TOUGH LEADS 13A Plug-in Timers User Manual

TOUGH LEADS 13A Plug-in Timers

Product Information

13A and 16A Plug-in Timers

Specification

• Voltage: 230-250v
• Switching current: 16A & 32A Units
• IP rating Accuracy: 40A (AC-7a) resistive, 15A (AC-7b) inductive
• Back up: 415v
• Max on/off timings: 63A (AC-7a) resistive, 20A (AC-7b) inductive
• Minimum interval between on/off times: Not specified

Operating Instructions

Setting the time

1. Press and hold the button.
2. Press D+ to select the date.
3. Press H+ to select the hour.
4. Press M+ to select the minute.
5. When the date and time have been entered, release the button.

Changing between 12hr/24hr format:

1. Press the button for 3 secs to alternate between the 12 and 24 hour time format.

Setting a time interval

1. Press the P button repeatedly to reach the timing setting required. There are 16 programmable time periods, numbered 1 to 16.
2. The ON time is shown first. Pressing the P button again shows the OFF time.
3. Where no time is currently programmed, the display will show – : – -\\0
4. When you reach the time setting required:
   • Press D+ to select the date. Single days of the week and groups of days are available.
   • Press H+ to select the hour.
   • Press M+ to select the minute.

Override Factory setting reset

1. To clear a time, scroll to the required interval time and then press the MANUAL button.
2. Press the MANUAL button to alternate between permanently off, permanently on, and automated (controlled by the timer).
3. Press the RESET button.

40A (AC-7a) resistive, 15A (AC-7b) inductive 415v 16A & 32A Units
**63A (AC-7a) resistive, 20A (AC-7b) inductiveDouble pole switched contacts
IP rating| Timer enclosure IP55 (when front cover is closed) CEE 60309 connectors – IP44
Accuracy| ≤ 1 sec/day at 25°C
Back up| Built in lithium ion battery with 3yr reserve
Max on/off timings| 16 x on and off timing cycles
Minimum interval between on/off times| 1 min

Operating Instructions

Setting the time| Press and hold the button Press D+ to select the date Press H+ to select the hour Press M+ to select the minute

When the date and time have been entered, release the button

---|---
Change between 12hr/24hr format| Press the  button for 3 secs to alternate between the 12 and 24 hour time format
Setting a time interval| Press the button repeatedly to reach the timing setting required. There are 16 programmable time periods, numbered 1 to 16.

The ON time is shown first. Pressing the button again shows the OFF time.

Where no time is currently programmed, the display will show – –

When you reach the time setting required:

Press D+ to select the date. Single days of the week and groups of days are available

Press H+ to select the hour Press M+ to select the minute

To clear a time scroll to the require interval time and then press the MANUAL button.

Override| Press the MANUAL button to alternate between permanently off, permanently on and automated (controlled by the timer)
Factory setting reset| Press the RESET button

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>