KLEIN TOOLS 935DAF Digital Angle Finder Instructions
- May 15, 2024
- KLEIN TOOLS
Table of Contents
KLEIN TOOLS 935DAF Digital Angle Finder
Product Information
The Klein Tools 935DAF is a Digital Angle Finder designed to measure angles and calculate the saw blade angle required for precise miter cuts. The locking knob ensures the rulers are securely positioned for efficient angle transfer.
Specifications:
- Model: 935DAF
- Functionality: Digital Angle Finder
- Features: Locking knob for ruler positioning, IP54 rated
- Based on: 1390613 Rev 04/23 A
Product Usage Instructions
Step 1: Power On
Press the power button to turn on the Digital Angle Finder.
Step 2: Measurement
Place the tool on the surface to be measured and adjust the rulers to align
with the angles you need to measure.
Step 3: Locking Position
Once the rulers are in the correct position, use the locking knob to secure
them in place for accurate angle transfer.
Step 4: Reading Angle
Read the displayed angle on the digital screen for precise angle measurement.
Frequently Asked Questions (FAQ)
Q: Is the Klein Tools 935DAF waterproof?
A: The Klein Tools 935DAF is rated IP54, indicating it is protected
against dust and water splashes.
Q: Can I measure both interior and exterior angles with this tool?
A: Yes, the Digital Angle Finder can measure both interior and exterior
angles accurately.
COMPOUND MITER CONVERSION TABLE
| MITER ANGLE FROM DAF| 1| 2| 3| 4|
5| 6| 7| 8| 9| 10| 11| 12| 13|
14| 15| 16| 17| 18| 19| 20| 21|
22| 23| 24| 25| 26| 27| 28| 29| 30
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
38° – 52° CROWN| MITER ANGLE| 0.6| 1.2| 1.8|
2.5| 3.1| 3.7| 4.3| 4.9| 5.6| 6.2| 6.8|
7.5| 8.1| 8.7| 9.4| 10.0| 10.7| 11.3|
12.0| 12.6| 13.3| 14.0| 14.6| 15.3| 16.0|
16.7| 17.4| 18.1| 18.8| 19.6
BEVEL ANGLE| 0.8| 1.6| 2.4| 3.2| 3.9|
4.7| 5.5| 6.3| 7.1| 7.9| 8.6| 9.4|
10.2| 11.0| 11.8| 12.5| 13.3| 14.1| 14.9|
15.6| 16.4| 17.2| 17.9| 18.7| 19.5| 20.2|
21.0| 21.7| 22.5| 23.2
45° CROWN| MITER ANGLE| 0.7| 1.4| 2.1|
2.8| 3.5| 4.3| 5.0| 5.7| 6.4| 7.1| 7.8|
8.5| 9.3| 10.0| 10.7| 11.5| 12.2| 12.9|
13.7| 14.4| 15.2| 15.9| 16.7| 17.5| 18.2|
19.0| 19.8| 20.6| 21.4| 22.2
BEVEL ANGLE| 0.7| 1.4| 2.1| 2.8| 3.5|
4.2| 4.9| 5.6| 6.4| 7.1| 7.8| 8.5| 9.2|
9.8| 10.5| 11.2| 11.9| 12.6| 13.3| 14.0|
14.7| 15.4| 16.0| 16.7| 17.4| 18.1| 18.7|
19.4| 20.0| 20.7
| MITER ANGLE FROM DAF| 31| 32| 33| 34|
35| 36| 37| 38| 39| 40| 41| 42|
43| 44| 45| 46| 47| 48| 49| 50|
51| 52| 53| 54| 55| 56| 57| 58|
59| 60
38° – 52° CROWN| MITER ANGLE| 20.3| 21.0|
21.8| 22.6| 23.3| 24.1| 24.9| 25.7| 26.5|
27.3| 28.2| 29.0| 29.9| 30.7| 31.6| 32.5|
33.4| 34.4| 35.3| 36.3| 37.2| 38.2| 39.2|
40.3| 41.3| 42.4| 43.5| 44.6| 45.7| 46.8
BEVEL ANGLE| 23.9| 24.7| 25.4| 26.1| 26.9|
27.6| 28.3| 29.0| 29.7| 30.4| 31.1| 31.8|
32.5| 33.2| 33.9| 34.5| 35.2| 35.8| 36.5|
37.1| 37.8| 38.4| 39.0| 39.6| 40.2| 40.8|
41.4| 41.9| 42.5| 43.0
45° CROWN| MITER ANGLE| 23.0| 23.8| 24.7|
25.5| 26.3| 27.2| 28.1| 28.9| 29.8| 30.7|
31.6| 32.5| 33.4| 34.3| 35.3| 36.2| 37.2|
38.1| 39.1| 40.1| 41.1| 42.1| 43.2| 44.2|
45.3| 46.4| 47.4| 48.5| 49.6| 50.8
BEVEL ANGLE| 21.4| 22.0| 22.7| 23.3| 23.9|
24.6| 25.2| 25.8| 26.4| 27.0| 27.6| 28.2|
28.8| 29.4| 30.0| 30.6| 31.1| 31.7| 32.3|
32.8| 33.3| 33.9| 34.4| 34.9| 35.4| 35.9|
36.4| 36.8| 37.3| 37.8
The Klein Tools 935DAF is a Digital Angle Finder that measures angles and calculates the saw blade angle needed for perfectly fitting miter cuts. The locking knob quickly secures the two rulers into the measured position for quick angle transfer.
