VEVOR 1998-2009 Car Cover Motorcycle Shelter Installation Guide
- June 9, 2024
- VEVOR
Table of Contents
VEVOR 1998-2009 Car Cover Motorcycle Shelter
Congratulations on purchasing the latest version of Motor Tent that is designed to keep your ride clean and safe.
The Motor Tent comes partially assembled, so it takes only minutes to
complete.
Start by checking the various components listed in the right chart to
familiarize yourself with the parts and make sure that you have all of them.
Assembly
Step I
Lay assembly A on your right and B on your left with the shortest tubes
pointing in front of you and ribs laying fanned out on the
floor.
step 2
Connect the E tubes on to the A&B parts with angled ends on upper rib using
F,G & H fasteners. 
step3
Connect D. Then lift the assemblies with all ribs and connect Cacross the A &
B frames. Leave the last C tube uninstalled for this step as the picture
shows.
Step 4
Check to ensure that the tent cover is spread in the right direction.
Let the 2 unconnected tubes pass through ground sleeves of the cover.
Step 5
Let the last C tube pass through the ground sleeve of the and connect it with
assembly A and B.
Step 6
Fold the cover backwards over the frame, wrap the velcros around the ribs as
appropriate, and tidy up the whole tent.
Secure the frame
Weights can be placed on the fiat bar connected to the D plate. Bolts can be
used to fasten the swivel plates Of A & B to concrete or other firm surface.
Fold Down and Storage
The Motor tent is designed to fold down for storage as needed. While the Motor
tent is still fully assembled, remove the bolts for the A frame and take out
the H tubes. The Motor tent can then collapse closed pivoting on the A and B
base assemblies. Tie the ribs together at the top and then you can easily move
it around.
We wish you many years of quality motorcycle storage with your Motor Tent.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>