CORSAIR RM750e Fully-Modular ATX Power Supply User Manual

June 9, 2024
Corsair

CORSAIR RM750e Fully-Modular ATX Power Supply User Manual
CORSAIR RM750e Fully-Modular ATX Power Supply

INTRODUCTIONS

CONGRATULATIONS ON THE PURCHASE OF YOUR NEW CORSAIR RMe SERIES ATX POWER SUPPLY!

CORSAIR RMe Series fully modular power supplies deliver reliable 80 PLUS Gold efcient power to your system.

SAFETY AND PROTECTION

  • Over-Voltage Protection (OVP)
    Over-voltage protection for the 12V, 5V, and 3.3V DC outputs is required to comply with the ATX specification. OVP shuts down the PSU in the event that the DC outputs exceed a set level, determined by the PSU manufacturer.

  • Over-Current Protection (OCP)
    OCP is featured on the 3.3V, 5V, and 12V rails. OCP ensures that the output of the DC voltage rails remains within safe operating limits.

  • Over-Temperature Protection (OTP)
    OTP ensures that the PSU will shut down when the internal temperature reaches a set point. This is usually as a result of internal current overloading or a fan failure.

  • Short-Circuit Protection (SCP)
    A short-circuit is defned as any output impedance of less than 0.1 ohms. Amongst other things, SCP ensures that the PSU shuts down should the 3.3V, 5V, and 12V rails short to any other rail, or to ground. It also ensures that no damage should occur to the unit, or your PC’s components in the event of a short.

  • Over Power Protection (OPP)
    Over power protection shuts off the PSU when the power drawn is between 115% and 135% of the rated power.

  • Catastrophic Failure Protection
    PSU must have protection circuitry to shut down safely to prevent damage from any catastrophic failures such as name, excessive smoke, charred PCB, fused PCB conductor, startling noise, emission of molten material, etc.

RM750e INCLUDED HARDWARE AND SPECIFICATIONS

Dimensions: 140mm(L) x 150mm(W) x 86mm(H)
Package Contents: Power Supply, AC Cable, DC Cables, Cable Ties, Mounting Screws, Safety Leaet

CORSAIR RM750e POWER TABLE

| MAX LOAD|

MAX OUTPUT

---|---|---
MODEL| RPS0147| A| 20A| 110W
PART NO.| 75-004601| +5V| 20A
AC INPUT RATING| 100 -240V a.c.| +12V| 62.5A| 750W
INPUT CURRENT| 10 – 5A| -12V| 0.3A| 3.6W
FREQUENCY| 47 – 63Hz+| 5Vsb| 3A| 15W

TOTAL POWER: 750W

CORSAIR RM750e POWER SUPPLY EFFICIENCY

CORSAIR RM750e POWER SUPPLY EFFICIENCY

CORSAIR RM750e POWER SUPPLY FAN NOISE CURVE

CORSAIR RM750e POWER SUPPLY FAN NOISE CURVE

RM850e INCLUDED HARDWARE AND SPECIFICATIONS

Dimensions: 140mm(L) x 150mm(W) x 86mm(H)
Package Contents: Power Supply, AC Cable, DC Cables, Cable Ties, Mounting Screws, Safety Leaet

CORSAIR RM850e POWER TABLE

| MAX LOAD|

MAX OUTPUT

---|---|---
MODEL| RPS0157| +3.3V| 20A| 150W
PART NO.| 75-005036| +5V| 20A
AC INPUT RATING| 2100 -40V a.c.| +12V| 70.8A| 850W
INPUT CURRENT| -10 – 5A| 12V| 0.3A| 3.6W
FREQUENCY| 47 – 63Hz+| 5Vsb| 3A| 15W

TOTAL POWER: 850W

CORSAIR RM850e POWER SUPPLY EFFICIENCY

CORSAIR RM850e POWER SUPPLY EFFICIENCY

CORSAIR RM850e POWER SUPPLY FAN NOISE CURVE

CORSAIR RM850e POWER SUPPLY FAN NOISE CURVE

RM1000e INCLUDED HARDWARE AND SPECIFICATIONS

Dimensions: 140mm(L) x 150mm(W) x 86mm(H)
Package Contents: Power Supply, AC Cable, DC Cables, Cable Ties, Mounting Screws, Safety Leaet

