DEFINITIVE TECHNOLOGY DM20 Slim Center Channel Speaker User Guide
- October 30, 2023
- DEFINITIVE TECHNOLOGY
Table of Contents
DEFINITIVE TECHNOLOGY DM20 Slim Center Channel Speaker
Product Information
- Product Name: DM20 Speaker
- File Name: HBP4778_Dymension_QSG_DM20_MP_2022-07-29.pdf
- Color: Black + Pantone 299C (Dimension blue)
- Paper: Tortilla smooth/80T (uncoated stock) (98 opacity, 10.6 calipers, 150 smoothness)
- Printing Process: Offset lithography
- Product Size: A5; 148 mm x 210 mm
- Binding: Staple binding
Product Usage Instructions
- Unpack the box and check that all the items are included.
- Decide on the placement of the DM20 speaker as a left, center, right (LCR), or another channel such as surround. Refer to the online user manual for placement suggestions.
- Connect the speaker wires to the binding posts by following the steps below:
- Strip about 3/8 in (10 mm) of insulation from two speaker wires.
- Unscrew the binding posts.
- Connect the wires to the binding posts.
- Tighten the binding posts until secure.
- Connect the speaker wires to your amplifier.
- Adjust the settings on your amplifier, then listen to music or watch TV to test the speaker’s sound and volume.
Note: For any troubleshooting assistance or frequently asked questions, scan the QR code to download the user manual or visit support.definitivetechnology.com.
Unpack
Check that the items shown are included in the box.
Place
- The DM20 speaker can be used as a left, center, right (LCR) or other channel such as a surround. The ideal speaker placement is dependent on environment and personal preference. See the online user manual for placement suggestions.
Connect Speaker Wires to the Binding Posts
- Strip about 3/8 in (10 mm) of insulation from two speaker wires.
- Unscrew the binding posts.
- Connect the wires to the binding posts.
- Tighten the binding posts until secure.
Connect the Speaker Wires to Your Amplifier
- Connect the other ends of your speaker wires to your amplifier.
- Ensure that the speaker is always connected to the receiver or amplifier + to + and – to –.
Setup Is Complete!
- support.definitivetechnology.com
- Adjust the settings on your amplifier, then listen to music or watch TV to test the speaker’s sound and volume. Scan the QR code to download the user manual, see frequently asked questions, or get troubleshooting assistance.
- Share Photos Partager Des Photos Compartir Fotos
- Sound United, LLC
- 5541 Fermi Court
- Carlsbad, CA 92008
- U.S.A
- EU Contact: Sound United Europe, A division of D&M Europe B.V. Beemdstraat 11, 5653 MA Eindhoven, The Netherlands
- UK Importer: D&M Audiovisual Ltd. Dale Road, Worthing, West Sussex BN11 2BH United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>