KLEIN TOOLS 54802MB MODbox Rolling Toolbox User Manual
- June 9, 2024
- KLEIN TOOLS
Table of Contents
Handle Operating Instructions: MODbox™ Rolling Toolbox 54802MB
User Manual
To Remove the Telescoping Handle
STEP 1: While facing the backside of the Rolling Toolbox, collapse the
handle by depressing the orange button.
STEP 2: Use your index finger and thumb to pull each of the two black
tabs located on each of the arms of where the telescoping handle meets the
box. Tabs should be pulled until a red indicator reading, “Unlocked” is
visible.
STEP 3: Using the center cross brace of the handle, pull up on the handle
assembly until it slides out of the receiving slots in the rolling box. Note:
if toolbox is empty, you may need to brace it with your foot on the back
stowage ledge while pulling up the handle.
To Reattach the Telescoping Handle
STEP 1: Slide the telescoping arms back into their respective slots until
fully seated. Ensure the correct side of the handle is facing out. The orange
button will be visible from the back.
STEP 2: Use the palm of your hand to push both black tabs back into
place, until the red “Unlocked” is no longer visible.
STEP 3: Pull up on the handle until fully extended and handle locks into
place.
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street, Lincolnshire, IL 60069
1-800-553-4676
customerservice@kleintools.com
www.kleintools.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>