Definitive Technology AW6500 All Weather Speaker with Bracket Operational Guide

Definitive Technology AW6500 All-Weather Speaker with Bracket

INTRODUCTION

Thank you for choosing Definitive Technology AW Series all-weather outdoor loudspeakers. Your AW loudspeaker is a unique high-performance product developed to allow you to experience the joy of superb music reproduced anywhere, whether indoors or outdoors, in both domestic and commercial applications. It utilizes specially developed materials and components, brought together to achieve a level of sound quality previously unavailable in all-weather loudspeakers.
Our engineers have spent many years in developing this product. In order to ensure that you experience the finest performance and durability possible, we encourage you to take a moment to fully read this owner’s manual and familiarize yourself with the proper installation and set-up procedures for your AW Series speakers.

SAFETY PRECAUTIONS

CAUTION! To reduce the risk of electric shock and fire, do not remove the cover or back plate of this device. There are no user-serviceable parts inside. Please refer all servicing to licensed service technicians.
CAUTION! The international symbol of a lightning bolt inside a triangle is intended to alert the user to uninsulated “dangerous voltage” within the device’s enclosure. The international symbol of an exclamation point inside a triangle is intended to alert the user to the presence of important operating, maintenance and servicing information in the manual accompanying the device.
CAUTION! To prevent electrical shock, match wide blade of plug to wide slot, fully insert.
CAUTION! To reduce the risk of electrical shock, do not expose this equipment to rain or moisture.

1. Read Instructions —All safety and operating instructions should be read before operating the device.
2. Retain Instructions —The safety and operating instructions should be retained for future reference.
3. Heed Warnings —All warnings on the device and in the operating instructions should be adhered to.
4. Follow Instructions—All operating and safety instructions should be followed.
5. Water & Moisture—The device should never be used in, on or near water for risk of fatal shock.
6. Carts & Stands—The device should only be used on carts or stands recommended by the manufacturer.
7. Wall & Ceiling Mounting—The device should be mounted on a wall or ceiling only as recommended by the manufacturer.
8. Ventilation —The device should always be located in such a way that it maintains proper ventilation. It should never be placed in a built-in installation or anywhere that may impede the flow of air through its heat sink.
9. Heat —Never locate the device near heat sources such as radiators, floor registers, stoves or other heat-generating devices.
10. Power Supply —The device should only be connected to a power supply of the type described in the operating instructions or as marked on the device.
11. Power Cord Protection —Power cables should be routed so they are not likely to be stepped on or crushed by items placed on them or against them. Special attention should be paid to areas where the plug enters a socket or fused strip and where the cord exits the device.
12. Cleaning —The device should be cleaned in accordance with manufacturer’s instructions.
13. Periods Of Non-Use —The device should be unplugged when not being used for extended periods.
14. Dangerous Entry —Care should be taken that no foreign objects or liquids fall or are spilled inside the device.
15. Damage Requiring Service —The device should be serviced by licensed technicians when:
16. The plug or power supply cord has been damaged.
17. Objects have fallen or liquid has spilled inside the device.
18. The device has been exposed to moisture.
19. The device does not appear to be operating properly or exhibits a marked change in performance.
20. The device has been dropped or the cabinet becomes damaged.
21. Service— The device should always be serviced by licensed technicians. Only replacement parts specified by the manufacturer should be used. The use of unauthorized substitutions may result in fire, shock, or other hazards.

UNPACKING YOUR AW SPEAKERS

Please Inspect For Shipping Damage

Each loudspeaker leaves our plant in perfect condition. Any visible or concealed damage most likely occurred in handling after it left our plant and should be reported at once to your Definitive dealer or the shipping company which delivered your loudspeaker.

POSITIONING YOUR AW SERIES LOUDSPEAKERS

Position your AW loudspeakers as close as possible to the area where you will be listening to them. The AW speakers have a very wide dispersion pattern; however, if you are trying to cover a very large area, you will be better off using multiple pairs of AW speakers in order to achieve an even distribution of sound. With multiple pairs you will avoid having areas where the sound is too loud and others where the sound is not loud enough. One pair of AW Series loudspeakers will cover approximately 200 – 400 square feet of listening area at moderately loud levels. Try to point the speakers directly at the listening area.

