Klein Tools ET05 Digital Pocket Thermometer Instruction Manual

: June 1, 2024
: KLEIN TOOLS

Table of Contents

Klein Tools ET05 Digital Pocket Thermometer
FEATURE DETAILS
GENERAL SPECIFICATIONS
WARNINGS
FUNCTION BUTTONS
OPERATING INSTRUCTIONS
MAINTENANCE
FREQUENTLY ASKED QUESTIONS
VIDEO – PRODUCT OVERVIEW
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Klein Tools ET05 Digital Pocket Thermometer

Klein-Tools-ET05-Digital-Pocket-Thermometer-product

FEATURE DETAILS

(FIG. 1)

FRONT OF UNIT

3″ Stainless Steel Probe
Protective Sheath/Handle
Backlit LCD Screen
Power Button
HOLD/MAX/MIN/AVG Button
°F/°C Select Button
BACK OF UNIT
Pocket Clip
Battery Compartment (inside base of pocket clip)

LCD DISPLAY

A. Measurement
E. AVG Icon
B. HOLD Icon
F. Battery Strength Indicator
C. MAX Icon
G. °F/°C Icon
D. MIN Icon
H. Auto Power-Off Icon

$Klein-Tools-ET05-Digital-Pocket-Thermometer-fig- $1$$

GENERAL SPECIFICATIONS

Klein Tools ET05 is a digital thermometer that takes ambient and direct- contact readings in both Farenheit (°F) and Celsius (°C) scales.

Measurement Range: -40 to 482°F (-40 to 250°C)
Resolution: 0.1°F/C
Accuracy:****
Range| Accurate To
---|---
-40 to -4°F (-40 to -20°C)| +/-3.6°F (+/- 2°C)
-3 to 302°F (-19 to 150°C)| +/-2.7°F (+/- 1.5°C)
303 to 392°F (150 to 200°C)| +/-5.4°F (+/- 3°C)
Above 392°F (200°C)| +/-7.2°F (+/- 4°C)
Temperature stability: 3 seconds
Batteries: 2x LR44 Button Cell
Operating Altitude: 6562 ft. (2000 m)
Operating Temp: 32° to 122°F (0° to 50°C)
Storage Temp: -4° to 140°F (-20° to 60°C)
Relative Humidity:
- Operating: 10% to 90% non-condensing
- Storage: <80% non-condensing
Dimensions: 6.50″ x 1.08″ x 0.96″ (165 x 27 x 24 mm)
Weight: 1.3 oz. (37 g) including batteries
Pollution degree: 2
Drop Protection: 9.8 ft. (3 m)
Stainless steel probe: Complies with FDA/GRAS (Generally Recognized As Safe) requirements.

NOTE: Although the thermometer can measure up to 482°F (250°C), the plastic body and sheath are rated only to 160°F (71°C).

DO NOT expose the thermometer to temperatures above 160°F (71°C); only the stainless steel probe can withstand temperatures above 160°F (71°C), and only for a short time. Specifications are subject to change.

WARNINGS

To ensure safe operation and service of the thermometer, follow these instructions. Failure to observe these warnings can result in severe injury or death.

Read the instructions to ensure safe operation.
The thermometer is NOT insulated. Avoid contact with areas where energized conductive elements may be present. Shut off power to the area before starting measurements.
The thermometer is NOT intended for use on people or animals.
Although the thermometer can measure up to 482°F (250°C), the plastic body and sheath are rated only to 160°F (71°C). DO NOT expose the thermometer to temperatures above 160°F (71°C); only the stainless steel probe can withstand temperatures above 160°F (71°C), and only for a short time.
Always wear approved eye protection and any other personal protective equipment (PPE) as required.

FUNCTION BUTTONS

ON/OFF BUTTON 4
Press the Power Button to power on and off the thermometer.
AUTO POWER-OFF
Auto Power-Off will automatically turn off the meter after 15 minutes of inactivity. When powered on, Auto Power-Off is enabled by default. To disable the Auto Power-Off function, press and hold the HOLD/MAX/MIN/AVG Button 5 while powering on. The Auto Power-Off icon H will disappear from the display. After powering off, the Auto Power-Off function will be enabled when powered on again; repeat this process to disable it again.
°F/°C SELECT BUTTON 6
The thermometer’s default measurement scale upon power-up is Fahrenheit (°F). Press the °F/°C button to toggle between Fahrenheit (°F) and Celsius (°C).
HOLD/MAX/MIN/AVG BUTTON 5
The HOLD/MAX/MIN/AVG button toggles between (in order) Hold, Max, Min, Average (AVG), and Data Point modes. Data is refreshed with every entry.
- HOLD: Holds the current reading until the mode is changed.
- MAX: Displays the highest temperature measured.
- MIN: Displays the lowest temperature measured.
- AVG: Displays an average of the temperature while scanning.
- Data Point mode displays the number of data points collected.
  To return to normal measuring mode, press the HOLD/MAX/MIN/AVG button for more than two seconds.
BACKLIGHT
To activate the Backlight, press the HOLD/MAX/MIN/AVG button 5 and the °F/°C button 6 simultaneously. The backlight will automatically deactivate after approx. 30 seconds; repeat this process to reactivate.