GENERAL SPECIFICATIONS
- Measurement Range: 0° – 359.9°
- Accuracy: +/- 0.2°
- Resolution: 0.1°
- Operating/Storage Altitude: 6562 ft. (2000 m)
- Operating/Storage Temperature: 32° to 122°F (0° to 50°C)
- Operating/Storage Humidity: <85% relative humidity
- Dimensions: 8.5″ × 1.4″ × 0.9″ (216 mm × 35 mm × 22 mm)
- Weight: 6.76 oz. (191.6 g) with battery
- Battery: 1× AAA (Included)
- Drop Protection: 6′ (1.83 m)
- Ingress Protection: IP54
Specifications subject to change
WARNINGS
Read, understand, and follow these instructions to ensure safe operation.
Failure to observe these warnings can result in serious injury and/or property
damage.
- Always wear approved eye protection.
WARNING SYMBOLS ON PRODUCT
FEATURE DETAILS (FIG. A)
DEVICE
- Stainless Ferrum Rulers
- LED Display
- Miter Angle Button
- Hold / Supplementary Angle Button
- Power / ZERO Button
- Locking Knob
- Battery Door
LCD DISPLAY
- A. Measurement Value
- B. Low Battery Icon
- C. Hold Icon
- D. Supplementary Angle Icon
- E. Miter Angle Icon
- F. Degree Symbol
BUTTONS AND FUNCTIONS
POWER ON/OFF: Press the Power/Zero Button 5 to turn the 935DAF on. The 935DAF will begin displaying the degree offset between the 2 steel rulers. Press and hold the Power/Zero Button 5 to turn off.
NOTE: 935DAF will automatically power off after 15 minutes of inactivity.
ZERO: To set a reference angle, press the Power/Zero Button 5 while the unit is on. The measured value on the display will change to “0.0°”. At this point, all new measured angles will be in reference to this user-set reference angle. Ensure your product measures accurately from zero by folding the Digital Angle Finder until the blades are in line with each other on a flat surface and press the Power/Zero Button 5 .
HOLD: To hold a measurement value on the display, press the Hold Button 4 . When the hold function is active, the Hold Icon C will be illuminated on the display. The measured value will remain on the display until the Hold Button 4 is pressed again.
MITER SAW BLADE CALCULATOR: To calculate the needed miter saw blade angle
for a simple miter cut, press the Miter Button 3 ; the Miter Angle Icon E will
turn on. Then, measure the desired corner and the Digital Angle Finder will
automatically calculate and display the exact angle that your saw blade needs
to be set to for a perfectly fitted miter joint. Once measured, press the Hold
Button 4 to ensure your measurement is accurate as you set your saw blade. To
switch from the miter calculator function back to a true angle finder, press
the Miter Button 3 again; the Miter Angle Icon E will turn off. NOTE: In order
to determine the miter and bevel angles for a compound miter cut, repeat the
steps above and look up that measured value in the COMPOUND MITER CONVERSION
TABLE chart at the bottom of the page.
Simple Miter Angle Formula: Miter Angle = |90 – (Measured Angle/2)|
SUPPLEMENTARY ANGLE: Press and hold the Hold Button 4 to change the display from showing the true angle to showing the supplementary angle. The Supplementary Angle Icon D will display.
TIGHTEN/LOOSEN: Rotate the Locking Knob 6 clockwise to tighten the moving ruler. Rotate the Locking Knob 6 counterclockwise to loosen the moving ruler.
BATTERY REPLACEMENT
The Low Battery Icon B will appear when the battery needs to be replaced:
- Loosen the screw and remove the Battery Door 7 .
- Properly dispose of spent batteries and install new AAA battery, noting proper polarity.
- Replace Battery Door 7 and secure with screw.
CLEANING
Be sure device is turned off and wipe with a clean, dry, lint-free cloth. DO NOT use abrasive cleaners or solvents.
STORAGE
Remove battery when device is not in use for a prolonged period of time. Do
not expose to high temperatures or humidity. After a period of storage in
extreme conditions exceeding the limits mentioned in the General
Specifications section, allow the device to return to normal operating
conditions before using.
WARRANTY
DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local regulations. Please see epa. gov/recycle for additional information.
FCC & IC COMPLIANCE
See this product’s page at www.kleintools.com for
FCC compliance information. Canada ICES-003 (B) / NMB-003 (B)
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street, Lincolnshire, IL 60069
1-800-553-4676
customerservice@kleintools.com
www.kleintools.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>