The AW Series speakers utilize special components and materials for outdoor use. However, you will achieve the longest life of the speaker by positioning it to minimize exposure to the elements as much as possible.

AW speakers may be oriented either horizontally or vertically. Always position the speakers so that the side with the mid/bass driver and tweeter (the Definitive Technology logo badge is on this side) faces the listening area. The side with the Low Bass Radiator may point toward an adjacent surface such as a wall, the Low Bass Radiator may point toward an adjacent surface such as a wall, the underside of an eave or the ground, as long as there are a couple of inches between the Low Bass Radiator and the surface. Positioning the Low Bass Radiator near a large surface will give you louder bass. If you want less bass, move the speaker farther away from the wall or ground.

Mounting the speakers horizontally under your roof eaves is a good location (especially if it is on the same level as the listening area). Point the driver/tweeter/logo side down towards the listening area.

PAINTING AW SERIES LOUDSPEAKERS

You may paint white versions of the AW6500 speakers to match your color scheme or to blend in with their surroundings.

You will need:

• A spray can of primer paint (Krylon Spray Primer #1318, or equivalent).
• A spray can of the paint of your choice. Choose exterior grade paint if you plan to use the speakers outdoors.
• A paperclip, awl or corkscrew (for removing the grille) [figure A].
• Masking tape.
• Paint mask (not included) to cover parts that should not be painted. To make an easy paint mask use the grille as a template and cut a mask from heavy, nonporous craft paper.

PREPARING TO PAINT

1. Separate the parts of the speaker. Remove the bracket knobs and brackets by rotating the bracket knobs counter-clockwise until they come off. Remove the grilles by carefully hooking them with an awl or bent paper clip and pulling gently away from the cabinet [figure A].
2. Mask the binding posts on the back of the speaker [figure B], the metal threaded screw inserts on the end panels and the metal screws on the bracket knobs. Carefully mask both baffles to protect the drivers, tweeters, low-bass radiators, and baffles [figure C]. Make sure the tape forms a tight seal around the edges so that no paint can get on the baffle or speaker parts. If paint gets on the speaker parts (driver, tweeter, Low Bass Radiator), it will affect the sound and is not covered by the warranty. The grille features an engraved logo badge. You can remove it before painting the grille or paint right over it.

PAINTING THE CABINET, BRACKET KNOBS AND BRACKET

1. Apply two thin coats of primer to the cabinets and locking knobs. The brackets do not require primer.
2. When the primer is completely dry, apply the finish color [figure D].
3. When the paint is completely dry, remove the masking materials.
4. Do not re-attach the speaker to the bracket until the bracket is mounted. Try to keep all handling of freshly painted parts to a minimum.

PAINTING THE GRILLE

1. The grille features an even, protective powder coating. This powder coating is an ideal primer. The grille features an engraved logo badge. You can remove it before painting the grille or paint right over it. Rotate the logo badge to its horizontal or vertical orientation prior to painting the grille.
2. Using spray paint, spray two thin coats of finish color with no primer [figure E]. If you’re using a compressor and spray gun, use the finest, most diffuse setting. Be careful not to fill the holes in the grille with paint.
3. When the paint is completely dry, carefully fit the grille into its recess so that it is just resting on the cabinet. Starting with one corner, go around the speaker and push the grille into the grille notch a little bit at a time. Be gentle; the grille may be easily bent out of shape by rough handling.

MOUNTING AW SERIES SPEAKERS

The AW speakers can be mounted vertically or horizontally but remember to always point the speaker in such a way as to allow water to roll off the driver cone and/or Low Bass Radiator.
Installation of AW Series Loudspeakers requires basic skills in using tools such as a drill and screwdriver. If you are in doubt that you possess the necessary skills or tools, consult your Definitive Technology dealer, general contractor or a professional installer.
To mount the speakers, remove the bracket, mount the bracket to the surface, and then re-attach the speaker to the bracket, re-insert the locking knobs and tighten.

Aim the speaker so that the driver/tweeter side points as directly as possible toward the listening area.

