DEFINITIVE TECHNOLOGY BP9000 Series Atmos Enabled Speakers Owner’s Manual
- June 9, 2024
- DEFINITIVE TECHNOLOGY
Table of Contents
DEFINITIVE TECHNOLOGY BP9000 Series Atmos Enabled Speakers Owner’s Manual
DEFINITIVE TECHNOLOGY
WHAT OBSESSION SOUNDS LIKE™
Thank you for choosing the Definitive Technology BP9000 loudspeaker system. The BP9000 range offers the most cutting-edge audio technologies, including Forward-Focused Bipolar array technology, integrated powered subwoofers, Intelligent Bass Control™ and Dolby Atmos® and DTS: X™ compatibility. This extraordinary speaker is truly state-of-the-art in both music and home theater sound reproduction. We expect you will enjoy the full-range sonic signature of Definitive Technology.
Our engineers have spent many years developing this product. In order to
ensure
that you experience the finest performance possible, we encourage you to take
a moment to fully read this owner’s manual and familiarize yourself with the
proper installation and set-up procedures for your BP9000 speakers.
SAFETY PRECAUTIONS
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION! To reduce the risk of electric shock and fire, do not remove the
cover or back plate of this device. There are no user serviceable parts
inside. Please refer all servicing to licensed service technicians. Avis:
Risque de choc electricque, ne pas ouvrir.
CAUTION! The international symbol of a lightning bolt inside of a
triangle is intended to alert the user to uninsulated “dangerous voltage”
within the device’s enclosure. The international symbol of an exclamation
point inside of a triangle is intended to alert the user to the presence of
important operating, maintenance and servicing information in the manual
accompanying the device.
CAUTION! To prevent electrical shock, match wide blade of plug to wide
slot, fully insert.
CAUTION! To reduce the risk of electrical shock, do not expose this
equipment to rain or moisture.
- READ INSTRUCTIONS: All safety and operating instructions should be read before operating the device.
- RETAIN INSTRUCTIONS: The safety and operating instructions should be retained for future reference.
- HEED WARNINGS: All warnings on the device and in the operating instructions should be adhered to.
- FOLLOW INSTRUCTIONS: All operating and safety instructions should be followed.
- WATER & MOISTURE: The device should never be used in, on or near water for risk of fatal shock.
- VENTILATION: The device should always be located in such a way that it maintains proper ventilation. It should never be placed in a built-in installation or anywhere that may impede the flow of air through its heat sink.
- HEAT: Never locate the device near heat sources such as radiators, floor registers, stoves or other heat-generating devices.
- POWER SUPPLY: The device should only be connected to a power supply of the type described in the operating instructions or as marked on the device.
- POWER CORD PROTECTION: Power cables should be routed so they are not likely to be stepped on or crushed by items placed on them or against them. Special attention should be paid to areas where the plug enters a socket or fused strip and where the cord exits the device.
- CLEANING: The device should be cleaned in accordance with manufacturer’s instructions. We recommend using a lint roller or household duster for the grille cloth.
- PERIODS OF NON-USE: The device should be unplugged when not being used for extended periods of time.
- DANGEROUS ENTRY: Care should be taken that no foreign objects or liquids fall or are spilled inside the device.
- DAMAGE REQUIRING SERVICE: The device should be serviced by licensed technicians when:
- The plug or power supply cord has been damaged.
- Objects have fallen on or liquid has spilled inside the device.
- The device has been exposed to moisture.
- The device does not appear to be operating properly or exhibits a marked change in performance.
- The device has been dropped or the cabinet becomes damaged.
- SERVICE: The device should always be serviced by licensed technicians. Only replacement parts specified by the manufacturer should be used. The use of unauthorized substitutions may result in fire, shock, or other hazards.
CAUTION: IMPORTANT SAFETY INSTRUCTIONS
WARNING: DO NOT OPERATE SPEAKER WITHOUT STABILIZER BASE INSTALLED
Power Supply
- The fuse and power disconnect device are located on the back of the speaker.
- The disconnect device is the power cord, detachable at either the speaker or the wall.
- The power cord must be disconnected from the speaker before servicing.
This symbol on our electrical products or their packaging indicates that it is forbidden in Europe to discard the product in question as domestic waste. In order to ensure that you dispose of the products correctly, please dispose of the products according to local laws and regulation son the disposal of electrical and electronic equipment. In doing so you are contributing to the retention of natural resources and to the promotion of environmental protection by the treatment and disposal of electronic waste.
