DEFINITIVE TECHNOLOGY BP9000 Series SR9080BP Bipolar Surround Speakers Owner’s Manual

June 4, 2024
DEFINITIVE TECHNOLOGY

DEFINITIVE TECHNOLOGY BP9000 Series SR9080BP logo

DEFINITIVE TECHNOLOGY BP9000 Series SR9080BP Bipolar Surround Speakers

DEFINITIVE TECHNOLOGY BP9000 Series SR9080BP
product

Thank you for choosing the Definitive Technology BP9000 Bipolar Surround Speakers. These compact, high-quality bipolar speakers are intended primarily for use as a rear or side speakers. In addition, they can also be used as front “effects” speakers in multichannel DSP systems. The lifelike soundfield and flexible placement make this speaker an excellent addition to any room.
Our engineers have spent many years in developing this product. In order to ensure that you experience the finest performance possible, we encourage you to take a moment to fully read this owner’s manual and familiarize yourself with the proper installation and setup procedures for your SR surround speakers.

Positioning Your BP9000 Surround Speakers

FIGURE 1 – REAR AND SIDE SURROUND PLACEMENTDEFINITIVE TECHNOLOGY BP9000
Series SR9080BP fig 1

  • For use as rear surround speakers, position the speakers approximately 6’ (2 m) high and 6’ (2 m) apart directly behind the listening area.
  • For use as side surround speakers, position the speakers approximately 6’ (2 m) high and directly beside or 1-2’ (30-60 cm) behind the listening area.

Connecting Your Loudspeakers

FIGURE 2 – WIRING AND POLARITYDEFINITIVE TECHNOLOGY BP9000 Series
SR9080BP fig 2

  • Strip 1/4” (6mm) wire.
  • Identify markings on wire and assign +/-.

DEFINITIVE TECHNOLOGY BP9000 Series SR9080BP fig 3

  1. Unscrew binding post and insert wire.
  2. Tighten until wire is secure.

Ensure that the speaker is always connected to the receiver or amplifier + to and to –.

FIGURE 3 – CONNECTING SPEAKER TO AMPLIFIERDEFINITIVE TECHNOLOGY BP9000
Series SR9080BP fig 4

Speaker Setup Small,
SR9080BP Crossover at 80Hz
SR9040BP Crossover at 100Hz

VERY IMPORTANT

Do not use your receiver’s auto setup function!!!
The bipolar nature of this speaker will often confuse the receiver’s auto setup.

Dolby Digital and DTS multi-channel systems have critical channel balance and speaker setup procedures which must be followed if the system is to perform properly. Consult your receiver’s or processor’s manual to learn how to access your system setup menus. Set speaker setup to “small” and crossover to 80Hz for the SR9080BP and 100Hz for the SR9040BP.

Troubleshooting

If you experience any difficulties with your BP Series loudspeakers, try the suggestions below. If you still have problems, contact your Definitive Technology Authorized Dealer for assistance.

  1. Audible distortion when the speakers are playing at loud levels is caused by driving (turning up) your receiver or amplifier louder than it or the speakers are capable of playing. Most receivers and amplifiers put out their full-rated power well before the volume control is turned all the way up, so the position of the volume control is a poor indicator of its power limit. If your speakers distort when you play them loud, turn the volume down!
  2. If you experience a lack of bass, it is likely that one speaker is out of phase with the other and needs to be rewired paying closer attention to connect positive to positive and negative to negative on both channels. Most speaker wire has some indicator (such as color-coding, ribbing or writing) on one of the two conductors to help you maintain consistency. It is essential to connect both speakers to the amplifier in the same way (in phase).
  3. Make sure all your system interconnects are solidly in place.
  4. Check that no foreign objects or liquid has entered the speaker cabinet.

Service

Service and warranty work on your Definitive product will normally be performed by the Definitive Technology retailer or importer. If, however, you wish to return the product to us, please contact us first, describing the problem and requesting proper authorization. Please note: Definitive phone and email technical support is offered only in English.

