DEFINITIVE TECHNOLOGY DM30 Flagship Center Channel Speaker User Guide

DEFINITIVE TECHNOLOGY DM30 Flagship Center Channel Speaker

Product Information

The product is a tower speaker with the model number DM30TM. It comes with a user manual in PDF format, which was last revised on 21 April 2022. The manual includes specifications for the scale, color, paper, and binding of the document. The speaker uses two speaker wires that can be connected to an amplifier. It requires a power cable to be plugged into a wall outlet. The product is manufactured by Sound United LLC, and the European contact for the company is Sound United Europe, a division of D&M Europe B.V.

Product Usage Instructions

Follow the below instructions to use the tower speaker:

1. Unpack the tower speaker and check that all the items are included in the box.
2. Place the speaker as close to the center of your TV as possible. If you’re placing the speaker inside a shelf, make sure there’s at least 1-2 in (2.5-5 cm) of space between the top of the speaker and the shelf. Refer to the online user manual for placement suggestions.
3. Connect two speaker wires to the binding posts of the tower speaker. Strip about 3/8 in (10 mm) of insulation from each wire. Unscrew the binding posts, connect the wires, and tighten the binding posts until secure.
4. Connect the speaker wires to your amplifier.
5. Plug the power cable into the tower speaker and then a wall outlet.
6. Adjust the settings on your amplifier and test the speaker sound and volume by listening to music or watching TV.

If you face any issues during usage, scan the QR code in the user manual to download it or get troubleshooting assistance.

•   Date 21 April 2022
• File Name  HBP4780_Dymension_QSG_DM30_EU_LPP_2022-04-21.pdf
• Scale  Full Size
• Drawn By  ML
• Color 2 Color (Black + Pantone 299C (Dymension blue))
• Paper Process  Tortilla smooth/80T (uncoated stock) (98 opacity, 10.6 caliper, 150 smoothness) Offset
• Notes  Offset lithography
• Artwork  Digital file; A5; 148 mm x 210 mm
• Binding  Staple binding

TITLE BLOCK DOES NOT PRINT

Unpack

• Check that the items shown are included in the box.

Place

Place the speaker as close to the center of your TV as possible. If you’re placing the speaker inside a shelf, make sure there’s at least 1-2 in (2.5-5 cm) of space between the top of the speaker and the shelf. Refer to the online user manual for placement suggestions.

Connect Speaker Wires to the Binding Posts

1. Strip about 3/8 in (10 mm) of insulation from two speaker wires.
2. Unscrew the binding posts.
3. Connect the wires to the binding posts.
4. Tighten the binding posts until secure.

Connect the Speaker Wires to Your Amplifier

Connect the other ends of your speaker wires to your amplifier. Ensure that the speaker is always connected to the receiver or amplifier + to + and – to –.

Connect to Power

• Plug the power cable into the tower speaker and then a wall outlet

Setup Is Complete!

• support.definitivetechnology.com

Adjust the settings on your amplifier, then listen to music or watch TV to test the speaker’s sound and volume. Scan the QR code to download the user manual, see frequently asked questions, or get troubleshooting assistance.

Share Photos | Partager Des Photos | Compartir Fotos#Dymension Sound United, LLC 5541 Fermi Court Carlsbad, CA 92008 U.S.A

EU Contact:
Sound United Europe, A division of D&M Europe B.V. Beemdstraat 11, 5653 MA Eindhoven, The Netherlands

UK Importer:
D&M Audiovisual Ltd. Dale Road, Worthing, West Sussex BN11 2BH United Kingdom

References

• Support Home Page

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>