AUDIBAX Monster Beam 7R Moving Head Light User Manual

: June 9, 2024
: AUDIBAX

Table of Contents

References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AUDIBAX Monster Beam 7R Moving Head Light User Manual

AUDIBAX Monster Beam 7R Moving Head Light User Manual

DATA SHEET

Brand: Audibax
Product Name: Monster Beam 7R
ID: 10118263
EAN: 656272253394
Category: Lighting Moving Heads
Lamp Type: Discharge
Power: 230W
Rotating gobos: Yes
Number of Gobos: 17
Fixed Gobos: Yes
Battery Operation: No
Exterior Use: No
Color Mix: CW
Motorized Zoom: No
Housing Color: Black
Connections: 3 Pin XLR
Motorized Focus: No
Prism: Yes
Iris: No
Number of LEDs: 0
Effect: No
IP protection: IP20
Wireless Control: No
DMX control: Yes
Color Temperature: 8001 K
Opening Angle: 8º
Number of Color Wheels: 1
Height: 56 cm
Width: 46.5 cm
Depth: 39 cm
Weight: 22.6 kg

WELCOME TO AUDIBAX

Thank you very much for choosing Audibax. We hope you enjoy your new product.

It has been developed and designed paying attention to the smallest details, with quality control with European standards supervised by our great team of professional technicians, who work every day to offer our customers the best quality.

We make sure that every Audibax product is built to last long. All our references are made with long lasting materials and our specialists are dedicated to constantly doing quality controls to guarantee the best result.

Please read carefully this manual in order to use your Audibax product in the best way.
Do not hesitate to visit our website for further information: www.audibax.com

SAFETY INSTRUCTIONS

GENERAL INFORMATION

It is important to read and follow the instructions carefully.
Keep all information and instructions in a secure location.
Always follow the instructions provided.
Take note of all safety warnings and never remove them from the equipment.
Use the equipment only as intended and for its intended purpose.
Ensure that the stands and/or mounts used are sufficiently stable and compatible for fixed installations. Wall mounts should be properly installed and secured, and the equipment should be installed securely to prevent falls.
When installing the equipment, be sure to observe the relevant safety regulations in your country.
Do not install or operate the equipment near sources of heat, such as radiators, heat registers, or ovens, and ensure that it is always cooled sufficiently and cannot overheat.
Do not place sources of ignition, such as burning candles, on the equipment.
Keep ventilation slits unobstructed.
For equipment designed for indoor use only should not be used near water, flammable materials, fluids, or gases. Special outdoor equipment should be used in accordance with the manufacturer’s instructions.
Ensure that no dripping or splashed water can enter the equipment and do not place containers filled with liquids on the equipment.
Prevent objects from falling into the equipment.
Use the equipment only with recommended accessories intended by the manufacturer.
Do not attempt to open or modify the equipment.
Check all cables after connecting the equipment to prevent accidents or damage due to tripping hazards.
During transport, take steps to prevent the equipment from falling and causing damage or injury.
If the equipment is not functioning properly, fluids or objects have gotten inside, or is otherwise damaged, switch it off immediately and unplug it from the power outlet (if applicable). Only authorized, qualified personnel should repair the equipment.
Clean the equipment with a dry cloth.
Comply with all applicable disposal laws and separate plastic and paper/cardboard during packaging disposal.
Keep plastic bags out of the reach of children.

FOR DEVICES DESIGNED TO BE CONNECTED TO THE MAIN POWER SUPPLY:

ATTENTION: If your equipment has a power cord with a grounding plug, it must be connected to a wall outlet with a ground connection. Never remove the grounding plug from the power cord.
If your equipment has been exposed to extreme temperature changes, allow it to reach room temperature before turning it on. Otherwise, moisture and condensation may damage the equipment.
Before plugging in the equipment, make sure that the voltage and frequency of the power outlet match the specifications of the equipment. If the equipment has a voltage selector, only connect it to the power outlet if the values match. If the power cord or adapter does not fit your outlet, contact an electrician.
Do not step on the power cord. Make sure it is not pinched at the outlet, adapter, or equipment connection.
Keep the power cord or adapter within reach and disconnect the equipment from the power supply when not in use or when cleaning it. Always unplug the cord or adapter by pulling the plug or adapter, not the cord. Never touch the cord or adapter with wet hands.
Avoid frequently turning the equipment on and off, as this can reduce its useful life.
IMPORTANT: Only replace fuses with those of the same type and rating. If a fuse repeatedly blows, contact an authorized service center.
To completely disconnect the equipment from the power mains, unplug the power cord or adapter from the outlet.
If your device has a Volex power connector, the mating Volex connector must be unlocked before it can be removed. Be careful when laying cables, as the equipment can slide or fall if the power cord is pulled.
Unplug the power cord or adapter before an extended period of disuse or in case of lightning strike risk.
Only install the equipment when it is disconnected from the power source.
To prevent damage and overheating, qualified personnel should regularly clean and service the equipment depending on ambient conditions like dust, nicotine, and fog.

If the product contains the following symbols, please, read carefully:

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an electrical shock.

The warning triangle with exclamation mark indicates important operating and maintenance instructions.

IMPORTANT INFORMATION

WARNING! IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS

This product is specifically designed for use in event technology and is not intended to be used as household lighting.
It is important to avoid looking directly at the light beam, even for a short period of time.
Optical instruments, such as magnifiers, should not be used to look directly at the beam.
If you are sensitive to strobe effects, it is possible that they could cause an epileptic seizure. If you have epilepsy, it is important to avoid places where strobe lights are being used.

PACKAGE CONTENT

1 x Monster Beam 7R
1 x Power Cord
2 x Brackets
1 x User’s manual

PRODUCT DESCRIPTION

Colour: 14 colors + white
Gobo: 17 fixed gobo + white
Prism: 8-facet prism rotation, bilateral rotation, with focus
Lens: high precision optical lens
Dimmer: linear dimmer 0-100%
Strobe: 1-12 times/s double strobe
Touch screen
Super silent motor
Control mode: Auto / Sound / DMX / Master-slave
DMX: 16/20CH
Protection class: IP20
100-240VAC / 50-60HZ
Rated power 500W
Lamp: OSRAM 7R 230W
Color temperature 8000K
Average life 2000 Hours

USING THE BUTTONS

AUDIBAX Monster Beam 7R Moving Head Light - USING THE
BUTTONS

TECHNICAL SPECIFACTIONS

The two buttons on the top right are used to choose the language and screen rotation.
There are 4 buttons at the bottom of the screen: Settings, Information, Manual control button, Advanced.

MAINTENANCE

The optical parts must be cleaned very carefully. Do not use abrasive solvents as they will damage the plastics and lens coatings.

After turning off the equipment, let it cool down completely, then proceed to open the casing.
Using a blower or vacuum, remove dust and foreign objects, proceed carefully.
Use neutral paper or a clean cotton cloth moistened with distilled water to remove small particles. Take care not to scratch delicate surfaces. Use compressed air first.
Use neutral tissue paper moistened with alcohol to remove traces of dust or residue. You can also use glass cleaner, but you must remove the residue with distilled water, in a circular motion from the center. Then wipe with a soft cotton cloth.
Using a soft brush, cotton paper, air cleaners, or a hair dryer, you can remove dirt from the fans. Please note that excessive dirt, caused by abnormal use, may void the warranty

DISPOSAL

Packaging:

The packaging can be recycled using standard disposal methods and reintroduced into the reusable material cycle.
Please follow the laws and regulations regarding disposal and recycling of packaging in your country

Device:

This device is subject to the Waste Electrical and Electronic Equipment (WEEE) Directive of the European Union. Used appliances should not be disposed of with household waste. Used device must be disposed of through an approved disposal company or a municipal disposal facility.
Please comply with the applicable regulations in your country.
Please follow all the disposal laws and regulations in your country.
As a customer, you can obtain information on environmentally-friendly disposal options from the product seller or the appropriate regional authorities.

DMX

Configuration button (Settings):

$AUDIBAX Monster Beam 7R Moving Head Light - Configuration button $Settings$$