We’re delighted that you’re part of our Definitive Technology family.
Please take a few minutes to register your product* so we have a complete
record of your purchase. Doing so helps us serve you the best we can now and
in the future. It also lets us contact you for any service or warranty alerts
(if required).
Register here: http://www.definitivetechnology.com/registration No internet?
Call Customer Service
M-F 9:30 a.m. – 6 p.m. US ET
at 800-228-7148 (US & Canada), 01
410-363-7148 (all other countries)
Note: the data we gather during online registration is never sold or
distributed to third parties.
Serial number can be found at the back of the manual
Unpacking Your BP9000 Speakers
Please unpack your system carefully. We recommend saving all cartons and packing materials in case you move or need to ship your system. It is important to save this booklet, as it contains the serial number for your product. You can also find the serial number on the back of your BP9000 speaker. Each loudspeaker leaves our factory in perfect condition. Any visible or concealed damage most likely occurred in handling after it left our factory. If you discover any shipping damage, please report this to your Definitive Technology dealer or the company that delivered your loudspeakers.
Accessories Included in Your BP9000 Accessory Kit
- Aluminum stabilizer base: Qty (1) all models
- Phillips head screws: Qty (4) all models
- Screw locks for spikes/glides: Qty (4)
- Hard floor glides (for solid floor surfaces like hardwood or cement): Qty (4) all models
- Carpet spikes (for carpet floors): Qty (4) all models
- Power cord: Qty (1) all US models; Qty (2) all EU and UK models
FIGURE 1 | Base Installation
Definitive Technology is not responsible for damage to floors caused by misuse of the provided accessories.
Positioning the Speakers in Your Room
Your BP9000 speakers are very flexible in terms of positioning and placement. To optimize their performance, please follow these simple guidelines. Although the following recommendations will usually yield the best results, all rooms and listening setups are different, so do not be afraid to experiment with the speaker placement. Whatever sounds best to you is likely correct.
We recommend setting up the speakers and listening position in an equilateral
triangle as illustrated in Figure 2. You will also get good results if
the listeners are a bit farther away. For example, if line A and C are
each 10′ long then line B could be between 7′ and 10′ wide. The BP9000
speakers offer bipolar sound, meaning they will reflect sound off the back and
side walls to create an incredibly broad and engaging soundstage no matter
where you sit. As such, we recommend placing your BP9000 speakers at least 4”
away from your back wall to maximize this feature. Toeing the speakers in
slightly, if possible, toward your viewing area will also provide a stronger
center image. Once you’ve found the right location, feel free to contact
Definitive Technology or your place of purchase for additional guidance on
speaker positioning.
FIGURE 2 | Positioning BP9000 as Left/Right
Connecting Your Loudspeakers
STRIP 1/4″ (6MM) WIRE
- IDENTIFY MARKINGS ON WIRE AND ASSIGN +/–
- APPLY BANANA PLUGS OR SPADES AT THIS POINT IF APPLICABLE.
- UNSCREW BOTTOM SET OF BINDING POST AND CONNECT WIRE
- TIGHTEN UNTIL SECURE
ENSURE THAT THE SPEAKER IS ALWAYS CONNECTED TO THE RECEIVER OR AMPLIFIER +
TO + AND – TO –
Connection Options: Speaker-Level Only or Speaker-Level + LFE w/ “Y” Connector
Use the manual speaker setup functions in your receiver or processor to set speaker configuration, speaker distance and channel balance. Consult your receiver/processor manual to learn how to access and use the setup menus. We recommend that you use the settings called for in Figure 4/5 .
Note: We recommend that you do not use your receiver’s auto setup functions as they can be ineffective in setting up and adjusting speakers with integrated powered subwoofers..
Connection Option 1: Speaker-Level Only (recommended)
Option 1 offers an incredibly precise, fullrange sound. The internal cross-
over network distributes all frequenciesto their intended drivers, and the
integrated powered subwoofer works harmoniously with the midrange array.
Directions:
- Connect speaker wire from receiver/amplifier to speaker level input on theback of the speaker
- Adjust receiver/processor settings to: Speaker (Large); Subwoofer (No)
FIGURE 4 – Speaker Level Only Connection Diagram
Important: Setting subwoofer to no simply means NO additional subwoofer is needed.
