ULTIMEA U0320 1080P Apollo P40 Full HD Projector User Guide
- June 9, 2024
- ULTIMEA
Table of Contents
ULTIMEA U0320 1080P Apollo P40 Full HD Projector
FULL HD PROJECTOR QUICK START GUIDE
WEARE READY TO HELP
Prefer video tutorial?
Setup guidance video and User Manuals on UL TIMEA website.
IMPORTANT
Before using the projector, make sure you read these instructions and the safety instructions in the online User Manual. Your product may differ from the illustrations on this sheet, but the instructions are the same.
Note
Due to HDCP protocol, Netflix, Amazon Prime and similar services can not be
played by the projector wirelessly. Please use a Fire TV stick, Roku stick or
Chromecast TM (not included) and connect it to the projector to use their
streaming services.
ACCESSORIES LIST
Product
Remote Control
Quick Setup
Power On / Power Off
Plug in the AC power cord, click the power button on the operation panel of
the machine or on the remote control and the projector will start to work.
Projector Installation
You can choose horizontal placement or hanger installation.
The projection screen can be played from 35″ to 150″. The recommended projection screen is 50″ to 100″. Ambient darkness will improve the clarity of the projected images.
Adjust the Image Projected On the Screen
Check the horizontal and vertical settings of the screen.
WiFi Settings
-
Click the settings icon on the homepage to enter the projector settings.
-
Select “WiFi” and click “OK” to confirm.
-
The network list will appear after searching for the network. Select the wireless network that needs to be connected and press the
“OK” button to confirm. -
Click the connect button after entering the password
BT Settings
- Click the settings icon on the homepage to enter the to projector settings, select the “BT” click “OK” button to confirm.
- Turn on BT and select the BT signal that needs to be connected.
Screen Mirroring
- Move the projector cursor to Air Play on the homepage, select Air Play and click the “OK” button.
Note: Make sure that the projector and mobile phone are connected to the same network.
- The operation steps of the mobile phone are as follows:
No setting is required on the projector
Wired Connection to Devices
How to connect the Fire TV stick to the projector:
- Connect the TV stick to power using the USB cable.
- Plug the stick to the HD port on the projector.
- Select the HD option in the settings on the projector. The content of the Fire TV stick will be displayed on the projection screen. Use the Fire stick’s remote to select and stream your content.
Multimedia Channel
After inserting the USB, select the movie, music, pictures or office file
according to the type of file you need to play and enter the corresponding
playback menu.
Step 1 : Open the Control Center and tap the Screen Mirroring on your iOS
device.
Step 2 : Select the device U0320 to be cast from the searched devices.
For Android Device
-
Move the projector cursor to Miracast on the homepage, select Miracast and click the “OK” button. ULTIMEA ~ II(]@.
-
Turn on the Android device, enter phone settings to find “Device Connectivity”, click on “Wireless Display”, search for U0320 of the projector and select U0320. Make sure that the projector and Android device are connected to the same network.
Note
Due to HDCP protocol, Netflix, Amazon Prime and similar services can not be
played by the projector wirelessly. Please use a Fire TV stick, Roku stick or
Chromecast TM (not included) and it connect to the projector to use their
streaming services.
HD Channel
Use an HD cable to connect the projector with a computer, game console, set-
top box and other devices that support HD output and select HD option in
settings.
AV Channel
Multimedia Channel
After inserting the USB, select the movie, music, pictures or office file
according to the type of file you need to play and enter the corresponding
playback menu.
7 BT Speaker Mode
Turn on the projector and enter the homepage, use the remote control to select
the BT speaker and press the “OK” button. The display will show BT speaker
mode and enter ‘waiting to pair’. You can connect to the projector (Name:
BT-U0320) through the BT settings of the mobile device.
To use the projector function, press the return button to exit BT speaker
mode. Now the machine will turn on and enter projector mode.
Enjoy your new projector
Documents / Resources
|
ULTIMEA U0320 1080P Apollo P40 Full HD
Projector
[pdf] User Guide
U0320 1080P Apollo P40 Full HD Projector, U0320, U0320 Apollo P40 Full HD
Projector, 1080P Apollo P40 Full HD Projector, Apollo P40 Full HD Projector,
1080P Full HD Projector, Apollo P40, P40 HD Projector, Apollo HD Projector,
Projector, Full HD Projector
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>