DETAILED MOUNTING DIRECTIONS

1. Make sure the mounting hardware and surface you choose are both capable of holding the weight of the speaker (see specifications on page 11) combined with the force generated by strong wind and/or snow accumulations common to your area.
2. Make sure the locations you select do not conceal electrical wiring or plumbing behind the surface.
3. Prior to installation, hold the speaker in the chosen location to make sure it safely clears obstacles such as ceiling, adjacent walls, corners, beams, lighting fixtures and door/window frames.
4. Remove the bracket and locking knobs by turning them counter-clockwise until they come completely out of the cabinet.
5. Using the slots in the bracket as a template, mark the screw locations with a pencil.
6. If you are certain that there is a stud behind the wall surface, drive #10 screws (not included) through the wall and into the stud [figure F].
7. If there is no stud behind the wall at the chosen location, install wall anchors (not supplied) into the wall by following the wall anchor manufacturer’s instructions. Always use two wall anchors and two screws per speaker [figure F]. We do not provide mounting screws or other hardware because we do not know what kind of material you will be attaching the speaker to. For wood surfaces and studs, use wood screws; for sheetrock or gypsum, you should use wall anchors; for masonry, use masonry anchors.
8. Drive screws into stud or wall anchors, leaving screw heads protruding 1/8″ (3 mm).
9. If speaker wire is being fed from a hole in the wall behind the bracket, pull this speaker wire through the center hole in the bracket before mounting the bracket.
10. Line up the bracket attached to the speaker, so that the screw heads pass through the large center hole of the bracket’s screw slot.
11. Let the speaker and bracket slide straight down, allowing the screw head to slip behind the smaller end of the slot.
12. Tug gently on the speaker to make certain that the screws and bracket are properly aligned and that the wall anchors are secure.
13. If the bracket is not snug against the wall, remove the speaker from the wall, drive the screws in a little further, and then remount the speaker.
14. Once the speaker is mounted, the bracket locking knobs can be loosened to “aim” the speaker and then hand-tightened to keep the speaker angled correctly.
15. Follow the hookup directions on page 9.
16. Rotate the logo badge so your friends and neighbors can see the Definitive Technology logo and be all jealous that you got the really good stuff.

ADJUSTING THE BRACKET

In order to point the driver/tweeter/logo side toward the listening position, turn the locking knobs counter-clockwise until the speaker is loose enough in the bracket to rotate. Hand-tighten the locking knobs to secure the speaker in the desired angle

IMPORTANT SAFETY NOTICE

It is essential that you use appropriate hardware that is designed for proper, safe and secure mounting to the surface to which you are attaching the AW loudspeaker. If you are unsure in any way about how to do this, consult a building contractor or professional installer.

CONNECTING THE SPEAKERS

It is critical for proper performance that both speakers (left and right) be connected in proper polarity. Note that one terminal on each speaker (the +) is colored red and the other (the -) is colored black. Please make certain that you connect the red (+) terminal on each speaker to the red (+) terminal of its channel on your amplifier or receiver and the black (-) terminal to the black (-) terminal. It is essential that both speakers be connected in the same way to the amplifier (in phase). If you experience lack of bass, it is likely that one speaker is out of phase with the other; double-check the wiring and reconnect if necessary.

Your AW Series speakers should sound good right out of the box; however, a pre-conditioning (break-in) period of 20–40 hours of normal playing at moderate volume is required to reach full performance capability. Pre- conditioning allows the driver suspensions to loosen and results in fuller bass, clearer, more open midrange, and smoother high-frequency reproduction.

POWER AND LOUD LISTENING LEVELS

It takes more speakers and more amplifier power to achieve a given amount of sound outdoors than it takes indoors. Keep this in mind when designing and listening to your outdoor system. Be careful how loud you turn up your outdoor system. We recommend leaving the bass and treble controls on your amplifier or receiver at their at (0 dB) positions.
Audible distortion when the speakers are playing at loud levels is caused by driving (turning up) your receiver or amplifier louder than it or the speakers are capable of playing. Most receivers and amplifiers put out their full-rated power well before the volume control is turned all the way up, so the position of the volume control is a poor indicator of its power limit. If your speakers distort when you play them loud, turn the volume down!