Connection Option 2: Speaker-Level + LFE with “Y” Connector
For additional advanced connection methods, please visit the Definitive Technology website or give us a call.
FIGURE 5 – Speaker-Level + LFE with “Y” Connection Diagram
For those who demand greater customization, Option 2 gives you the ability
to control the amount of low frequencies (those below the crossover point set
in your receiver/processor) sent to the subwoofer. Should you prefer Option 2,
we highly recommend setting the crossover point in your receiver/processor to
80Hz or below to avoid disturbing the delicate blending between the subwoofer
and midrange. In addition, careful balance between the subwoofer output level
of your receiver and the bass control on the back of your speaker should be
considered. We recommend starting with the bass control at 12 o’clock. (as
shown in Figure 5).
Directions
- Connect speaker wire from receiver/amplifier to speaker level input
- Connect RCA Y-Cable from LFE or Sub-out of receiver/processor to LFE input on both Left and Right BP9000 speakers
- Adjust receiver or processor settings to: Speaker (Small); Subwoofer (Yes)
Powering the Active Subwoofer
Your BP9000 speakers contain built-in powered subwoofers that must be plugged
into an electrical socket. The BP9000 has a signal detection feature that only
turns the amplifier on when a signal is present. The LED on the back will turn
from Red to Blue when a signal is sensed. The “D.” LED logo on the front will
also turn on if enabled (see Definitive Technology “D.” LED Logo section for
more information). After the cessation of a signal, it may take up to 20
minutes for the amplifier to standby. Do not be concerned, the amplifiers draw
little power when they are idle.
Intelligent Bass Control ™
Definitive Technology has long believed that the best loudspeaker is one that
reproduces the full-range audio signal as precisely as possible. Our sonic
signature allows you to not just hear what is on the screen, but to feel it as
well. Intelligent Bass Control ™ is our latest advancement that gives you the
ability to modulate deep bass up or down in level while simultaneously
maintaining optimal mid-range clarity regardless of where the bass control is
set. Simply rotate the dial on the back of the loudspeaker to your preferred
bass setting and the speaker will do the rest of the work. That’s it. We
recommend starting at the mid-point and adjust to your preference from there.
For advanced instructions on Intelligent Bass Control ™ including integrating with room correction software (ex. Audyssey), please visit our website or give us a call.
Dolby Atmos® and DTS:X® Compatibility
All BP9000 floor speakers offer Dolby Atmos or DTS:X compatibility. The
BP9080x integrates a height speaker module into the loudspeaker, whereas the
BP9060, BP9040, and BP9020 offer a hidden, dedicated connector port (fits A90
speaker module— sold separately) that can be accessed by gently pushing down
on the back of the magnetically-sealed, acoustically-treated aluminum top
panel. Regardless of your setup, simply run additional speaker wire to the
height channel binding posts on the back of the loudspeaker from any Dolby
Atmos or DTS:X compatible set-up.
A90 Placement diagram
Definitive Technology “D.” LED Logo
To highlight the integrated powered subwoofers, you will note an LED logo at
the bottom front panel of each BP9000 tower speaker. This logo will default to
“on” but can be completely disabled by simply pressing the LED ON/OFF button
on the back of the loudspeaker. When enabled, the LED logo will engage only
once it’s receiving an active signal from your receiver/processor. It will
automatically turn off/standby after 20 minutes of no active signal.
Complete Home Theater System
We strongly suggest that you use the timbre-matched BP9000 Definitive
Technology center channel and rear/ surround speakers to complete your home
theater system. Please note that you can use Definitive Technology towers as
rear or side surround speakers with excellent results for both music and
movies.
Technical Assistance
It is our pleasure to offer assistance if you have any questions regarding
your BP9000 or its setup. Please contact your nearest Definitive Technology
dealer or call us directly at
800-228-7148 (US & Canada), 01
410-363-7148 (all other countries) or
e-mail info@definitivetech.com. Technical support is offered in English only.
