MONACOR PDM-300 Desk Microphones Instruction Manual
- June 9, 2024
- MONACOR
Table of Contents
PDM-300 Desk Microphones
Instruction Manual
PDM-300
PDM-302
PDM-302 PTT
Bestell-Nr. • Order No. 0231200
Bestell-Nr. • Order No. 0235560
Bestell-Nr. • Order No. 1000609
PDM-300 Desk Microphones
THE AUDIO COMPANY THE AUDIO COMPANY THE AUDIO COMPANY THE AUDIO COMPANY THE AUDIO COMPANY THE AUDIO COMPANY THE AUDIO COMPANY THE AUDIO COMPANY
PA Desk Microphone
These instructions are intended for users without any specific technical
knowledge. Please read these instructions carefully prior to operation and
keep them for later reference.
Applications
This desk microphone has especially been designed for PA systems. It is suitable for all applications which require a stable desk microphone for announcements, lectures, etc.
Important Notes
The microphone corresponds to all relevant directives of the EU and is
therefore marked with .
The microphone corresponds to the relevant UK legislation and is therefore
marked with UKCA.
- The microphone is suitable for indoor use only. Protect it against humidity and heat (admissible ambient temperature range 0 – 40 °C).
- For cleaning only use a dry, soft cloth; never use chemicals or water.
- No guarantee claims for the microphone and no liability for any resulting personal damage or material damage will be accepted if the microphone is used for other purposes than originally intended, if it is not correctly operated, or if it is not repaired in an expert way.
If the microphone is to be put out of operation definitively, dispose of the microphone in accordance with local regulations.
Connection
Model PDM-300 with 6.3 mm plug is designed for connection to an unbalanced
microphone input; models PDM-302 and PDM-302PTT with XLR plug are designed
for connection to a balanced microphone input. Connect the desk microphone via
its cable to the corresponding microphone input of the amplifier or mixer.
Operation
4.1 PDM-300 and PDM-302
The microphone is switched on and off via its toggle switch:
- For short announcements, keep the switch pressed upwards (will not engage) and speak into the microphone. After the announcement, release the switch so that it returns to misposition (microphone off).
- For longer announcements, set the switch to the lower position (will engage) and speak into the microphone. To switch off the microphone after the announcement, set the switch to mid-position.
4.2 PDM-302PTT
Keep the PUSH TO TALK button pressed while an announcement is being made.
Specifications
5 Specifications
System:…………………………………… dynamic, cardioid
Frequency range: …………………….. 60 – 12 000 Hz
Sensitivity: ……………………………….3.2 mV/ Pa at 1 kHz
Impedance: ………………………………600 Ω Connection (plug; cable length)
PDM-300: ………………………………. 6.3 mm plug, unbale.; 1 m
PDM-302: ………………………………… XLR, Bal.; 5 m
PDM-302PTT: ………………………….. XLR, bal.; 4.8 m
Dimensions: ……………………………….. console housing 120 × 60 × 160 mm, gooseneck length
310 mm
Subject to technical modification.
WWW.MONACOR.COM
© MONACOR INTERNATIONAL
All rights reserved
A-0848.99.06.01.2023
MONACOR INTERNATIONAL GmbH & Co. KG
Zoom Felsch 36, 28307 Bremen
Germany
****Importer: Epic Audio Ltd, Unit 9 Apollo Park
Station road, Long Buckby, NN6 7PF
United Kingdom, Company Registration: 13878247
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>