COMMERCIAL APPLICATIONS

AW Series speakers are perfect for restaurant, bar and other retail commercial applications indoors and out. Their grilles and enclosures can be readily cleaned of dust, smoke and oily films with soap and water while their robust construction ensures years of reliable operation. Definitive AW series speakers have broader dispersion and better bass than conventional commercial speakers so you will need fewer of them to cover an area with great sound. Your customers will appreciate that you have made an extra effort to treat them with high quality music in your place of business while your competitors torture their customers with harsh noise. Definitive Technology the competitive edge!

CARE

Periodically wash your AW speakers with a mild soap and water solution to remove dirt and pollutants.

SERVICE

Your local Definitive Technology dealer will usually be able to service your Definitive loudspeakers. If, however, you wish to return the speaker to Definitive, please contact us first, describing the problem and requesting authorization as well as the location of the nearest factory service center. Please note that the address given in this booklet is the address of our office only. Under no circumstances should loudspeakers be shipped to our office or returned without contacting us first and obtaining return authorization.
Definitive Technology Offices 11433 Cronridge Drive, Owings Mills, Maryland 21117
Phone: 800-228-7148 (US & Canada), 01 410-363-7148 (all other countries)

TECHNICAL ASSISTANCE

It is our pleasure to offer assistance if you have any questions regarding your AW Series speakers or their set-up. Please contact your nearest Definitive Technology dealer or call us directly at 800-228-7148 (US & Canada),  01 410-363-7148 (all other countries), or e-mail info@definitivetech.com

SPECIFICATIONS

• DIMENSIONS: 147/16″ L x 87/8″ W x 91/4″ D
• DRIVER COMPLEMENT: One 61/2″ BDSS cast-basket bass/midrange driver One 51/2″ x 10″ pressure-driven Low-Bass Radiator One 1″ Pure Aluminum dome tweeter
• INPUTS: Gold-plated 5-way binding posts
• FREQUENCY RESPONSE: 40 Hz – 30 kHz
• NOMINAL IMPEDANCE: 4 – 8 Ohms
• ASSOC. AMPLIFICATION: 10 – 200 Watts/channel
• SENSITIVITY: 92 dB
• WEIGHT: 10 lbs. (4.52 kg)

LIMITED USA WARRANTY

5-Years for Drivers and Cabinets

Definitive Technology warrants to the original retail purchaser only that this Definitive Technology Loudspeaker Product (the “Product”) will be free from defects in materials and workmanship for a period of five (5) years from the date of the original purchase from a Definitive Technology Franchised Dealer. However, this warranty will automatically terminate prior to the expiration of five (5) years if the original retail purchaser sells or otherwise transfers the Product to any other party or if the serial number is defaced or removed. The original retail purchaser shall hereinafter be referred to as “you.” To obtain the warranty protection for your Definitive Technology Product(s), you must fill out the Warranty Registration Card(s), within ten days of the date of purchase.
Defective Products must be shipped, together with proof of date of purchase, prepaid insured to the Franchised Dealer from whom you purchased the Product, or to the nearest Factory service center. Product(s) must be shipped in the original shipping container or its equivalent; in any case the risk of loss or damage in transit is to be borne by you. If, upon examination at the Factory or a Definitive Technology Franchised Dealer it is determined that the unit was defective in materials or workmanship at any time during this Warranty period, Definitive Technology or the Definitive Technology Franchised Dealer will, at its option, repair or replace this product at no additional charge, except as set forth below. All replaced parts and Product(s) become the property of Definitive Technology. Product(s) replaced or repaired under this Warranty will be returned to you, within a reasonable time, freight collect.
This Warranty does not include service or parts to repair damage caused by accident, misuse, abuse, negligence, improper mounting, inadequate packing or shipping procedures, voltage in excess of the rated maximum of the unit, normal wear and tear, cosmetic appearance of cabinetry or components not directly attributable to defects in materials or workmanship, or service, or repair or modification of the Product which has not been authorized by Definitive Technology.
Definitive Technology makes no Warranty with respect to its Products purchased from dealers or outlets other than Definitive Technology Franchised Dealers.
This Warranty is in lieu of all other expressed Warranties. If this Product is defective in material or workmanship as warranted above, your sole remedy shall be repair or replacement as provided above. In no event will Definitive Technology be liable to you for any incidental or consequential damages arising out of the use or inability to use the Product, even if Definitive Technology or a Definitive Technology Franchised Dealer has been advised of the possibility of such damages, or for any claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation may not apply to you.
All implied warranties on the Product are limited to the duration of this expressed Warranty. Some states do not allow limitation on how long an implied Warranty lasts, so the above limitations may not apply to you. This Warranty gives you specific legal rights, and you also may have other rights which vary from state to state.