SPECIFICATIONS | BP9020 | BP9040 | BP9060 | BP9080x |
---|---|---|---|---|
MENSIONS (CABINET ONLY, NO BASE) | 34.75″ H x 6″ W x 13″ D (88.3cm H x 15.3 cm | |||
W x 33 cm D) | 38.25″ H x 6″ W x 13″ D (97.0 cm H x 15.3 cm W x 33 cm D) | |||
43.75″ H x 6″ W x 13″ D (111.1cm H x 15.3 cm W x 33 cm D) | 50.5″ H x 7″ W x |
16″ D (128.7cm H x 17.8 cm W x 40.6 cm D)
DIMENSIONS (WITH BASE)| 35.5″ H x 11″ W x 13″ D (88.3cm H x 27.9 cm W x 33 cm
D)| 39″ H x 11″ W x 13″ D (99.0cm H x 27.9 cm W x 33 cm D)| 44.5″ H x 11″ W x
13″ D (113.1cm H x 15.3 cm W x 33 cm D)| 51.5″ H x 12″ W x 16″ D (130.8cm H x
30.5 cm W x 40.6 cm D)
PRODUCT WEIGHT| 30 lbs| 36 lbs.| 50 lbs.| 62 lbs
FRONT ARRAY DRIVER COMPLEMENT| (2) 3.5″ (8.9 cm) drivers, (1) 1″ (2.5 cm)
aluminum dome tweeter| (2) 4.5″ (11.4 cm) drivers, (1) 1″ (2.5 cm) aluminum
dome tweeter| (2) 4.5″ (11.4 cm) drivers, (1) 1″ (2.5 cm) aluminum dome
tweeter| (2) 5.25″ (13.3 cm) drivers, (1) 1″ (2.5 cm) aluminum dome tweeter
REAR ARRAY DRIVER COMPLEMENT| 1) 3.5″ (8.9 cm) drive| (1) 4.5″ (11.4 cm)
driver, (1) 1″ (2.5 cm) aluminum dome tweeter| (1) 4.5″ (11.4 cm) driver, (1)
1″ (2.5 cm) aluminum dome twe| (2) 5.25″ (13.3 cm) drivers, (1) 1″ (2.5 cm)
aluminum dome tweeter
SUBWOOFER SYSTEM DRIVER COMPLEMENT| (1) 8″ (20.3 cm) woofer| (1) 8″ (20.3 cm)
woofer, (2) 8″ (20.3 cm) bass radiators| 1) 10″ (25.4 cm) woofer, (2) 10″
(25.4 cm) bass radiators| (1) 12″ (30.5 cm) woofer, (2) 12″ (30.5 cm) bass
radiators
FREQUENCY RESPONSE| 28Hz-40kHz| 22Hz-40kHz| 18Hz-40kHz| 16Hz-40kHz
SENSITIVITY| 92dBSPL| 92dBSPL| 92dBSPL| 92dBSPL
IMPEDENCE| 8 ohms| 8 ohms| 8 ohms| 8 ohms
RECOMMENDED INPUT POWER| 50-200W| 50-300W| 50-300W| 50-300W
NOMINAL POWER (1% THD, 5SEC.)| 150W| 300W| 300W| 455W
EVELATION MODULE DRIVER COMPLEMENT| none| none| none| (1) 5.25″ (13.3 cm)
drivers, (1)1″ (2.5 cm) aluminum dome tweeters
Troubleshooting
If you experience any difficulties with your BP9000 speakers, try the suggestions below. If you still have problems, contact your Definitive Technology Authorized Dealer for assistance.
- Audible distortion when the speakers are playing at loud levels is caused by turning up your receiver or amplifier louder than the receiver or the speakers are capable of playing. Most receivers and amplifiers put out their full-rated power well before the volume control is turned all the way up, so the position of the volume control is a poor indicator of its power limit. If your speakers distort when you play them loud, turn the volume down!
- If you experience a lack of bass, it is likely that one speaker is out of phase (polarity) with the other and needs to be rewired with closer attention to connecting positive to positive and negative to negative on both channels. Most speaker wire has some indicator (such as color-coding, ribbing or writing) on one of the two conductors to help you maintain consistency. It is essential to connect both speakers to the amplifier in the same way (in phase). You may also experience lack of bass if the bass volume knob is turned down or not on.
- Make sure all your system interconnects and power cords are solidly in place.
- Should you hear hum or noise coming from your speakers, try plugging the speakers’ power cords into a different AC circuit.
- The system has sophisticated internal protection circuitry. If for some reason the protection circuitry trips, turn off your system and wait five minutes before trying the system again. If the speakers’ built-in amplifier should overheat, the system will turn off until the amplifier cools down and resets.
