DEFINITIVE TECHNOLOGY Dymension DM30 Flagship Center Channel Speaker User Guide
- October 30, 2023
- DEFINITIVE TECHNOLOGY
Table of Contents
DEFINITIVE TECHNOLOGY Dymension DM30 Flagship Center Channel Speaker
Product Information
The product is a speaker model DM30TM manufactured by Dymension. The user manual is in the form of a Quick Start Guide and is available in a digital format as a PDF file. The speaker is designed to be connected to an amplifier and can be used for listening to music or watching TV. The speaker comes with two binding posts for connecting speaker wires and requires a power source to function.
- Date: 29 July 2022
- File Name: HBP4779_Dymension_QSG_DM30_NA_LPP_2022-07-29.pdf
- Scale: Full Size
- Drawn By: ML
- Color: 2 color (Black + Pantone 299C (Dymension blue))
- Paper: Tortilla smooth/80T (uncoated stock) (98 opacity, 10.6 caliper, 150 smoothness)
- Process: Offset lithography
- Artwork Binding: Digital file; A5; 148 mm x 210 mm Staple binding
Product Usage Instructions
- Unpack the speaker.
- Place the speaker as close to the center of your TV as possible. If you’re placing the speaker inside a shelf, make sure there’s at least 1-2 in (2.5-5 cm) of space between the top of the speaker and the shelf. Refer to the online user manual for placement suggestions.
- Connect the speaker to the binding posts. Strip about 3/8 in (10 mm) of insulation from two speaker wires. Unscrew the binding posts. Connect the wires to the binding posts. Tighten the binding posts until secure.
- Connect the speaker to the amplifier.
- Connect the speaker to a power source.
- Adjust the settings on your amplifier, then listen to music or watch TV to test the speaker sound and volume.
Note: For Spanish instructions, refer to the user manual.
Unpack
- Check that the items shown are included in the box.
Place
- Place the speaker as close to the center of your TV as possible. If you’re placing the speaker inside a shelf, make sure there’s at least 1-2 in (2.5-5 cm) of space between the top of the speaker and the shelf.
- Refer to the online user manual for placement suggestions.
Connection
Connect to Binding Posts
- Strip about 3/8 in (10 mm) of insulation from two speaker wires.
- Unscrew the binding posts.
- Connect the wires to the binding posts.
- Tighten the binding posts until secure.
Connect to Amplifier
- Connect the other ends of your speaker wires to your amplifier. Ensure that the speaker is always connected to the receiver or amplifier + to + and – to –.
Connect to Power
- Plug the power cable into the tower speaker and then a wall outlet.
Setup Is Complete!
-
Adjust the settings on your amplifier, then listen to music or watch TV to test the speaker sound and volume.
-
Scan the QR code to download the user manual, see frequently asked questions, or get troubleshooting assistance.
More Information
Dymension
Sound United, LLC
- 5541 Fermi Court
- Carlsbad, CA 92008 U.S.A
EU Contact
- Sound United Europe, A division of D&M Europe B.V.
- Beemdstraat 11, 5653 MA Eindhoven, The Netherlands
UK Importer
- D&M Audiovisual Ltd.
- Dale Road, Worthing, West Sussex
- BN11 2BH United Kingdom