CE

This product complies with the essential requirements of the EMC directive 89/336/EEC.

Frequently Asked Questions

How do you protect your Definitive Technology AW6500 speakers in the rain?****

During cold weather, a professional approach is to cover the speakers with plastic bags or containers. This offers at least some protection from precipitation, sleet, snow, and extreme humidity, while the change in temperature may still cause problems. Finally, turn off your speakers when it’s terrible outside.

What happens if Definitive Technology AW6500 speakers get wet?****

Leaving moisture on its surface could cause the speaker to freeze and malfunction, especially in colder climates. After utilising the speaker, make sure to wipe off any remaining moisture. Place the speaker on a dry towel or piece of fabric.

Can cold weather damage Definitive Technology AW6500 speakers?****

Your speakers won’t suffer permanent harm from the cold alone. Extreme weather may destroy the adhesive, but the remainder of the speaker should be able to withstand below-freezing temperatures.

How do you Definitive Technology AW6500 weather proof speakers?****

Applying a high gloss polymer finish to your speakers is the simplest and least expensive way to waterproof them. Usually, a polymer varnish or a polyurethane spray is used as the coating; however, the polyurethane spray is only utilitarian and has no aesthetic value.

Where are definitive speakers made?****

Maryland-Designed, But Now a United Family. Despite being a member of a larger family now, Sound United, we continue to design and engineer our speakers at our original Acoustic Research and Development (ARAD) facility in Owings Mills, Maryland.

Can water permanently damage Definitive Technology AW6500 speakers?****

Your phone’s speaker may sound distorted or unclear after coming into touch with water. Neglecting it could even cause irreparable damage.

How do you fix a water-damaged Definitive Technology AW6500 speaker?****

Use a microfiber cloth or another quick-absorbing material to remove the water from your device. To dry the outside of your smartphone or the speakers, you can alternatively use a cotton cloth. Dry it out gently, making cautious to keep the device from moving too much.

Is two Definitive Technology AW6500 speakers preferred or would one suffice?****

Two would sound much better, in my opinion.

Are you able to mount to the ceiling?****

These can be mounted either horizontally or vertically. You could put them on the ceiling and direct them downward because the bracket arm is movable.

In a two-channel indoor stereo application, how would these sound?****

Yes I have two pairs, one of which I’ve kept inside for the winter in my garage. They are wonderful. They seem to have comparable acoustics to my mixing monitors.

Are these Definitive Technology AW6500 speakers powered?****

It is not powered, no. This speaker will need to be powered by an amplifier. Any 100w per channel amplifier will work.

Any recommendations for an outside wall mount for 25 ohm Definitive Technology AW6500 speakers?****

If you’re unsure, you might want to get in touch with the business personally and explain what you’re wanting to do.

Would you please advise how this compares with Klipsch ignoring the price difference?****

With its Low Bass Radiator, the Definitive Technology will produce deeper bass than the Klipsch. A larger soundstage will also be available thanks to the Definitive Technology. In an outdoor setting, this can prove to be very advantageous. Klipsch Horn-loaded tweeters are frequently more focused.

Can I use a tripod with these Definitive Technology AW6500 speakers?****

You most likely COULD, but whether you would actually want to is a different story. First off, the speakers lack tripod attachments, so unless the tripod’s screw holes match those on the speakers, you’d have to improvise a mount. In addition, a tripod would help you get farther away from any kind of wall. The 3-sided enclosure of these speakers has drivers on TWO of its sides. The “front” is where the Low and Mid drivers are directed to go. The low frequencies are sent BACK by the woofers, who rely on a wall or ceiling to reflect them to the listener.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>