- Check to be sure that your power cord has not been damaged.
- Check that no foreign objects or liquid has entered the speaker cabinet.
- If you cannot get the subwoofer driver to turn on or if no sound comes out and you are sure the system is set up properly, please bring the loudspeaker to your Definitive Technology Authorized Dealer for assistance; call first.
Service
Service and warranty work on your Definitive loudspeakers will normally be
performed by your local Definitive Technology dealer. If, however, you wish to
return the speaker to us, please contact us first, describing the problem and
requesting authorization as well as the location of the nearest factory
service center. Please note that the address given in this booklet is the
address of our offices only. Under no circumstances should loudspeakers
beshipped to our offices or returned without contacting us first and obtaining
return authorization.
Definitive Technology Offices
1 Viper Way, Vista, CA 92081
Phone: 800-228-7148 (US & Canada), 01
410-363-7148 (all other countries)
Limited Warranty
5-Years for Drivers and Cabinets, 3-Years for Electronic Components
DEI Sales Co., dba Definitive Technology (herein “Definitive”) warrants to
the original retail purchaser only that this Definitive loudspeaker product
(the “Product”) will be free from defects in material and workmanship for a
period of five (5) years covering the drivers and cabinets, and three (3)
years for the electronic components from the date of the original purchase
from a Definitive Authorized Dealer. If the Product is defective in material
or workmanship, Definitive or its Authorized Dealer will, at its option,
repair or replace the warranted product at no additional charge, except as set
forth below. All replaced parts and Product(s) become the property of
Definitive. Product that is repaired or replaced under this warranty will be
returned to you, within a reasonable time, freight collect. This warranty is
non-transferrable and is automatically void if the original purchaser sells or
otherwise transfers the Product to any other party
This Warranty does not include service or parts to repair damage caused by
accident, misuse, abuse, negligence, inadequate packing or shipping
procedures, commercial use, voltage in excess of the rated maximum of the
unit, cosmetic appearance of cabinetry not directly attributable to defects in
material or workmanship. This warranty does not cover the elimination of
externally generated static or noise, or the correction of antenna problems or
weak reception. This warranty does not cover labor costs or damage to the
Product caused by
installation or removal of the Product. Definitive Technology makes no
warranty with respect to its products purchased from dealers or outlets other
than Definitive Technology Authorized Dealer.
THE WARRANTY IS AUTOMATICALLY VOID IF:
- The product has been damaged, altered in any way, mishandled during transportation, or tampered with.
- The product is damaged due to accident, fire, flood, unreasonable use, misuse, abuse, customer applied cleaners, failure to observe manufacturers warnings, neglect or related events.
- Repair or modification of the Product has not been made or authorized by Definitive Technology.
- The product has been improperly installed or used.
Product must be returned (insured and prepaid), together with the original dated proof of purchase to the Authorized Dealer from whom the Product was purchased, or to the nearest Definitive factory service center. Product must be shipped in the original shipping container or its equivalent. Definitive is not responsible or liable for loss or damage to Product in transit.
THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY THAT APPLIES TO YOUR PRODUCT. DEFINITIVE NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH YOUR PRODUCT OR THIS WARRANTY. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS, IMPLIED,WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED AND DISCLAIMED TO THE MAXIMUM EXTENT ALLOWED BY LAW. ALL IMPLIED WARRANTIES ON PRODUCT ARE LIMITED TO THE DURATION OF THIS EXPRESSED WARRANTY. DEFINITIVE HAS NO LIABILITY FOR ACTS OF THIRD PARTIES. DEFINITIVE’S LIABILITY, WHETHER BASED ON CONTRACT, TORT, STRICT LIABILITY, OR ANY OTHER THEORY, SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT FOR WHICH A CLAIM HAS BEEN MADE. UNDER NO CIRCUMSTANCE WILL DEFINITIVE BEAR ANY LIABILITY FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. THE CONSUMER AGREES AND CONSENTS THAT ALL DISPUTES BETWEEN THE CONSUMER AND DEFINITIVE SHALL BE RESOLVED IN ACCORDANCE WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALIFORNIA. DEFINITIVE RESERVES THE RIGHT TO MODIFY THIS WARRANTY STATEMENT AT ANY TIME.
Some states do not allow the exclusion or limitation of consequential or incidental damages, or implied warranties, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.