DESERT STEEL 9878 LED Lighting Instruction Manual
- May 15, 2024
- DESERT STEEL
Table of Contents
DESERT STEEL 9878 LED Lighting
Specifications
- Product Name: LED Lighting Manual
- Brand: Desert Steel
-
Step 1: Setup
Pull the cable out of the Saguaro arm(s) and split the cable at the connection point. Ensure the cable is placed in the grooves securely. -
Step 2: Securing the Connection
Tighten the cap nut to allow the pin to pierce the cable for a secure connection. -
Step 3: Wiring
Strip the light wire about 1/4 inch and pass it through the pipe nut. -
Step 4: Final Assembly
Place the wire into the hole with the core and tighten the pipe nut to secure the wiring in place. -
Step 5: Testing
Pull the wire gently to check the connection and ensure it is properly set up.
FAQ
-
Q: What should I do if the light does not turn on after following the instructions?
A: If the light does not turn on, first check the power source and ensure all connections are secure. If the issue persists, please contact our customer support for further assistance. -
Q: Can I install these lights outdoors?
-
A: Yes, these LED lights can be installed outdoors, but make sure they are protected from direct exposure to harsh weather conditions to prolong their lifespan.
LED Lighting Manual
-
Pull cable out of Saguaro arm(s). Split cable at connection point, place in grooves.
-
Tighten cap nut.
The pin will pierce the cable. -
Strip the light wire 1/4” and pass it through the pipe nut.
-
Place wire into the hole with core and tighten pipe nut.
-
Pull wire to check connection.
DESERT STEEL