried out under supervision.
After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!
Never put the power cable, the plug or the whole device into the water. Never expose the product to atmospheric conditions such as direct sunlight or rain, etc.. Never use the product in humid conditions.
Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defective product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.
Never put the product on or close to hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.
Never use the product close to combustibles.
Do not let the cord hang over edge of a counter or touch hot surfaces.
Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.
In order to provide additional protection, it is recommended to install a residue current device (RCD) in the power circuit, with a residual current rating not more than 30 mA. Contact professional electrician in this matter.
Do not allow moisture to the motor unit.
If it is necessary to use an extension cord, use only a grounding pin and adapted to a current of min 10 A. The other extension cords may overheat. The cable must be positioned so as to avoid accidental strokes or stumbles on him.
The oven should be put on a flat, temperature-resistant surface away from flammable materials (curtains, drapes, wallpaper, etc.). In order to ensure proper air circulation there should be at least 10 cm of free space on each side of the unit and at least 30 cm above the oven. Do not cover the ventilation holes of the oven, as this may cause overheating and damage.
Do not use the oven with the door open. Do not cover the machine during operation, nor put any items.
Do not touch the hot surfaces of the oven (door, top or bottom wall and side walls. Use protective gloves to remove or touch any hot parts.
During operation, door glass becomes extremely hot. It must not be heavily hit, or pour cold water because of the risk of its crack.
The power cord can be installed over an oven, and should not touch or be near hot surfaces. Do not place the oven under the electrical outlet
Due to the high temperature keep special carefulness when removing tray or grate or other accessories approved for use in ovens) with baked dishes. Please be careful, when removing the tray or hot oil or other hot liquids. Use dedicated accessories offered with the oven or heat-resistant oven gloves.
Oversized food must not be inserted, as this may cause fire and damage the appliance.
Do not place any cardboard, paper, plastics and other flammable or easily melt objects in\ the oven.
Do not store any other accessories in the appliance.
After cooking and before cleaning the machine, unplug the power cord from the outlet and leave to cool. Wait a long period of time because the heated oven cools very slowly.
Clean the device after each use.
Do not use corrosive detergents such as emulsions, creams, pastes, etc. to clean the casing. They can wipe off the graphic signs on the surface such as scales, marks, warning signs etc.
Do not wash metal parts in the dishwasher, as the corrosive detergents used in these devices cause darkening of the above parts. It is recommended to wash them by hand, using traditional dishwashing liquids.
To avoid overheating of the oven the crumb tray or any other part of the oven should not be cover with a metal foil.
Do not use metal scouring pads to clean. Broken metal pieces may come into contact with electrical parts, creating a risk of electric shock.

DESCRIPTION

Camry-CR-6018-Mini-Oven-FIG-1

Temperature adjustment knob
Housing
Indicator lamp
Baking tray
Rotary spit axis
Spit removal handle
Heating mode selection knob (a,b,c,de) / power button
Timer
Handle for opening glass door
Grill
Tray removal handle
Spit jaws (2 pairs)

BEFORE SWITCHING ON

Make sure the oven is placed on high-temperature resistant base
Make sure there Is enough ventilation space around oven (minimum 10 cm on each side and 30 cm above the oven)
Make sure the oven is dry

USING THE DEVICE

Set temperature adjustment knob (1) to the desired value.
Set the heating mode selection knob (2) in position:
- Both upper and lower + fan
- Upper + rotary spit
- Upper +fan
- Both upper and lower
- Both upper and lower + fan+rotary spit
Set timer (4) to required baking time. A bell is rung upon reaching required baking time. on reaching I
In order to switch the device off before the time has run out, rotate heating mode selection knob (2) knob to “OFF”.
Always unplug the power cable from the power outlet after use.

USING ROTARY SPIT

Put one pair of jaws on the axis sharp side, then slide onto the axis.
Impale such prepared spit (9) into the center part of the product to be baked, stick the spit jaws (12) in the product.
Put in second pair of jaws according to point 1 and 2, and stick them from other side, “closing” the product on the spit axis.
Check that the fixed product is located centrally along spit axis.
Place the square end of the spit in the spit drive coupling on the right-hand side of oven heating chamber, and place sharp end in the bearing on left-hand side.
Set temperature adjustment knob (1) to the desired value (for example 200°C)
Turn the oven on using theating mode selection knob (2), Set the desired baking time (4), the lamp (5) will illuminate.
After the baking time runs out, switch the oven off by rotating the heating mode selection knob (4) to “OFF”. Always unplug the power cable from the power outlet after use.
Before removing product baked on spit, wait a moment to allow the device to cool. Then grab the spit axis using spit removal handle (11). First raise left side, and slide to the left, so that right axle end leaves the drive coupling. Then, carefully remove baked meal from the oven.

GRILLING

Open oven door.
Place grill (8) in the oven, place products to be grilled on the grill, and close the oven door.
Set the heating mode selection knob (2b)
Set temperature adjustment knob (1) to 230.°C
Set the desired baking time with the knob (4).
After the baking, switch the oven off by rotating theating mode selection knob (4) to “OFF”, and remove the power plug from the power socket.
Wait a moment, nad remove grill with baked products carefully using special heat-resistant gloves.

CLEANING AND MAINTENANCE

Before cleaning of the oven switch it off and leave to cool.
Disconnect the device from power source by removing power plug from the power socket.
Do not immerse the oven in water.
Clean the casing with moist cloth, and then wipe dry.
Clean the tray and grill in water with washing-up liquid. Wipe dry using cloth.
Clean the glass door with moist cloth or sponge soaked with water and washing-up liquid. Then wipe dry.
Do not use sharp metal tools to clean the residues of baked products

TECHNICAL DATA

Power supply: 220-240V ~50/60Hz
Timer: 60 min.
Power Nom.: 1500W
Power Max: 2200W
Capacity: 35 L

To protect your environment: please separate carton boxes and plastic bags and dispose of them in corresponding waste bins. Used appliances should be delivered to the dedicated collecting points due to hazardous components, which may effect the environment. The electrical appliance must be returned in order to reduce its reuse and utilization. If the device contains batteries they should be delivered to dedicated points separately.