KEESON RF396C Remote Control User Manual
- June 6, 2024
- KEESON
Table of Contents
LEESON RF396C Remote Control User
| Issue Department：Bedding Division| Date：| 2021-12-11
---|---|---|---
System Instruction| Author：|
|
User Manual of RF396C| Edition：| 1.0
Page 1 of 5
Item
-
Child Lock 1
Click the Child Lock button for 3 second to lock or unlock the remote. -
Bed lamp 2
Click the bed lamp button to open or shut the light under the bed. -
Antisnore 3
Click the Antisnore button, the bed moves to Antisnore position, press and hold Antisnore button for 5s, until backlight flashes, the control set the current position as Antisnore position -
TV 4
Click the TV button, the bed moves to TV position, press and hold TV button for 5s, until backlight flashes, the control set the current position as TV position. -
LUMBAR UP 5
Press and hold the LUMBAR UP button, Lumbar actuator moves out, stop when released. -
LUMBAR DOWN 6
Press and hold the LUMBAR DOWN button, Lumbar actuator moves in, stop when released. -
M1 7
Click the M1 button, the bed moves to M1 position, press and hold M1 button for 5s until backlight flashes, the control set the current position as M1 position -
M2 8
Click the M2 button, the bed moves to M2 position, press and hold M2 button for 5s until backlight flashes, the control set the current position as M2 position -
HEAD-UP 9
Press and hold HEAD UP button, head actuator moves out, stop when released. -
HEAD DOWN 10
Press and hold HEAD DOWN button, head actuator moves in, stop when released. -
FOOT UP 11
Press and hold FOOT UP button,foot actuator moves out, stop when released. -
FOOT DOWN 12
Press and hold FOOT DOWN button, foot actuator moves in, stop when released. -
ZG 13
Click the ZG button, the bed moves to zeroG position, press and hold zeroG button for 5s until backlight flashes, the control set the current position as zeroG position -
HEAD MASSAGE 14
Click the HEAD MASSAGE button, head massage motor switches massage intensity, massage intensityswitches among 0-1-2-3； -
MASSAGE model 15
Click the MASSAGE MODEL button to change the massage model. -
FOOT MASSAGE 16
Click the FOOT MASSAGE button, foot massage motor switches massage intensity, massage intensityswitches among 0-1-2-3 -
FLAT 17
Click the FLAT button, the bed goes flat.
FCC
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
ISED RSS Warning
This device complies with Innovation, Science and Economic Development Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. brouillage est susceptible d’en compromettre le fonctionnement.
ISED RF exposure statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.The device has been evaluated to meet general RF exposure requirements.