CORSAIR RM1000e POWER TABLE

| MAX LOAD|

MAX OUTPUT

---|---|---
MODEL| RPS0158| +3.3V| 20A|

150W

PART NO.| 75-005037| +5V| 20A
AC INPUT RATING| 100 -240V a.c.| +12V| 83.5A| 1000W
INPUT CURRENT| 12 – 6A| -12V| 0.3A| 3.6W
FREQUENCY| 47 – 63Hz+| 5Vsb| 3A| 15W

TOTAL POWER: 1000W

CORSAIR RM1000e POWER SUPPLY EFFICIENCY

CORSAIR RM1000e POWER SUPPLY EFFICIENCY

CORSAIR RM1000e POWER SUPPLY FAN NOISE CURVE

CORSAIR RM1000e POWER SUPPLY FAN NOISE CURVE

CORSAIR RMe SERIES CABLE INFORMATION

DESCRIPTION QTY
CONNECTORS TOTAL LENGTH

ATX Cable (24-pin)
ATX Cable
| **** 610mm ± 10mm| **** 1| **** 1| **** 1
EPS/ATX12V Cable (8-pin) (4+4)
EPS/ATX12V Cable
| **** 650mm ± 10mm| **** 2| **** 2| **** 2
PCIe Cable (8-pin) (6+2)
PCIe Cable
| **** 750mm ± 10mm| **** 1| **** 1| **** 2
PCIe Cable (8-pin) (6+2 split)
PCIe Cable
| **** 600mm ± 10mm| **** 1| **** 1| **** 2
SATA Cable (3 SATA)
SATA Cable| **** 700mm ± 10mm| **** 1| **** 1| **** 1
SATA Cable (4 SATA)
SATA Cable| **** 800mm ± 10mm| **** 1| **** 1| **** 1
Peripheral Cable (4 PATA)
Peripheral Cable
| **** 750mm ± 10mm| **** 1| **** 1| **** 1

INSTALLING YOUR NEW RMe SERIES POWER SUPPLY

STEP 1: REMOVING YOUR EXISTING PSU
Warning! To ensure proper function, only use the DC cables included with your new PSU, unless your old cables are genuine CORSAIR cables of the same type. Please confirm your existing cables’ type before using them!
If you are building a new system, skip to Step 2:

  1. Disconnect the AC power cord from your wall outlet or UPS and from the existing power supply.
  2. Disconnect all the power cables from your video card, motherboard and all other peripherals.
  3. Follow the directions in your chassis manual and uninstall your existing PSU.
  4. Proceed to Step 2.

STEP 2: INSTALLING THE NEW POWER SUPPLY

  1. Make sure the power supply’s AC power cable is not connected.

  2. Follow the directions in your chassis manual and install the power supply with the screws provided.

  3. Connect the 24-pin (ATX12V) cable to the motherboard. Connect the 8-pin +12V (EPS12V) cable
    to the motherboard.

    • a. If your motherboard has an eight-pin +12V socket, connect the eight-pin cable directly to your motherboard.
    • b. If your motherboard has a four-pin socket, detach the four-pin from the eight-pin cable, and then plug this four-pin cable directly to your motherboard.
    • c. Some motherboards will require a mix of 8+4 pins, use as many EPS12V cables as necessary and do not mistake them for PCIe cables.
  4. Connect the peripheral cables, PCI-Express cables, and SATA cables.

    • a. Connect the SATA cables to your SATA SSD or hard drive’s power sockets.
    • b. Connect the PCI-Express cables to the power sockets of your PCI-Express video cards if required.
    • c. Connect the peripheral cables to any peripherals requiring a 4-pin connector.
    • d. Make sure all the cables are tightly connected. Be sure to save any unused modular cables for future component additions.
  5. Connect the AC power cord to the power supply and turn it on by pushing the switch to the ON position (marked with “I”).

Support

Web: corsair.com
Phone: 888-222-4346
Warranty: corsair.com/support/warranty

Support: support.corsair.com
Blog: corsair.com/blog
Forum: forum.corsair.com
YouTube: youtube.com/corsairhowto

© 2022 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.
49-002627 AA

CORSAIR Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals