Corning Optical Communications DHRU-G2-19 HRU Digital High Power Amplifier Module User Guide
- June 1, 2024
- Corning Optical Communications
Table of Contents
Corning Optical Communications DHRU-G2-19 HRU Digital High Power
Amplifier Module
Product Information
Specifications
- Brand: Corning Optical Communications
- Model: DEU25G, DEU10G
- User Manual: LAN-3091-AEN
Product Usage Instructions
Trigger Switch
To access the Trigger Switch function:
- Click on DEU.
- Select Function.
- Choose Trigger Switch.
Firmware Update
To view and upgrade firmware:
- Click on Function.
- Select Firmware to view and upgrade firmware info.
Alarm Setting
To set the alarm detect duration:
- Click on Function.
- Select Alarm Setting to configure the DEU alarm detection duration.
Import & Export
To import and export DEU configuration:
- Click on Function.
- Select Import & Export to manage the DEU configuration.
Log Export
To export the log for problem analysis:
- Click on Function.
- Select Log to export the log of DEU for further analysis.
User Information
Password Reset
To reset the DEU password:
- Click on User.
- Select Password to reset the DEU password.
User Info Setup
To add a user and set roles and passwords:
- Click on User.
- Select User Info to add a user, set roles, and passwords.
Login Info Configuration
To set the maximum password entry value:
- Click on User.
- Select Login Info to configure the max value for entering the password.
FAQ
What is the purpose of the Trigger Switch function?
The Trigger Switch function allows users to…
How can I export the log for problem analysis?
To export the log for problem analysis,…
Figure 168. DEU25G Function Reset
Figure 169.DEU 10 G Function Reset
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 128
5.3.2.3 Trigger Switch
Click DEU->Function->Trigger Switch.
Figure 170.DEU 25G–Function–Trigger Switch
Figure 171.DEU 10 G–Function–Trigger Switch
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 129
5.3.2.4 Firmware
Click Function Firmware and the firmware info can be viewed and upgraded.
Figure 172. DEU 25G Function Firmware
Figure 173.DEU 10G Function Firmware
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 130
5.3.2.5 Alarm Setting
Click Function Alarm Setting to set the DEU alarm detect duration.
Figure 174. DEU25G Function Alarm Setting
Figure 175.DEU10G Function Alarm Setting
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 131
5.3.2.6 Import & Export
Import and export the DEU configuration by clicking Function Import & Export.
Figure 176.DEU25G Function Import & Export
Figure 177.DEU 10 G Function Import & Export
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 132
5.3.2.7 Log
Click Function Log to export the log of DEU for problem analysis.
Figure 178.DEU 25G Function Log
Figure 179.DEU 10G Function Log
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 133
5.3.3 DEU -> User Info
5.3.3.1 Password
Click User->Password to reset DEU password.
Figure 180. DEU25G User Password
Figure 181. DEU 10 G User Password
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 134
5.3.3.2 User Info
Click User->User Info to add a user to set the role and password.
Figure 182.DEU25G User User Info
Figure 183.DEU 10G User User Info
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 135
Figure 184.DEU10G/25G User User Info Add User
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 136
5.3.3.3 Login Info
Click User->Login Info to set the max value of entering the password.
Figure 185. DEU25G User Login Info
Figure 186.DEU 10 G User Login Info
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 137
5.3.3.4 Notification
Figure 187.DEU 25G Notification
Figure 188. DEU 10 G Notification
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 138
5.4 dMRU Config
5.4.1 RU -> Overview & Alarm
Click RU to enter the Overview interface and view the current status of RU
alarms (e.g., Link Alarm).
Figure 189.DEU RU Overview
Each alarm is defined as follows: Link Alarm Digital HW ALM Temperature Alarm
Low Transmission Alarm Overflow Alarm DC Voltage Lower Alarm Over Consumption
Alarm Firmware Mismatch Alarm Drag the scroll bar to view more information
(e.g., Low Transmission Alarm) as shown in Figure 190.
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 139
Figure 190.RU Overview More
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 140
5.4.2 dMRU Parameter config
5.4.2.1 RF Info
Click RF Info to read various RF information of RU.
Figure 191. RF Info
SN RU parameter
Range
1
RF Switch
ON/OFF
2
DL ATTN
(0~20) dB
3
UL ATTN
(0~20) dB
4
Work Mode
Normal DL force uplink UL force uplink
5
Delay adjust mode
Auto/Manual
6
Manual Delay Adjust Value
0~50000ns
7
Fan Switch
ON/OFF
8
DL VSWR THR
1.5/2.0/2.5
To configure the RF info 1. Click RU RU 3 to enter the info page.
Default values ON 10 dB 10 dB
Remark
0dB (max power) 0dB (max power)
Normal
Auto 0ns OFF 1.5
2. Click the icon in each field. 3. Select one from the drop-down options (In
the Band of example below, N3500F is selected). 4. For UL ATT, DL ATT, enter
values with the range according to the parameters form above. 5. For RF
Switch, DL VSWR Alarm, Antenna Sense Alarm and PA Alarm, select ON/OFF and
Enable /Disable
button.