Product Servicing
The address given in this booklet is the address of our offices. Under no circumstances should loudspeakers be shipped to our offices or returned without contacting us first and obtaining return authorization. e-mail: [email protected]

Technical Assistance

Contact Us Directly
Please contact the Definitive Technology Customer Service and Technical Support Group at 1-800-223-5246. To best assist you we are available 7 days a week, Monday – Friday from 9am to 9pm and on Saturdays and Sundays from 10am to 6pm email: info@DefinitiveTech. com

Warranty

Limited Warranty: 5 Years for Drivers and Cabinets, 3 Years for Electronic Components
DEI Sales Co., dba Definitive Technology (herein “Definitive”) warrants to the original retail purchaser only that this Definitive loudspeaker product (the “Product”) will be free from defects in material and workmanship for a period of five (5) years covering the drivers and cabinets, and three (3) years for the electronic components from the date of the original purchase from a Definitive Authorized Dealer. If the Product is defective in material or workmanship, Definitive or its Authorized Dealer will, at its option, repair or replace the warranted product at no additional charge, except as set forth below. All replaced parts and Product(s) become the property of Definitive. Product
that is repaired or replaced under this warranty will be returned to you, within a reasonable time, freight collect. This warranty is non-transferrable and is automatically void if the original purchaser sells or otherwise transfers the Product to any other party. This Warranty does not include service or parts to repair damage caused by accident, misuse, abuse, negligence, inadequate packing or shipping procedures, commercial use, voltage in excess of the rated maximum of the unit, cosmetic appearance of cabinetry not directly attributable to defects in material or workmanship. This warranty does not cover the elimination of externally generated static or noise, or the correction of antenna problems or weak reception. This warranty does not cover labor costs or damage to the Product caused by installation or removal of the Product. Definitive Technology makes no warranty with respect to its products purchased from dealers or outlets other than Definitive Technology Authorized Dealer.

THE WARRANTY IS AUTOMATICALLY VOID IF:

  1. The product has been damaged, altered in any way, mishandled during transportation, or tampered with.
  2. The product is damaged due to accident, fire, flood, unreasonable use, misuse, abuse, customer applied cleaners, failure to observe manufacturers warnings, neglect or related events.
  3. Repair or modification of the Product has not been made or authorized by Definitive Technology.
  4. The product has been improperly installed or used. Product must be returned (insured and prepaid), together with the original dated proof of purchase to the Authorized Dealer from whom the Product was purchased, or to the nearest Definitive factory service center. The product must be shipped in the original shipping container or its equivalent. Definitive is not responsible or liable for loss or damage to the Product in transit.

THIS LIMITED WARRANTY IS THE ONLY EXPRESS WARRANTY THAT APPLIES TO YOUR PRODUCT. DEFINITIVE NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH YOUR PRODUCT OR THIS WARRANTY. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED EXPRESS, IMPLIED, WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED AND DISCLAIMED TO THE MAXIMUM EXTENT ALLOWED BY LAW. ALL IMPLIED WARRANTIES ON PRODUCTS ARE LIMITED TO THE DURATION OF THIS EXPRESSED WARRANTY. DEFINITIVE HAS NO LIABILITY FOR ACTS OF THIRD PARTIES. DEFINITIVE’S LIABILITY, WHETHER BASED ON CONTRACT, TORT, STRICT LIABILITY, ORANY OTHER THEORY, SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT FOR WHICH A CLAIM HAS BEEN MADE. UNDER NO CIRCUMSTANCE WILL DEFINITIVE BEAR ANY LIABILITY FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. THE CONSUMER AGREES AND CONSENTS THAT ALL DISPUTES BETWEEN THE CONSUMER AND DEFINITIVE SHALL BE RESOLVED IN ACCORDANCE WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALIFORNIA. DEFINITIVE RESERVES THE RIGHT TO MODIFY THIS WARRANTY STATEMENT AT ANYTIME. Some states do not allow the exclusion or limitation of consequential or incidental damages, or implied warranties, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. ©2009 DEI Sales Co. All rights reserved.

SPECIFICATIONS

DEFINITIVE TECHNOLOGY BP9000 Series SR9080BP fig
5

Definitive Technology
1 Viper Way
Vista, CA 92082
410-363-7148
800-228-7148
www.definitivetechnology.com
email: [email protected]
twitter: @DefinitiveTech

This product complies with the essential requirements of the EMC directive 89/336/EEC.
For more information on Definitive Technology Loudspeakers and accessories, visit www.definitivetechnology.com, or email [email protected]. Definitive Technology Vista CA the USA. 800-228-7148

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

DEFINITIVE TECHNOLOGY User Manuals

Related Manuals