ALOGIC Matrix Universal Wireless Car Charger User Manual

Matrix Universal Wireless Car Charger
User Manual

Matrix Universal Wireless Car Charger

MATRIX MAGNETIC WIRELESS CHARGER
WITH CAR MOUNT

Package Contents

Specifications

Model| MSCCM
MSCCMWH
---|---
Dimensions| 103 x 75 x 65mm (H x D x W)
Weight| 122g
Output| MagSafe Wireless Qi Charging
5W/7.5W/10W/15W
Input| USB-C PD 20W
Power| 15W Max
Warranty| 2 Years

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Responsible Party – U.S. Contact Information
ALOGIC USA LLC
37524 Marsten DR
Newark CA 94560 USA
EU Declaration of Conformity
Hereby, ALOGIC Corporation declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the
following internet address by clicking on the Compliance Documentation link: www.alogic.co
Designed in Australia. Manufactured in China

Operating Instructions

(Refer to the images on the previous pages)
Device Set Up

1. Loosen the nut 10 by turning it anti-clockwise and connect the Ball Joint 7 of the mount.
2. Fasten the nut 10 by turning it clockwise to tighten.
3. Loosen Locking Knob 8 by turning it anti-clockwise and adjust the Hook 9
4. Push the Hook 9 forward into the air vent outlet of the car and fasten it with the Locking Knob 8
   

* Windshield/ Dashboard Mount
(Optional – Sold separately – MSCWCM)
4a. Windshield Installation option
Choose a location on the windshield and wipe any dust or debris from the surface. Press the suction cup firmly. Move the latch to the lock position to establish a firm seal between the mount and the windshield. The mount can also be used on a flat surface on the dashboard by following the same steps.Connect the available USB-C angle cable to the USB-C port 6 on the Car Mount Cradle. Connect the other end to the USB-C port of your car charger or port.
Most USB ports in cars don’t have enough power output to support wireless charging at full speed. Please use a port or charger with at least 20W output.
* 12V plug in car charger is sold separately.
Insert the Wireless Charging Pad into the Car Mount Cradle.
Matrix 5000mAh Wireless Power Bank (Sold Separately – MSPB5K)
** The Matrix MagSafe Power Bank
5000mAH Wireless Charger (sold separately) can replace the Wireless
Charging Pad. Please refers to the Matrix Ecosystem Brochure.

Charging MagSafe Wireless Devices
Mount your MagSafe-enabled device by placing it on the centre of the MagSafe Wireless Charging Base. The integrated magents will align the phone with the charger

Troubleshooting

roughly with the MagSafe outline.
• Ensure that your device supports MagSafe or Qi wireless charging.
• Most USB ports in cars don’t have enough power output to support wireless charging effectively. Please use a port or charger with at least 12W output.
Wireless device stops charging before fully charged| • Thick cases can interfere with wireless charging. Please make sure your case is MagSafe compatible.
• Most USB ports in cars don’t have enough power output to support wireless charging effectively. Please use a port or charger with at least 12W output.

Warnings

• This device uses inductive charging. Do not place metallic objects (aside from devices which support wireless charging) on top of the charging pad.
• Avoid placing phone cases which include metallic portions on the charger. In rare cases it may not be possible to detect smaller metallic objects, such as foil logos on phone cases, and the charger may continue to operate. In these cases, the metallic object will heat up and may cause damage to the device being charged over time.
• This device is designed for indoor use only.
• Do not deliberately damage the device or expose it to damp, direct sunlight, or high temperature conditions.
• It is normal for the device to be slightly warm to touch during operation. Provide adequate ventilation and do not cover the device while in operation.
• Disassembling or failing to properly use and care for your device will void the warranty on the product.
• Do not use the product if it is damaged as this could pose a risk of causing damage to connected devices.
• ALOGIC bears no responsibility for damage to the device or incidental damages arising from improper use or lack of care. ALOGIC will not be held liable for repair or replacement of the device or other damages in these circumstances.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>