6. Click Finish
to complete the settings.
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 141
5.4.2.2 Carrier Info
Figure 192. RF info More
Figure 193.RU Carrier Info
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 142
5.4.2.3 OP Info
The OP Info list box displays the current optical port connection status and
information reading volume of the device.
Figure 194. RU OP Info
Figure 195.RU OP Info More
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 143
5.4.2.4 CPRI Info
5.4.2.5 Other Info
Figure 196.RU–CPRI Info
Figure 197. RU Other info
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 144
5.5 dLRU Config 5.5.1 RU -> Overview &Alarm
Click RU to enter the Overview interface and view the current status of RU
alarms (e.g., Link Alarm).
Figure 198. RU Overview Each alarm is defined as follows: Link Alarm Digital
HW ALM Temperature Alarm Low Transmission Alarm Overflow Alarm DC Voltage
Lower Alarm Over Power Consumption Alarm Firmware Mismatch Alarm Drag the
scroll bar to view more information (e.g., Temperature) .
Figure 199.RU Overview More
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 145
5.5.2 dLRU Parameter config
5.5.2.1 RF info
Figure 200.RF Info Click RU RU1 to read various RF information of RU, as shown in Figure 201.
SN
Parameter
1
RF Switch
2
DL ATTN
3
UL ATTN
4
Work Mode
5
Service off alarm
Range ON/OFF (0~20) (0~20) Normal DL force uplink UL force uplink
Disable Enable
6
MIMO
MIMO 1 MIMO 2
Recommend value ON 10 10
Normal
Enable
Figure 201. RF info
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 146
5.5.2.2 Carrier info
Figure 202.RU Carrier Info
5.5.2.3 OP info
The OP Info list box displays the current optical port connection status and
information reading volume of the device.
Figure 203.RU OP Info
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 147
5.5.2.4 CPRI Info
Figure 204.RU OP Info More
Figure 205. RU-CPRI Info
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 148
5.6 dHRU Config 5.6.1 RU -> Overview &Alarm
Click RU to enter the Overview interface and view the current status of RU
alarms (e.g., Link Alarm).
Each alarm is defined as follows: Link Alarm Digital HW ALM Temperature Alarm Low Transmission Alarm Overflow Alarm Firmware Mismatch Alarm
Figure 206. RU–Overview
Drag the scroll bar to view more information (e.g., Low Transmission Alarm)..
Figure 207. RU-overview–More
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 149
5.6.1 dHRU Parameter config
5.6.1.1 RF info
Click RF Info to read various RF information of RU.
SN RU parameter
1
RF Switch
2
DL ATTN
3
UL ATTN
4
Work Mode
5
Service Off Alarm
6
MIMO
6
Delay adjust mode
7
Manual Delay Adjust Value
8
DL VSWR THR
Figure 208. RF Info Range ON/OFF (0~20) dB (0~20) dB Normal DL force uplink UL force uplink Enable/Disable MIMO1/MIMO2 Auto/Manual 0~50000ns 1.5/2.0/2.5
Default values ON 10 dB 10 dB
Normal
Enable MIMO1 Auto 0ns 2.0
Remark
0dB (max power) 0dB (max power)
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 150
5.6.1.2 Carrier info
Figure 209. Carrier Info
5.6.1.3 OP info
The OP Info list box displays the current optical port connection status and
information reading volume of the device.
Figure 210. OP Info
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 151
5.6.1.4 CPRI Info
Figure 211. OP Info–More
Figure 212. CPRI Info
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 152
5.6.1.5 Other Info
Figure 213. Other Info
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 153
5.7 System Downlink/Uplink Config 5.7.1 Downlink Output Power Config (Power
Sharing Process)
Step 1. Set Carrier Info in Chapter 5.3.1.3, including the operator info,
carrier info. The DL ATTN can be set to default value in power sharing config.
Step 2. Set the power sharing parameters in chapter 5.3.1.4 – Assign each
operator’s power share (percentage). – Select the carrier’s power assignment
mode for each operator (Density /Even). Density mode: power assignment based
on carrier bandwidth. Even mode: power assignment based on the number of
carriers. – Config MIMO 1 and MIMO 2 channel. – Select the calculate button to
active the value, then the DL ATT value in Step 1 will be automatically
calculated. – Select the `Power Share Lock’ button to lock the ATT config. –
The system will automatically emit the output target power based on power
sharing configuration if the DCU input power is within the operation range.
Step 3. Set RIU ATTN to meet DCU input power range according to chapter 5.1.2
– Set RIU high gain mode (ON/OFF) and DL ATTN to suitable value to meet DCU
input operation range.
