OPTICAL AA17089 Fiber Optic Terminal Box Instruction Manual
- June 9, 2024
- Optical
Table of Contents
Operation manual
Model: AA17089
AA17089 Fiber Optic Terminal Box
Step 1.
Open the Fiber optic terminal box. Check and prepare installation tools and
accessories. To establish easy and safe installation put the box where it will
be installed and measure the required length of the cable. Prepare the safe
installation of the box.
Step
2.
Strip the cable the required length, minimum 1 meter or more, to establish
easy and safe installation with enough buffer size. Fix the cable strength
member (4) on the column
(3), use cable gland (1) and stabilize with cable fixing part (2) inside the
box.
Step 3.
Coil the cable inside the bottom box and enter the stripped cable into the
splicing tray (1). Splice the stripped cable with the pigtails (2). Put on the
fiber protect sleeves, then in the splice tray (3).
Step 4.
Pass the spliced pigtails to the upper side of the tray and connect them with
the adapters. Coil the remaining cable in the puffers.
Step 5.
Connect the pigtails with drop cable connector after finishing the basic light
test or the measuring of all fibers.
Step 6.
Close the box after finishing all cable connections and then put it on the
designated place.
Documents / Resources
|
OPTICAL AA17089 Fiber Optic Terminal
Box
[pdf] Instruction Manual
AA17089, AA17089 Fiber Optic Terminal Box, Fiber Optic Terminal Box, Optic
Terminal Box, Terminal Box
---|---