FLINQ 2.0 Premium Bath Bucket User Manual

FLINQ 2.0 Premium Bath Bucket

Product Information

• The FlinQ Bath Bucket 2.0 is a premium quality product designed to make bathing fun and easy. Its dimensions are 932 mm x 522 mm x 640 mm and it weighs around 5 kg per set. The Bath Bucket has a water capacity of 165 L and is made of durable PP plastic material.
• It requires 2 x LR44 / 2 x AG13 batteries to operate.
• The Bath Bucket comes with several accessories including a water drain pipe, water plug and water pipe joint, hanging basket, anti-skid cushion, and small bailer. It also features an electronic thermometer that displays the water temperature after the battery insulation sheet is removed.

Product Usage Instructions

Before using the FlinQ Bath Bucket, read through the entire instruction manual carefully.

Installation Steps

1. Place the water plug on the inside and the water pipe joint on the outside of the Bath Bucket.
2. Connect the drain pipe to the outside joint.
3. Place the anti-skid cushion inside the Bath Bucket.
4. Place the hanging basket on the side of the Bath Bucket.
5. Pull out the battery insulation sheet of the electronic thermometer to display the water temperature.

Usage Tips

• When using warm water, maintain a temperature between 37 and 38 degrees Celsius to avoid scalding.
• Fill the Bath Bucket with water up to about half or two-thirds of its height to prevent spillage when getting in.
• After bathing, open the drain plug to let the water flow out.
• Do not pour out any remaining water from the end with the electronic thermometer.
• The button batteries can last for about a year. When they run out, replace them with LR44 or AG13 battery models.

Instructions

• Read through this entire instruction manual before using the new version FLINQ Bath Bucket.
• We’re dedicated to bring you well-designed products that make bathing fun and easy

Specifications

• Brand: FlinQ
• Model: Bath Bucket Premium
• Size: 932 mm x 522 mm x 640 mm
• Weight: About 5 kg per set
• The capacity of water: 165 L
• Materials: PP plastic
• Battery: 2 x LR44 / 2 x AG13

Accessories

• 1x water drain pipe
• 1x water plug and water pipe joint
• 1x hanging basket
• 1x anti-skid cushion
• 1x small bailer

Installation steps

1. Put the water plug on the inside and the water pipe joint on the outside.
2. Connect the drain pipe on the outside joint.
3. Place the anti-skid cushion in the bath
4. Place the hanging basket on the side of Bath Bucket
5. Pull out the battery insulation sheet of the electronic thermometer, then the temperature will be displayed.

Attention

1. When putting in warm water, the recommended temperature is between 37 and 38 degrees Celsius to avoid scalding. Keep water about 1/2 or 2/3 height of bath bucket to avoid spillage after getting in.
2. When you are done bathing, open the drain plug and the water will fl ow out. If there is some water left in the bucket, please do not pour it from the end which has the electronic thermometer.
3. The button batteries can last for about a year. When the batteries run out, they can be replaced. The battery model is LR44 or AG13.

• FlinQ Commerce
• Eemweg 74, 3755 LD Eemnes
• www.flinqproducts.nl
• For support and warranty information:info@flinqproducts.nl

References

• FlinQ Products | Gratis verzending | 2 jaar garantie | Betaal later

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>