MB QUART NHT2-116 Nautic 6.5 Inch Compression Horn Tower Speakers Installation Guide
- June 9, 2024
- MB QUART
Table of Contents
NAUTIC NAUTIC
Quick Start
Installation Guide
NHT2-116
NHT2-120
Congratulations on your choice of a MB Quart speaker. This “Quick Start”
Installation guide is meant to help you complete a basic installation. For
more detailed information on system setting, speaker and subwoofer website at
mbquart.com
CAUTION
Always consider consulting a professional audio installer before installing
new speakers. Many manufacturers locate speakers behind interior panels that
require special tools to remove. Be careful and take your time.
If you are using the speaker wire supplied with your new speakers make sure
that you run the speaker wires only through safe areas. Do not let speaker
wire make contact with metal edges or hot engine components.
Dimensions
**Before you start
**
It’s a good idea to confirm that you have purchased the correct size speakers to fit your application. If you have any reservations about being able to complete the installation yourself, we recommend contacting a professional.
Mounting Location
Choose a suitable mounting location
The NHT2 clamping system is designed for towers and support structures that
utilize ROUND work with this clamp. The NHT2 clamp can be used with tube
diameters from 1.5” up to 2.75”. Included are separate bushing sets for all
tube sizes at 1/8” increments. Refer to the table below
Tube Diameter| Tube Circumference| Clamp| Top Bushing|
Bottom Bushing
---|---|---|---|---
2.| 5.| A| 1.50| 1.50
t625| 5.10| A| 2.| 2.
2.| 5.50| A| 2.| 2.
2.| 6.| A| none| 2.
2| 6.| B| 2.00| 2.00
2.| 7.| B| 2.| 2.
2.| 7.| B| 2.| 2.
2.| 7.| B| 2.| 2.
3.| 8.| B| 2.50| 2.50
3.| 8.| B| 3.| 3.
3.| 9.| B| none| none
Wiring
Route signal and illumination wires
Carefully select a route for the audio signal that the wire is in good
shape and not shorted. In the case of an illuminated model, route a positive
and negative wire from aswitched +12V source. Avoid routing wires through
dangerous areas.
Black ……………………………….. Audio signal negative
Black w/white stripe ……………. Audio signal positive
Grill alignment
Adjust the speaker alignment
Your NHT2 speakers can be aligned to “hang straight” on an angled tube by
loosening, rotating and re-mounting the speaker. Just behind the speaker
mounting holes is a series mounting holes that can be used to align the
speaker in the pod.
WARRANTY
Maxxsonics, LLC. warrants this product, to the original consumer purchaser, to
be free from defects in material and workmanship for a period of one (1) year
from the date of purchase.
Maxxsonics, LLC. will, at it’s discretion, repair or replace defective
products during the warranty period. Components that prove to be defective in
materials and workmanship under proper installation and use must be returned
to the original authorized Maxxsonics, LLC. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product
being returned. The costs associated with removal, re-installation and freight
are not the responsibility of or consequential damages connected therewith. To
view the full warranty, please visit the website.
MB Quart products are designed and engineered in the USA
bywww.maxxsonics.com
MBQ NHT2-116/NHT2-120 QSG 01 – rev1
MBQuart.com
*MUSIC DEFINED
References
- MB Quart | Music. Defined. | Premium Performance Audio Store
- Maxxsonics | Powered by Maxxsonics. | Audio Stores Online