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 154
Input Base station Base station input power to RIU(PwrB)
37dBm
23~37dBm 23dBm
12~23dBm
Config and result
RIU
RIU high gain mode switch
RIU DL_ATT (manual)
RIU gain
OFF
14
-30-(14) =-44dB
(PwrB- -30dB-RIU
OFF
DL_ATT
OFF
0
-30dB
OFF
0
-30dB
DCU
dxRU
RIU output TO DCU
DCU input power
DCU high gain mode switch
DCU DL_ATT
(AGC auto contral)
corresponding dxRU baseband power
dLRU output power
-7
-7
OFF
-7
-7
OFF
-7
-7
OFF
PwrB – 30 PwrB – 30 ON
0 dB
-14dBfs
0dB
-14dBfs
0dB
-14dBfs
PwrB 30-19= PwrB-11
-14dBfs
Rated power Rated power Rated power
Rated power
12dBm 11dBm 0-11dBm 0 dBm -12 dBm ~0 dBm
-12 dBm
-12 dBm ~-15 dBm
-15 dBm
OFF
0
-30dB
-18dBm -18dBm ON
Rated
1dB
-14dBfs
power
-7dB-11dB
ON
11dB
-7dBm
-7dBm OFF
=-18dB
Rated
0dB
-14dBfs
power
ON
PwrB
-7dB- PwrB -7dBm
-7dBm OFF
Rated
0dB
-14dBfs
power
ON
0
-7dB
-7dBm
-7dBm OFF
Rated
0dB
-14dBfs
power
ON
0
-7 dBm +
-7dB
-7+ PwrB ON
PwrB
-7+ PwrB(-19) =12+PwrB
-14dBfs
Rated power
ON
0
-7 dBm + –
-7+ -12=-
-7dB
12=-19
ON
19 dBm
dBm
-7-12-(19) =0
-14dBfs
Rated power
ON
0
-7dB
-7+ PwrB -7+ PwrB ON
Rated
=-14dBfs-(- power-(-
0dB
12- PwrB)
12-
PwrB)
ON
0
-7dB
-22dBm -22dBm ON
=-14dBfs-(- Rated
0dB
12- (-15))=- power-
17dBfs
3dB
– The DCU input power target is -7dBm, and the RIU suggested input power range is 10~37dBm, so that please config RIU high gain mode and DL ATT according to the input power.
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 155
Input
Config and result
Base RIU
station
Base station input power to RIU(PwrB)
RIU high gain mode switch
RIU DL_ATT RIU (manual) gain
RIU output TO dcu
37dBm
OFF
14
-30-
(14)
-7
=-44dB
23~37dBm OFF
(PwrB-23)
-30dB-
RIU
-7
DL_ATT
DCU
DCU input power
-7
-7
23dBm
OFF
0
-30dB -7
-7
12~23dBm OFF
0
-30dB
PwrB PwrB – 30
30
dxRU
DCU high gain mode switch
DCU DL_ATT
(AGC auto control)
corresponding dxRU baseband power
dLRU output power
Rated
OFF
0 dB
-14dBfs
power
Rated
OFF
0dB
-14dBfs
power
Rated
OFF
0dB
-14dBfs
power
PwrB 30-
-19=
Rated
ON
PwrB-11
-14dBfs
power
12dBm
OFF
0
11dBm
ON
11dB
0-11dBm ON
0 dBm
ON
-12 dBm ON
~0 dBm
PwrB 0 0
-12 dBm ON
0
-12 dBm
ON
0
~-15 dBm
-15 dBm ON
0
-30dB -18dBm -18dBm ON
-7dB11dB -7dBm -7dBm OFF =-18dB -7dB-
-7dBm -7dBm OFF PwrB
-7dB -7dBm -7dBm OFF
-7 dBm +
-7dB
-7+ PwrB ON
PwrB
-7 dBm +
-7+ -12=-
-7dB -12=-19
ON
19 dBm
dBm
-7dB -7+ PwrB -7+ PwrB ON
-7dB -22dBm -22dBm ON
Rated
1dB
-14dBfs
power
Rated
0dB
-14dBfs
power
0dB
-14dBfs
0dB
-14dBfs
-7+ PwrB-(19) =12+PwrB
-14dBfs
Rated power Rated power
Rated power
-7-12-(-19) -14dBfs
=0
Rated power
Rated
=-14dBfs-(-12-
0dB
power-(-
PwrB)
12- PwrB)
Rated
=-14dBfs-(-12-
0dB
power-
(-15))=-17dBfs
3dB
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 156
In this case, please config the DCU to the following config. The detailed config is listed in chapter 5.2.2 High Gain mode = OFF DCU DL ATT changes from 20dB to 0dB after antenna connection. Note: PwrB refers to the base station input power to RIU
5.7.2 Uplink Gain Config
The Total Uplink Gain = -2dB – RIU UL ATT – DCU UL ATT – RU UL ATT Step 1. Config the RIU UL ATT according to chapter 5.1.2 Step 2. Config the DCU UL ATT according to chapter 5.2.2.2 Step 3. Config the RU UL ATT according to chapter 5.4.2.2 The range of each ATT is listed as below.
SN
ATT Range(dB)
Default Value(dB)
1
0~25
20
2
0~20
20
3
0~20
10
Config Description chapter 2.1.2 chapter 2.2.2.2 chapter 2.4.2.2
Corning Optical Communications
User Manual I LAN-3091-AEN I Page 157
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>