OPERATING INSTRUCTIONS

Power on the thermometer and select the °F or °C range, as described in the FUNCTION BUTTONS section.
The thermometer will begin measuring temperature immediately upon power-up. Ambient environmental temperatures may be measured with the protective sheath in place. Remove the sheath for direct-contact temperature measurements. NOTE: The sheath can be attached to the back of the thermometer body to act as a handle/extension, as shown in FEATURE DETAILS.
CAUTION: To avoid accidental injury, always keep the protective sheath secured over the probe when not taking direct-contact measurements.
NOTE: The warning “OR” will appear on the LCD display if the attempted measurement is outside of the thermometer’s range.
Refer to the FUNCTION BUTTONS section to use other features such as HOLD, MAX, MIN, and AVG (Average).

MAINTENANCE

BATTERY REPLACEMENT

When the Low Battery indicator is displayed on the LCD, the batteries must be replaced.

Rotate the pocket clip 7 approx. 90 degrees counterclockwise as shown to expose the battery compartment (FIG. 2).
Remove and recycle the two spent LR44 batteries (FIG. 3).
Install two new LR44 batteries, with the positive (+) side facing up as shown (FIG. 3).
Replace pocket clip and rotate approx. 90 degrees clockwise to lock into place (FIG. 2).

CLEANING

Be sure the thermometer is turned off and wipe with a clean, dry lint-free cloth. Do not use abrasive cleaners or solvents.

STORAGE

Remove the batteries when the meter is not in use for a prolonged period of time.
Do not be exposed to high temperatures or humidity.
After a period of storage in extreme conditions exceeding the limits mentioned in the General Specifications section, allow the thermometer to return to normal operating conditions before using.

WARRANTY

www.kleintools.com/warranty

DISPOSAL / RECYCLE

Do not place equipment and its accessories in the trash. Items must be properly disposed of in accordance with local regulations. Please see www.epa.gov or www.erecycle.org for additional information.

CUSTOMER SERVICE

KLEIN TOOLS, INC. 450 Bond Street Lincolnshire, IL 60069

FREQUENTLY ASKED QUESTIONS

What is the brand and model of the digital pocket thermometer?

The brand is Klein Tools, and the model is ET05 Digital Pocket Thermometer.

What special features does the Klein Tools ET05 Digital Pocket Thermometer offer?

The Klein Tools ET05 Digital Pocket Thermometer includes Max/Min, Hold, and Average functions, along with an Auto Power Off feature for convenience.

What type of display does the Klein Tools ET05 Digital Pocket Thermometer have?

The Klein Tools ET05 Digital Pocket Thermometer features a digital display, providing clear and easy-to-read temperature readings.

How is the Klein Tools ET05 Digital Pocket Thermometer powered?

The Klein Tools ET05 Digital Pocket Thermometer is powered by 2 LR44 batteries, providing portability and long-lasting usage.

What are the product dimensions of the Klein Tools ET05 Digital Pocket Thermometer?

The product dimensions of the Klein Tools ET05 Digital Pocket Thermometer are 1.08 x 0.94 x 6.5 inches, making it compact and suitable for pocket or tool belt storage.

What is the weight of the Klein Tools ET05 Digital Pocket Thermometer?

The Klein Tools ET05 Digital Pocket Thermometer weighs 1.4 ounces, ensuring it is lightweight and easy to carry around.

How many batteries are required to operate the Klein Tools ET05 Digital Pocket Thermometer?

The Klein Tools ET05 Digital Pocket Thermometer requires 2 LR44 batteries for power, which are included with the product.

What is the price of the Klein Tools ET05 Digital Pocket Thermometer?

The price of the Klein Tools ET05 Digital Pocket Thermometer is $15.97, offering affordability for its functionality and quality.

What should I do if the Klein Tools ET05 Digital Pocket Thermometer is not turning on?

First, ensure that the LR44 batteries are properly inserted and have sufficient charge. If the thermometer still doesn't turn on, try replacing the batteries with new ones.

What steps should I take if the Klein Tools ET05 Digital Pocket Thermometer display is malfunctioning?

Check for any visible damage to the display or connections. Try resetting the thermometer by removing and reinserting the batteries. If the display still malfunctions, contact Klein Tools customer support for assistance.

What should I do if the Klein Tools ET05 Digital Pocket Thermometer is not responding to button presses?

Ensure that the buttons are not stuck or obstructed. Try cleaning around the buttons with a soft cloth.

How can I troubleshoot connectivity issues with the Klein Tools ET05 Digital Pocket Thermometer?

The Klein Tools ET05 Digital Pocket Thermometer typically does not have connectivity features. However, if you're experiencing issues with temperature readings, ensure the thermometer is properly calibrated and positioned.

What should I do if the Klein Tools ET05 Digital Pocket Thermometer is displaying error codes or messages?

Refer to the user manual to understand the meaning of any error codes or messages displayed. Follow any troubleshooting steps provided in the manual.

How can I troubleshoot a malfunctioning auto power-off feature on the Klein Tools ET05 Digital Pocket Thermometer?

Check the settings to ensure the auto power-off feature is enabled. If it's enabled and still not functioning properly, try resetting the thermometer.

How can I troubleshoot inconsistent temperature readings on the Klein Tools ET05 Digital Pocket Thermometer?

Ensure that the thermometer is properly calibrated and positioned for accurate readings. Avoid exposing it to extreme temperatures or moisture.