VEVOR M4820L 48 Inch Wood Worktop Workbench User Manual
- June 9, 2024
- VEVOR
Table of Contents
VEVOR M4820L 48 Inch Wood Worktop Workbench
INSTALLATION PREPARATION
- Two or more people to move and assemble the workbench.
- Please prepare a carpet or mat to protect your floor you need to spread out all the accessories.
- Please prepare gloves to avoid being scratched by sharp parts that may occur during installation.
- Please open all the boxes to check that the accessories are complete andin good condition (The accessories list on page 3).
- the box contains some small components, please place them properly before installation to keep them away from kids and ensure safety.
- If you need to use power tools to install this product, please set the speed to low speed in advance.
- When installing please align all the holes and do not tighten all the screws first, otherwise, it may make the installation difficult.
ACCESSORIES LIST
Kindly Notes:
- Please open all boxes to check the quantity and condition of accessories.
- When installing, please align all the holes and do not tighten all the screws first.
- Is there any broken or missing part?
If yes, please feel free to contact us, we will do our best to assist you to solve the problem as soon as possible.
- Is there any broken or missing part?
PRODUCT INSTALLATION INSTRUCTION
- How to solve the hole misalignment?
Please do not tighten all the screws until aligning all the holes.
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us: CustomerService@vevor.com This is the
original instruction, please read all manual instructions carefully before
operating. VEVOR reserves clear interpretation of our user manual. The
appearance of the product shall be subject to the product you received. Please
forgive us that we won’t inform you again if there is any technology or
software updates on our product.
E-mail: CustomerService@vevor.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>