OPTICAL AA17084 Fiber Optic Terminal Box User Manual
- June 9, 2024
- Optical
Table of Contents
Operation manual
Model: AA17084
AA17084 Fiber Optic Terminal Box
Step 1.
Open the Fiber optic terminal box. Check and prepare installation tools and
accessories. To establish easy and safe installation put the box where it will
be installed and measure the required length of the cable. Prepare the safe
installation of the box. 
Step 2.
Strip the cable the required length, minimum 1 meter or more, to establish
easy and safe installation with enough buffer size. Fix the cable strength
member (4) on the column
(3), then use the cable gland (1) and stabilize with cable fixing part (2)
inside the box.
Step 3.
Coil the cable inside the bottom box and enter the stripped cable into
splicing the tray (1). Splice the stripped cable with the pigtails (2). Put on
the fiber protect sleeves, then in the splice tray (3).
Step 4.
Pass the spliced pigtails to the upper side of the tray and connect with the
adapters, so the remaining cables are coiled up the puffer.
Step 5.
Connect the pigtails with the drop cable connector after finishing the basic
light test or the measuring of all fibers, then ensure the strain relief with
the fixing rib.
Step 6.
Close the box after finishing all cable connections.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>